Petsafe Collarless Remote Trainer User manual

PetSafe®
Collarless Remote Trainer
Operating Guide
Please read this entire guide before beginning
N
P

2 1-800-732-2677
Thank you for choosing PetSafe®, the #1 selling brand of electronic
training solutions in the world. Our mission is to ensure your pet’s safety
by providing you the tools and techniques to successfully train your pet. If
you have any questions, please contact the Customer Care Center at
1-800-732-2677 or visit our website at www.petsafe.net.
__________________________________
Table of Contents
How the System Works ......................................................................... 3
Key Definition ..................................................................................... 3
Operating Guide
Prepare the Remote Trainer .............................................................. 4
Operating the Remote Trainer ........................................................... 5
Cautions .......................................................................................... 5
Training Guide
General Tips .................................................................................... 6
TeachingYour Pet the Positive Tone................................................... 6
Using the Negative Tone ................................................................... 7
Teaching Basic Obedience
The “Sit” Command .................................................................... 8
The “Come” Command ............................................................... 9
The “Stay” Command ................................................................ 10
Eliminating Unwanted Behavior
Jumping Up ............................................................................... 11
Digging...................................................................................... 11
Chasing...................................................................................... 12
Trash Raiding............................................................................. 13
Excessive Barking ....................................................................... 14
Terms of Use and Limitation of Liability ............................................. 14
FCC Compliance............................................................................... 15

www.petsafe.net 3
How the System Works
The Collarless Remote Trainer is designed to assist you with obedience
training and the behavior modification of your dog or cat by taking
advantage of the sensitive hearing of your pet in the ultrasonic frequency
range which is inaudible to most humans. The Negative Tone Button
activates the ultrasound, which startles your pet more than yelling or a firm
voice command. The Positive Tone Button activates an audible tone that
will help indicate to your pet that his behavior is acceptable to you. The
Remote Trainer will not disturb your neighbors or other nearby humans.
__________________________________
Key Definitions
Indicator Light: The light that indicates when any button on the Remote
Trainer is pressed.
Negative Tone Button (N): The button that emits an ultrasonic tone
used to correct your pet.
Positive Tone Button (P): The button that emits a positive tone to your
pet.
N
PPositive Tone Button
Negative Tone Button
Indicator Light

4 1-800-732-2677
Operating Guide
Prepare the Remote Trainer
To Insert and Remove the Battery
1. Remove the screws on the back of the Remote Trainer.
2. Insert the 9-volt alkaline battery.
3. Reinstall the screws. Do not over-tighten the screws.
2
1
To verify the battery has been inserted correctly, activate the Remote
Trainer by pressing the Positive Tone Button (P). The Remote Trainer
should beep and the Indicator Light should glow.
Battery Life
Under typical training conditions, the battery should last up to one year.
It is recommended that the battery be replaced on an annual basis to help
maintain optimal operation.
The Collarless Remote Trainer is powered by one 9-volt alkaline battery.
Do not use a carbon-zinc or rechargeable nickel-cadmium battery because
they will not provide enough current, resulting in a decreased range.

www.petsafe.net 5
Operating the Remote Trainer
Use the Collarless Remote Trainer for training within a range of 30 feet
(10 meters). Point the device at your pet for optimal results.
• To activate the ultrasonic correction, push and hold the button labeled “N”
• To activate the positive sound, push and hold the button labeled “P”
Cautions
• The Collarless Remote Trainer should be stored in a dry place at room
temperature.
• Never place the Collarless Remote Trainer directly next to the ear of any
human or animal. The high intensity ultrasound could be harmful.
• Do not drop the Collarless Remote Trainer.
• Never push the Negative Tone Button for more than two consecutive
seconds.
• The Collarless Remote Trainer is not intended as a defensive or protective
device against vicious or aggressive animals.

6 1-800-732-2677
Training Guide
General Tips
• Eliminate one misbehavior or teach one obedience command at a time. If
you move too fast with training, your pet may become confused.
• Be consistent. Correct your pet every time he misbehaves.
• Unless you can supervise him, it is recommended that you restrict your
pet from situations in which he has a history of misbehaving. However,
setting up a situation as a training session can dramatically improve your
chances of success.
• If your pet reacts to the tones by hiding or acting fearful, redirect his
attention to a simple and appropriate behavior, such as the “sit” command.
• When pressing the Negative Tone Button, do not say anything to your
pet. Reserve your verbalization for when he is behaving appropriately.
• Pets should be at least 6 months old before using the Trainer.
• Only let responsible family members use the Trainer. It is not a toy!
• Other pets in hearing range will be affected by the training tones.
Therefore, training sessions should be conducted out of hearing range of
other pets.
• Never use the Collarless Remote Trainer to correct or eliminate any form
of aggressive behavior. We recommend you contact your local veterinarian
or professional trainer to determine if your pet might be aggressive.
Teaching Your Pet the Positive Tone
Before using the Trainer to correct your pet, spend 10 to 15 minutes per
day for 2 or 3 days helping him create the association of the positive tone
with reward and praise.To accomplish this:
1. Push the “P” button for 2 consecutive seconds.
2. Release the button and immediately reward your pet with verbal praise,
petting, or a small food reward. Spend 3 to 5 seconds on your rewarding.
3. Wait a few minutes and repeat holding the “P” button for 2 seconds
following with praise.
Vary the reward to prevent your pet from anticipating a specific type. This
stage of training is complete when your pet obviously anticipates a reward
when he hears the positive tone.

www.petsafe.net 7
Using the Negative Tone
As soon as your pet begins the earliest sign of misbehavior, press the “N”
button. For example, if you want to teach your dog to stay off the couch,
press the “N” button as soon as he puts one paw on it. Do not wait until
he is completely on the couch.
1. Hold the “N” button for up to 2 seconds at a time, releasing the button
as soon as your pet stops the misbehavior.
2. If your pet has not stopped the misbehavior after two seconds of
correction, release the “N” button, then press it again for up to two
consecutive seconds.
3. Continue this sequence until the misbehavior has stopped.
4. Once the misbehavior has stopped, count out two seconds and then
push the “P” button for two consecutive seconds.
5. Reward your pet following pushing the “P” button approximately once
every 3 to 5 times, to help your pet maintain the association of the
positive tone with reward.

8 1-800-732-2677
Teaching Basic Obedience
The “Sit” Command
1. Put a 10-foot leash on your pet.
2. Hold the leash and the Remote Trainer in one hand. Keep your other
hand free to guide your pet into a “Sit” position.
3. Press and hold the “N” Button.
4. Immediately give the “Sit” command while continuing to hold the “N”
Button.
5. Release the “N” Button as soon as your pet is in position, and press and
hold the “P” Button for 2 seconds.
6. Release your pet from the “Sit” command and play.
7. Repeat Steps 2 through 6.
Note: If your pet breaks the “Sit” command, repeat steps 3 through 6. Keep your
pet close to you while teaching the “Sit” command.

www.petsafe.net 9
The “Come” Command
1. Put a 10-foot leash on your pet.
2. Hold your leash in one hand and
the Remote Trainer in the other.
3. Wait for your pet to walk away
from you. Press and hold the “N”
Button on your Remote Trainer.
4. Immediately give the command
“Come”.
5. Using the leash, gently guide your
pet toward you until he begins to
come in your direction.
6. Immediately release the “N”
Button as soon as your pet steps
towards you, and press and hold
the “P” button for 2 seconds.
7. Quickly move backwards as your
pet begins to come back to you,
praising him the entire time.
8. Praise your pet when he returns to you.
9. Repeat Steps 3 through 8.
10. Once your pet responds readily to the
“Come” command several times, back away
from him without giving a command.When
your pet turns toward you, give the command
“Come” (DO NOT PRESS THE “N”
BUTTON) and praise him while you continue
to back up. Press the “P” button when your pet returns to you.
11. Use your leash to prevent your pet from running past you. If your pet
manages to run past you, repeat Steps 3 through 8.

10 1-800-732-2677
The “Stay” Command
1. Put a 10-foot leash on your pet.
2. Put your pet on his bed. Hold your leash in one hand and the Remote
Trainer in the other.
3. Staying within 3 feet, walk the perimeter of the bed. Do not say anything
to your pet.
4. If your pet tries to leave the bed, press and hold the “N” Button and give
the “Stay” command. Continue to hold the button until your pet is back
on his bed. If necessary, use the leash to guide your pet onto his place.
5. When your pet is back on his bed, press and hold the “P” Button for 2
seconds.
6. Once your pet has settled for a few seconds, release him and play calmly.
7. Repeat steps 1 through 5.

www.petsafe.net 11
Eliminating Unwanted Behavior
Jumping Up
Pets typically jump up to get attention. If you do not want your pet to
jump on you, then friends or members of the family should not encourage
this behavior. That means every time your pet jumps on someone, he
should be reprimanded or redirected to an alternate and acceptable
behavior, for which he can receive praise.
Note: It is best if your pet first understands the “Sit” command.
1. As soon as your pet lifts his paws
off the ground to jump on you,
press the “N” Button and give the
command “Sit.”
2. Release the “N” Button
immediately once your pet is
sitting, and press and hold the “P”
Button for 2 seconds.
3. Practice this exercise in several
different areas and use different people for distractions.
Digging
It is important to first understand why your pet is digging. Many dogs,
such as terriers, were bred to flush out prey, and digging is very innate to
them. Other dogs may be digging to find a cool spot to lie down, or simply
out of boredom.Your pet may no longer have the desire to dig if he is
provided with the following:
• A cool, shaded area in which to lie down, and plenty of water.
• An alternate activity, such as a favorite toy.
• Plenty of play, exercise, and attention.
• A yard free from rodents or prey that he may be trying to flush out.
1. No other people or pets should be in the yard during training sessions,
as you do not want your pet to associate the correction with anything
other than his digging.Your pet must be securely fenced in or contained
during training.

12 1-800-732-2677
2. From a window or area where your pet cannot see you, wait until your
pet begins to dig.
3. While your pet digs, press the “N” Button and release it when he stops
digging. Only press the button while your pet is in the act of digging,
and do not say anything to him.
4. Continue to watch your pet, as he may choose another area to dig.
5. Do not allow your pet in the yard unsupervised until he has completely
stopped digging.
Chasing
Chasing is an instinctive behavior stimulated by moving objects. Some
dogs have a particularly strong desire to chase that can put them in harm’s
way and leave you helpless. Never allow your dog off the leash or out of a
contained area until he has learned the “Come” command, regardless of
the distraction. Be consistent and correct your dog every time he chases
something.
1. If your dog has not learned the “Come” command, keep a leash on
him so you can physically stop him before he reaches the object he is
chasing.
2. Set up a scenario where your dog is enticed to chase an object. Common
items could be cars, motorcycles, bicycles, etc. (do not use toys).
3. When the object passes in front of your dog, make sure to hold the leash
with a firm grip. As soon as your dog begins to chase the object, press
and hold the “N” Button until he stops.
4. When your dog stops chasing the object, immediately release the button,
walk backwards and give the command “Come.” Press and hold the “P”
Button for 2 seconds.

www.petsafe.net 13
5. Repeat the process until your dog stops chasing the object.
Trash Raiding
The easiest way to prevent trash raiding is to remove garbage and tempting
food from your pet’s environment.You can use the Remote Trainer to teach
your pet to stay away from these items; however, you must be prepared to
correct your pet every time he approaches them.
1. Pick a temptation for your pet and
position yourself where he cannot
see you.
2. While your pet’s mouth is touching
the temptation, press and hold the
“N” Button. Immediately release
the button when your pet leaves the temptation.
3. Do not say anything, as you want your pet to associate the correction with
his behavior, not you.
4. Repeat this process in several different locations with different
temptations.

14 1-800-732-2677
Excessive Barking
Barking is an instinctive behavior for dogs. It is impossible to keep your
dog from barking entirely, but you can teach him be quiet when you give
him a command.
Note:This will only be effective when you are at home with your dog.
1. Put your dog in a situation that will tempt him to bark.
2. When your dog begins to bark, press the “N” Button and give him the
command “Quiet.”
3. Immediately release the button once your dog stops barking and press
and hold the “P” button for 2 seconds.
4. Practice this exercise in different areas using different situations that
would cause your dog to bark.
Terms of Use and Limitation of Liability
1. Terms of Use
This Product is offered to you conditioned upon your acceptance without
modification of the terms, conditions and notices contained herein. Usage
of this product implies acceptance of all such terms, conditions, and
notices.
2. Proper Use
This Product is designed for use with pets where training is desired. The
specific temperament of your pet may not work with this product. We
recommend that you not use this product if your pet is less than 8 pounds
or if your pet is aggressive. If you are unsure whether this is appropriate for
your pet, please consult your veterinarian, certified trainer or contact our
Customer Care Center at [phone].
Proper use includes reviewing the entire Operating and Training Guide
provided with your product and any specific Caution statements.
3. No Unlawful or Prohibited Use
This Product is designed for use with pets only. This pet training device is
not intended to harm, injure, or provoke. Using this product in a way that
is not intended could result in violation of Federal, State or local laws.

www.petsafe.net 15
4. Limitation of Liability
In no event shall Radio Systems Corporation be liable for any direct,
indirect, punitive, incidental, special or consequential damages, or any
damages whatsoever arising out of or connected with the use or misuse
of this Product. Buyer assumes all risks and liability from the use of this
Product.
5. Modification of Terms and Conditions
Radio Systems Corporation reserves the right to change the terms,
conditions and notices under which this Product is offered.
FCC Compliance
Radio Systems Corporation makes its products under strict FCC
guidelines and specifications to comply with FCC specifications. Radio
Systems Corporation certifies that its products comply with Part 95 of
FCC regulations. Unauthorized changes or modifications to the equipment
that are not approved by Radio Systems Corporation are in violation
of FCC regulations and could void the user’s authority to operate the
equipment and void the product warranty.

Radio Systems Corporation
10427 Electric Ave.
Knoxville, TN 37932
1-800-732-2677
www.petsafe.net
400-683
©Copyright 2004, Radio Systems Corporation