Philips HF3520 series User manual

HF3520

3
IMPORTANT SAFETY
INSTRUCTIONS
WARNING –To reduce the risk of FIRE, ELECTRIC SHOCK, OR INJURYTO PERSONS:
1. Never use the appliance if the lamp housing is damaged, broken or missing.
2. Heed all warnings.
3. Do not look directly at lighted lamp.
4. If the appliance, power supply cord or cord has been damaged in any way, liquid has spilled or
objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does
not operate normally or has been dropped or damaged, it should not be operated.
5. Read this user manual carefully before you use the appliance and save it for future reference.
6. Water and electricity are a dangerous combination. Do not use this appliance in wet
surroundings (e.g. in the bathroom or near a shower or swimming pool).
7. Make sure the adapter does not get wet.
8. Do not let water run into the appliance or spill water onto the appliance.
9. Do not immerse the appliance in water or rinse under the tap.
10. The adapter contains a transformer. Do not cut off the adapter to replace it with another plug,
as this causes a hazardous situation.
11. Only use the original adapter. If the adapter or any of the other accessories is damaged, do not
use. Call 1-866-832-4361 for assistance.
12. Do not use the adapter in or near a power outlet that contains an electric air freshener to
prevent damage to the adapter.
13. This appliance is for indoor use only.
14. Make sure the vents on the appliance remain open during use.
15. Protect the power cord from being walked on or pinched, particularly at plugs, outlet and point
where they exit from lamp.
16. The appliance has no on/off switch. To disconnect the appliance from the power source, remove
the plug from the wall outlet.
SAVETHESE INSTRUCTIONS

4
General / Allgemeines
What’s in the box
6
Important information
Introduction
Icon explanation
9
Overview
10
First use Erste Anwendung
Setting the clock time
11
Menu
Wake-up prole
12
Wake-up sound
13
Clock time
14
Display contrast
15
Buttons /Tasten
Lamp on/off button
die Lampe
16
FM
Radio on/off button
17
Alarm on/off button
18
Snooze
19
Fall-asleep
20
Extra options
Dawn duration time
21
Demonstration mode
22
7
9

5
Storage
23
23
23
24
24
25
Disposal
Assistance
90-Day Money-Back Guarantee
Full Two-Year Warranty
Troubleshooting

6
What’s in the box

7
Important information
Warning
– Check if the voltage indicated on the adapter corresponds to the local voltage before you
connect the appliance.
– This adapter transforms 100-240 volts to a safe, low voltage of less than 24 volts.
– The appliance is suitable for a voltage of 120 Vac and a frequency of 50/60 Hz.
– Close supervision is necessary when this appliance is used by, or near children or invalids.
– Children should be supervised to ensure that they do not play with the appliance.
Caution
– Do not drop the appliance on the oor, hit it hard or expose it to other heavy shocks.
– Place the appliance on a stable, level and non-slippery surface.
– Do not use the appliance at room temperatures lower than 50°F/ 10°C or higher than
95°F/35°C.
– Consult your doctor before you start using the appliance if you have suffered from or are
suffering from serious depression.
– Do not use this appliance as a means to reduce your hours of sleep.The purpose of this
appliance is to help you wake up more easily. It does not diminish your need for sleep.
– This appliance is only intended for household use, including similar use in hotels. Do not use
attachments not recommended by Philips North America LLC.
General
– This appliance allows you to choose the light intensity level you want to wake up to.
– If you often wake up too early or with a headache, reduce the light intensity level and/or the
sunrise simulation time.
– If you share a bedroom with someone else, this person may unintentionally wake up from the
light of the appliance, even though this person is further removed from the appliance.This is the
result of differences in light sensitivity between people.
– The power consumption of the appliance is lowest if the radio and the lamp are turned off.

8
FCC Information
– This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
– This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
– This Class B digital apparatus complies with Canadian ICES-005.

9
Congratulations on your purchase and welcome to Philips! To fully benet from the support that
Philips offers, register your product at www.philips.com/welcome.
The Philips Wake-up Light helps you wake up more pleasantly. In the set sunrise simulation time
(default is 30 minutes), the light intensity of the lamp gradually increases to the set level and the light
color changes from deep morning red to bright daylight.The light gently prepares your body for
waking up at the set time.To make waking up an even more pleasant experience, you can use natural
wake-up sounds or the FM radio to wake up to.
The effects of the Wake-up Light
The Philips Wake-up Light gently prepares your body for waking up during the last 20 to 40 minutes
of sleep, depending on the sunrise simulation time you set. In the early morning hours our eyes are
more sensitive to light than when we are awake. During that period the relatively low light levels
of a simulated natural sunrise prepare our body for waking up and getting alert. People who use
the Wake-up Light wake up more easily, have a better overall mood in the morning and feel more
energetic. Because the sensitivity to light differs per person, you can set the light intensity of your
Wake-up Light to a level that matches your light sensitivity for an optimal start of the day.
For more information about the Wake-up Light, see www.philips.com.
Introduction
Wake-up prole FM FM radio
Wake-up sound Fall-asleep
Clock time Natural sounds
Display contrast Radio
Lamp Dawn duration
Icon explanation

10
FM
Display
Menu-buttons - press to activate
Press the MENU button
to enter the menu
Press the + or – button
to select a menu setting
Press SELECT to confirm
Note:
To exit the menu, either press the MENU button or wait for 30 seconds.
Navigating through the menu
1 2 3
Overview

11
23
45
1
First use - setting the clock time
You have to set the clock time when you plug in the appliance for the rst time and when there has
been a power failure.
16-20in/
40-50cm First use - placing the Wake-up light
Place the Wake-up Light 16-20in/40-50cm from your head, for example on a bedside table.

12
Setting your wake-up prole
When you set your wake-up prole, you set the wake-up time (steps 1 – 6), the light intensity
(steps 7 and 8) and the sound level (steps 9 and 10) you want to wake up to.You can set two
different wake-up times, for example if you want to wake up at a different time in the weekend
than on weekdays. The procedure to set the wake-up prole and wake-up sound is the same for both.
67
OFF 20
8
9
OFF 20
10
34
2
1
5

13
23
6
6
4
4
1
5
5
Setting your wake-up sound
You can use natural wake-up sounds or the FM radio as a wake-up sound. The Wake-up Light has ve
built-in natural sounds.

14
1
Adjusting the clock time
678
3
12H / 24H
4
2
5
To set the clock time, choose between a 12-hour and a 24-hour clock and then adjust the time.

15
4
3
04
12
Setting the display contrast
You can adjust the display contrast from level 0 (off) to level 4.We advise you to set the display
contrast in a dark bedroom. Choose a contrast level that is optimal for you to see the display at
night.The display contrast will increase to a higher level when the Wake-up light measures a lot of
light in the bedroom.This happens automatically, so you will always be able to see the display, even
when the surroundings are lighter.
Note: If you choose level 0 (display off), you can see the display again by touching it.

16
Switching the lamp on/off
13
120
2
Press the lamp on/off button to switch on the lamp and use it as a bedside lamp.You can adjust the light
intensity by pressing the + and – buttons.To switch off the lamp, press the lamp on/off button again.

17
FM Switching the FM radio on/off
Press the FM on/off button to switch on the FM radio.
120
4
FM / USB FM / USB
12FM
1X
Note:
To scan radio frequencies automatically, press and hold the menu - or + button for approx.
2 seconds.
3

18
Switching the alarm on/off
Press alarm 1 or alarm 2 if you want to switch the alarm on or off.The corresponding icon appears
on the display when you switch on the alarm. It disappears when you switch off the alarm.When you
switch on the alarm, the hour indication starts to ash. If necessary, you can now adjust the alarm time.
12
5
3
4
Note:
If you want to adjust the light level or volume to wake up to, you have to use the menu.
See chapter ‘Setting your wake-up prole’.

19
9 min.
1
Note:
The alarm 1 or alarm 2 icon ashes on the display when the alarm is snoozed.
Snooze
When the alarm sound is played at the set time, you can tap on the front of theWake-up Light to
snooze for a while.The lamp stays on, but the alarm sound stops.After 9 minutes, the alarm sound
is automatically played again. Do not hit the Wake-up Light with too much force, as this may cause
damage.

20
2
560 min
3
1
Fall-asleep
To use the fall-asleep function you need to select a timer.
1. Press the fall-asleep button to switch on the fall-asleep function. The fall-asleep time ashes on
the display for a few seconds.
2. Press the + or – button to adjust the time (5 to 60 minutes). Press the ‘SELECT’ button to
conrm the timer setting.
Note: You can listen to the FM radio during the fall-asleep function.Turn on the radio and select your
favorite station.Then press the fall-asleep button to activate the fall-asleep function.The sound of the
radio will gradually fade during the set fall-asleep time. If you turn on the radio after activating the
fall-asleep function, the sound does not fade when the light dims.The sound will stop when the light
goes out.
To switch off the fall-asleep function, press the fall-asleep button again.The fall-asleep icon disappears
from the display.
Note:
If you press the fall-asleep button without setting the time, the lamp goes on and then dims gradually
over 30 minutes.