PhDsolutions HDMI-LSP Installation manual

CS-HHP
Compact Inline Surge Protector
Operation Manual
Operation Manual
HDMI-LSP
Compact Inline HDMI Surge Protector

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
suffi cient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 10/07/16 Preliminary Release

CONTENTS
1. Introduction....................................................... 1
2. Applications...................................................... 1
3. Package Contents ........................................... 1
4. System Requirements....................................... 1
5. Features............................................................. 2
6. Operation Controls and Functions.................. 3
7. Connection Diagram ....................................... 4
8. Specifi cations ................................................... 5
9. Support Timing Table & HDMI Cable Length .. 6
9.1 Support Timing Table ................................... 6
9.2 HDMI Cable Length ..................................... 6

1
1. INTRODUCTION
Unexpected voltage spikes and ESD (Electrostatic discharge) are
the primary causes of component damage and failure over HDMI.
This compact surge protector is designed to protect connected
sources and sink (display) devices by blocking or shorting to ground
unexpected voltage spikes and surges. The compact design of the
surge protector has an HDMI input and HDMI output which allows the
user to place it in line with the source or sink (display) devices like AV
receivers, HDMI matrices, TV's or Satellite/Cable set-top boxes.
2. APPLICATIONS
• Entertainment Room & Home Theater
• Show Room & Demo Room
• Lecture Room & Hall Presentation
• Public Commercial Display
3. PACKAGE CONTENTS
• 1 x Surge protector unit
• 1 x Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as PS3/Blu-ray player and output UHD TV
or display or connects between matrix/scaler and displays/projector

2
2
5. FEATURES
• HDCP 1.4 and 2.2 content pass through
• Compact design with HDMI input and output interface to fi t most of
electronic devices
• Maximum supported pass through resolution up to 3840x2160@24/25
and 30
• 3D contents pass through supported
• LPCM, Dolby and DTS audio formats pass through supported
• CEC pass thought supported
• Easily installation only connects it between source and sink devices
• 5V overvoltage protection circuit design to prevent higher voltage
damaged devices
• 5V overvoltage protection circuit design to prevent higher voltage
damage to devices
• ESD (ElectroStatic Discharge) protection up to ±15kV (Air) / ±8kV
(Human Contact)

3
3
6. OPERATION CONTROLS AND FUNCTIONS
HDMI IN
HDMI SURGE PROTECTOR
HDMI OUT
1 2
1HDMI OUT
Connects with displays or projector.
2HDMI IN
Connects the source equipment such as DVD player or matrix /
scaler unit.

4
4
7. CONNECTION DIAGRAM
Display
DVD player
HDMI IN
HDMI SURGE PROTECTOR
HDMI OUT
HDMI Cable
HDMI Cable

5
5
8. SPECIFICATIONS
Input Ports 1 x HDMI
Output Ports 1 x HDMI
Over voltage protection 5V
Supported Resolution 480 i to 4K2K YUV 4:2:0
Supported audio formats LPCM, Dolby, DTS
Support audio sampling
rate
32kHz ~ 192kHz
EDID Bypass
Audio Return Channel Bypass
3D content Bypass
CEC Bypass
Deep color 8 bit, 10 bit and 12 bit
HDMI transmission
distance
5 meter for HDMI Input and output (3840
x 2160)
ESD ±15kV (Air) / ±8kV (Contact)
Chassis Material Plastic
Chassis Color Black
Weight 56g
Dimensions 482mm(W) x 354mm(D) x 96mm(H)

6
6
9. SUPPORT TIMING TABLE & HDMI CABLE LENGTH
9.1 Support Timing Table
HDMI IN & OUT RESOLUTION SUPPORTED
480i 
576i 
480p 
576p 
640x480
800x600
1080i @50&60 
1080p@50&60 
1024x768 
1360x768
1280x1024 
1600x1200 
1920x1200 
3840x2160p@24&25&30 
3840x2160p@60(YUV420) 
4096x2160p@24 
4096x2160p@50 & 60(YUV420) 
9.2 HDMI Cable Length
HDMI CABLE LENGTH (MAX)
Resolution Input Output
3840x2160p 5m 5m

7
PhD Solutions Product Warranty
Should you feel your product does not function adequately due to defects in materials or
workmanship, PhD Solutions (hereby referred to as “the warrantor”) will, for the length of the
period
indicated below:
a) Repair the product with new or
refurbished parts.
or
b) Replace it with a new or refurbished product.
Limited Warranty Period
Commencing from the original date of purchase, all PhD Solutions products are covered by a
one
year PARTS and LABOUR warranty depending on the product.
Please contact your PhD Solutions dealer for details.
During this period there will be no charge for unit repair, replacement of parts, unit
components or
replacement of product if necessary. The decision to repair or replace will be
made by the warrantor.
The purchaser must mail-in or return the product to PhD Solutions
during the warranty period.
This limited warranty only covers the product purchased as new and is extended to the
original
purchaser only. It is non-transferable to subsequent owners, even during the
warranty period.
A purchase receipt or other proof of original purchase date is required for the limited warranty
service.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER
WILL BE
REQUIRED TO PRODUCE A SALES RECEIPT/PROOF OF PURCHASE
INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
Please note: THE CUSTOMER WILL BE CHARGED FOR PARTS OR REPAIR
OF
ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Premium high Definition Solutions
19
Product Service Provided
1. Damage requiring service
All units should be serviced by a PhD Solutions qualified service person.:
2. Servicing Personnel
Do not attempt to service the unit beyond that described in these operating instructions.
Refer all
other servicing to authorised PhD Solutions servicing personnel.
Return to Supplier
When shipping the unit, carefully pack and send it prepaid (preferably in the original packaging)
with a
tracking number and adequate insurance. Please include a document or letter detailing
the reason for
return and include a daytime telephone number and/or email address where you
can be contacted.
If repair is required during the limited warranty period, the purchaser will be required to
provide a
sales receipt or other proof of purchase, indicating date and location of purchase as
well as the price
paid for the product. The customer will be charged for the repair or
replacement of any unit received
unless such information is provided.
Warranty Limits and Exclusions
1. This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship and
DOES NOT COVER normal wear and tear or cosmetic damage.
The limited warranty also DOES NOT COVER damage that occurs in shipment or failures
caused by
products not supplied by the warrantor.
Failures resulting from accident, misuse, abuse, neglect, mishandling, misapplication,
alteration,
incorrect installation, set-up adjustment, implementation of/to consumer controls,
improper
maintenance, power line surge, lightening damage, Electro static discharge (ESD)
,modification,
service by anyone other than a manufacturer-approved service center or
factory-authorised
personnel, or damage attributable to acts of God.
Premium high Definition Solutions
20

8
Product Service Provided
1. Damage requiring service
All units should be serviced by a PhD Solutions qualified service person.:
2. Servicing Personnel
Do not attempt to service the unit beyond that described in these operating instructions.
Refer all
other servicing to authorised PhD Solutions servicing personnel.
Return to Supplier
When shipping the unit, carefully pack and send it prepaid (preferably in the original packaging)
with a
tracking number and adequate insurance. Please include a document or letter detailing
the reason for
return and include a daytime telephone number and/or email address where you
can be contacted.
If repair is required during the limited warranty period, the purchaser will be required to
provide a
sales receipt or other proof of purchase, indicating date and location of purchase as
well as the price
paid for the product. The customer will be charged for the repair or
replacement of any unit received
unless such information is provided.
Warranty Limits and Exclusions
1. This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship and
DOES NOT COVER normal wear and tear or cosmetic damage.
The limited warranty also DOES NOT COVER damage that occurs in shipment or failures
caused by
products not supplied by the warrantor.
Failures resulting from accident, misuse, abuse, neglect, mishandling, misapplication,
alteration,
incorrect installation, set-up adjustment, implementation of/to consumer controls,
improper
maintenance, power line surge, lightening damage, Electro static discharge (ESD)
,modification,
service by anyone other than a manufacturer-approved service center or
factory-authorised
personnel, or damage attributable to acts of God.
Premium high Definition Solutions
20
Product Service Provided
1. Damage requiring service
All units should be serviced by a PhD Solutions qualified service person.:
2. Servicing Personnel
Do not attempt to service the unit beyond that described in these operating instructions.
Refer all
other servicing to authorised PhD Solutions servicing personnel.
Return to Supplier
When shipping the unit, carefully pack and send it prepaid (preferably in the original packaging)
with a
tracking number and adequate insurance. Please include a document or letter detailing
the reason for
return and include a daytime telephone number and/or email address where you
can be contacted.
If repair is required during the limited warranty period, the purchaser will be required to
provide a
sales receipt or other proof of purchase, indicating date and location of purchase as
well as the price
paid for the product. The customer will be charged for the repair or
replacement of any unit received
unless such information is provided.
Warranty Limits and Exclusions
1. This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship and
DOES NOT COVER normal wear and tear or cosmetic damage.
The limited warranty also DOES NOT COVER damage that occurs in shipment or failures
caused by
products not supplied by the warrantor.
Failures resulting from accident, misuse, abuse, neglect, mishandling, misapplication,
alteration,
incorrect installation, set-up adjustment, implementation of/to consumer controls,
improper
maintenance, power line surge, lightening damage, Electro static discharge (ESD)
,modification,
service by anyone other than a manufacturer-approved service center or
factory-authorised
personnel, or damage attributable to acts of God.
Premium high Definition Solutions
20

9
Product Service Provided
1. Damage requiring service
All units should be serviced by a PhD Solutions qualified service person.:
2. Servicing Personnel
Do not attempt to service the unit beyond that described in these operating instructions.
Refer all
other servicing to authorised PhD Solutions servicing personnel.
Return to Supplier
When shipping the unit, carefully pack and send it prepaid (preferably in the original packaging)
with a
tracking number and adequate insurance. Please include a document or letter detailing
the reason for
return and include a daytime telephone number and/or email address where you
can be contacted.
If repair is required during the limited warranty period, the purchaser will be required to
provide a
sales receipt or other proof of purchase, indicating date and location of purchase as
well as the price
paid for the product. The customer will be charged for the repair or
replacement of any unit received
unless such information is provided.
Warranty Limits and Exclusions
1. This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship and
DOES NOT COVER normal wear and tear or cosmetic damage.
The limited warranty also DOES NOT COVER damage that occurs in shipment or failures
caused by
products not supplied by the warrantor.
Failures resulting from accident, misuse, abuse, neglect, mishandling, misapplication,
alteration,
incorrect installation, set-up adjustment, implementation of/to consumer controls,
improper
maintenance, power line surge, lightening damage, Electro static discharge (ESD)
,modification,
service by anyone other than a manufacturer-approved service center or
factory-authorised
personnel, or damage attributable to acts of God.
Premium high Definition Solutions
20
2. There are no express warranties except as listed under “limited warranty coverage.” The
warrantor
is not liable for incidental or consequential damage resulting from the use of this
product or arising out
of any breach of this warranty.
¥ For example: damage for lost time, the cost of having a person/persons remove or re-
install
previously installed equipment, travel to and from service location, loss of or
damage to
media, images, data or other recorded/stored content.
ANY PARTS AND SERVICE NOT COVERED BY THIS LIMITED WARRANTY ARE
THE RESPONSIBILITY OF THE CUSTOMER.
Premium high Definition Solutions
Website http ://www.phdsolutions.co
21
2. There are no express warranties except as listed under “limited warranty coverage.” The
warrantor
is not liable for incidental or consequential damage resulting from the use of this
product or arising out
of any breach of this warranty.
¥ For example: damage for lost time, the cost of having a person/persons remove or re-
install
previously installed equipment, travel to and from service location, loss of or
damage to
media, images, data or other recorded/stored content.
ANY PARTS AND SERVICE NOT COVERED BY THIS LIMITED WARRANTY ARE
THE RESPONSIBILITY OF THE CUSTOMER.
Premium high Definition Solutions
Website http ://www.phdsolutions.co
21

Premium High Denion Soluons
Home page: http://www.phdsolutions.co