Philips PAR20 User manual

Philips Halogen PAR20
Electronic Lamps
Ideal for accent lighting
in retail, hospitality and
commercial buildings
ENERGY SAVING
Energy savings in a small reflector
Philips Halogen PAR20 Electronic Lamp. Replace your
50W halogen PAR20 with the new energy saving 20W
PAR20 electronic to enjoy 30W in energy savings and
up to twice the life*.
Energy savings
• Provides 30W savings and up to twice the life compared to
a standard 50W halogen PAR20 lamp*
5000 hours rated average life1
Available in 25˚ flood and 10˚ spot
Excellent quality of light
• Efficient low-voltage halogen burner
• Philips designed optics for optimal accent light
Consists of a low voltage halogen burner and integrated
transformer in a PAR20 envelope
* Based on a standard 50W halogen PAR20 with a rated average life of 2500 hours vs. a
Philips 20W halogen PAR20 electronic with a rated average life of 5000 hours.
1) See ack page for footnote.
P-5888-B Hal PAR20 Elec Prod Bulletin. xd:Layout 1 11/17/08 11:03 AM Page 1

Philips Halogen PAR20 Electronic Lamps
Ordering, Electrical and Technical Data
Rated
Product Ordering Pack. Bulb Avg. Life Approx. CCT MOL
Number Code Watts Volts Qty. Description Type Base (Hrs.)1MBCP2CRI (K) (In.)
15216-5 PAR20E/FL25 20 120 12 Flood 25˚ PAR20 Medium 5000 1200 100 2900 35⁄16
40494-7 PAR20E/SP10 20 120 12 Spot 10˚ PAR20 Medium 5000 6500 100 2900 35⁄16
© 2008 Philips Lighting Company. All rights reserved.
Printed in USA 11/08
P-5888-B
www. philips.com
Philips Lighting Company
200 Franklin Square Drive
P.O. Box 6800
Somerset, N 08875-6800
1-800-555-0050
A Division of Philips Electronics North America Corporation
Philips Lighting
281 Hillmount Road
Markham, Ontario
Canada L6C 2S3
1-800-555-0050
A Division of Philips Electronics Ltd.
Printed on chlorine free paper from Sappi Fine Paper mills, who are accredited with EMAS environmental certification.
Sappi claims that the pulp used in the manufacture of Magno Dull paper is derived from environmentally certified forests.
hipping Data
Outer Case Case KUs
Product KU UPC Bar Code Case Weight Cube Pallet Per Layers KU Dimensions Case Dimensions Pallet Dimensions
Number (0-46677) (5-00-46677) Qty. (lbs.) (cu. ft.) Qty. Layer High (W x D x H)(In.) (W x D x H)(In.) (W x D x H)(In.)
15216-5 15216-1 15216-6 12 4.1 0.32 1080 180 10 2.36 x 2.36 x 3.74 9.84 x 12.44 x 4.57 47.17 x 39.37 x 33.31
40494-7 40494-9 40494-4 12 4.1 0.32 1080 180 10 2.36 x 2.36 x 3.74 9.84 x 12.44 x 4.57 47.17 x 39.37 x 33.31
This energy saving example shows an application of
100 lamps in a space currently using standard 50W
PAR20 lamps, operating 3,000 hours per year at a cost
of $.10 per kWh.
As you can see, replacing 100 standard halogen 50W PAR
20 lamps with the Philips halogen PAR20 electronic lamps
(with similar candlepower) can provide significant energy
cost savings of possibly $900 per year! Potential savings
from the reduction in HVAC costs as a result of using a
lower wattage lamp that emits less heat is an additional
benefit that was not included in this example.
50W replace
with 20W 30W $9.00 enjoy
up to 2x
Standard Halogen
PAR20
Halogen PAR20 Electronic
PAR20 Electronic Energy Savings Energy Savings
in dollars*
Increased
Lifetime
*Savings ased on $.10 kWh at 3000 operating hours annually compared to lamps with similar light output.
results
in
save
Estimated Lighting Costs Using a tandard 50W Halogen PAR20
Present Wattage 50W
x Annual operating hours 3,000
= 150,000 watts per year
÷ 1,000 = 150 kWh per year
x kWh rate of $.10 = $15 per year
x 100 lamps per space = $1,500
annual energy cost per space
Lighting Costs Using the Philips 20W Halogen PAR20 Electronic
Wattage 20W
x Annual operating hours 3,000
= 60,000 watts per year
÷ 1,000 = 60 kWh per year
x kWh rate of $.10 = $6 per year
x 100 lamps per space = $600
annual energy cost per space
Total Estimated Annual avings = $900
Based on 100 lamps per space operating 3,000 hours per year
Upgrade your lighting using the PAR20 Electronic
Energy saving example
1) Rated average life is the length of operation (in hours) at which point an average of 50% of the lamps will
still e operational and 50% will not.
2) Maximum Beam Candlepower
To avoid deterioration of lampholder y heat, use only heat resistant lampholders or fixtures listed y a
nationally recognized electrical testing organization for use with reflector or PAR lamps.
NOTICE: Before using ul , see operating instructions on inside flap. Adherence to the operating instructions
will reduce the risk of personal injury or fire.
CAUTION: The filament capsule contained inside this glass ul is pressurized, operates at high temperature
and could unexpectedly shatter. Should the outer ul reak, particles of extremely hot glass could e discharged
into the fixture and/or the surrounding environment, there y creating a risk of personal injury or fire.
OPERATING INSTRUCTIONS: Before replacing, turn off power and let lamp cool to avoid electrical
shock or urn.
— For indoor or outdoor use. A weather-protected fixture is recommended for wet locations.
— Suita le for use in open fixtures.
— Do not exceed the maximum wattage rating of the fixture.
— Do not use if outer glass is scratched or roken since it may reak during operation or removal.
— If outer glass reaks the lamp may continue to light, however, immediately discontinue use.
— Due to the heat that radiates from the ul , do not use in close proximity to com usti le materials
or o jects suscepti le to drying or fading.
— Manage in accord with disposal laws.
—MAXIMUM ALLOWABLE TEMPERATURE: To prevent over heating of the electronic circuit inside,
the case temperature,T
cmust not exceed 100˚C.
Above specifications subject to change without notice.
P-5888-B Hal PAR20 Elec Prod Bulletin. xd:Layout 1 11/17/08 11:03 AM Page 2