Petainer PET851 User manual

Notes: After turning on the , If the green LED indicator
turns to a blinking red light, the battery needs to be replaced.
When you set the dial on the 5 Level, it may be sensitive
enough that the No Bark Collar can be activated easily by a small
sound or tap.
No Bark Collar: 1X4LR44/6V
3. Test by scratching the surface of the test tool rough on the
using a fingernail (as shown in the diagram) or pen.
collar turns to a blinking
green light. Then repeat
the same process if you
want to try it again.
The green light on the top of
2. Set the Sensitivity Dial to the 5 Level.
,,
,,
Testing
1. Turn the on by turning OFF & Intensity Dial and set to
the intensity level you prefer.
,,
,,
,
Owner s Manual
PET851

ON-OFF & Intensity Dial
This Dial is to turn the on/off and select the
intensity level of stimulation
Level 1 is lowest electrical stimulation
and Level 7 is the highest.
OFF position is to turn off the .
,,
,,
OFF
1
2
3
4
5
6
7
Main Features
Small size and light weight
7 intensity levels (1-7) for a wide variety of dispositions
5 Sensitivity levels (1-5) adjustable for different dogs and
environments
Easy testing method to check the No Bark Collar
Waterproof
Multi-Color LED Battery
Life Indicator
Replaceable 6-Volt
alkaline battery
1
2
3
4
5
Sensitivity Dial
The sensitivity Dial is to adjust the sensitivity to the Dog
Bark according to the environments the dog is in.
Level 5 is the most sensitivity
and Level 1 is the lest.
When testing the ,
set it to the level 5.
Installing The Battery
1) Open the battery cap by using a coin, inserting it in the slot
and turning counterclockwise.
2) Insert the battery and please put the negative( ) end facing
of the battery inside.
3) Put the battery cap back in a
clockwise direction.
Auto-Protection Mode
To protect your dog from the excessive
stimulation, our no-bark collar has
auto-protection mode. If the Petrainer
continuously activates for 5 times, it
will switch to be off for 1 minutes
while the LED indicator will turn
to a blinking red and green
light. After 1 minutes, the
LED indicator will be off
and the Petrainer is back
to Sleep mode.