PHI VILLA 26'' Steel Wood Burning Fire Pit User manual

ASSEMBLY INSTRUCTIONS
USER’S MANUAL
Before starting assembly:
Read all instructions throughly.
Open and check boxes for parts list.
If any parts are broken or missing call or email customer service.
Keep all packaging until you are satisfied with your product.
Returns are not accepted without original packaging.
Make sure you have ample space for assembly.




WARNING:
DO NOT FULLY TIGHTEN ALL SCREWS UNTIL ASSEMBLY
IS COMPLETE.
DO NOT strain yourself. Some items are easier to assemble with
the help of another person.
DO NOT force bolts or nuts. If a nut becomes stick, unscrew it
and start again.
DO NOT assemble on an uneven surface to prevent any damage
and to ensure proper assembly.



Customer Service:
1-877-606-2818
Open Monday through Sunday
9am-6pm PST
[e-mail]

Assembly Instruction
Product Name: 26’’ Steel Wood Burning Fire Pit
WARNINGS:
•This fire bowl is intended for outdoor use only. Do not use on wooden decks.
•This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other
combustible materials in the fire bowl.
•Not for use by children. Keep children and pets away from the fire bowl.
•The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare hands.
•Never leave the burning fire bowl unattended, and always extinguish the fire completely
before leaving the fire bowl.
•Do not use near flammable or combustible objects or materials.
•When the fire bowl is in use, the handle on the mesh screen can reach extreme
temperatures that can cause serious injury to an unprotected hand. Use a poker or an
appropriate heat resistant glove or pad when handling.
•Check local fire regulations and municipal by-laws for safe use.
•Some parts may contain sharp edges—especially as noted in the manual. Wear
protective gloves if necessary.
•Fuels used in wood or charcoal burning appliances, and the products of combustion of
such fuels, can expose you to chemicals including carbon black, which is known to the
State of California to cause cancer, and carbon monoxide, which is known to the State of
California to cause birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Pre-Assembly:
TOOLS REQUIRED ( Not Included )
FIRE PIT PARTS LIST
No. PARTS Qty
A
Handle
1
B
Mesh wire cover
1
C
Fire Bowl
1
D
Legs
4
E
Poker
1
HARDWARE LIST
No. Hardware Qty
AA
M6 x10 mm Bolt
8
BB
M6 Nut
1

Step By Step Assembly Instructions:
Step1: Insert handle (A) into hole in Mesh wire cover (B) and tighten it with M6 Nut (BB)
underside to secure
Step 2: Attach the legs (D) to the fire bowl (C) by using M6 x 10 mm bolts (AA), then tighten the
bolts.
A
BB
B

Step 3: Put the mesh wire cover (B) on the fire bowl (C) and place the poker (E) near the fire pit
for use anytime.