Philips CEM1000/00 User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
ES Manual del usuario
PT-BR Manual do Usuário
ZH-TWԚʹ˫
ZH-CNႬ߀൱Ҭ
CEM1000
&(0BB80B9LQGE6HF 

3
English
EN
Contents
1 Important 4
Safety 4
Notice 4
2 Your car audio system 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 8
3 Get started 10
Install the car audio 10
Install remote control battery 14
Turn on 14
Set clock 14
4 Listen to radio 15
Tune to a radio station 15
Store radio stations in memory 15
Store stations manually 15
Tune to a preset station 15
5 Play with RDS 16
Turn on RDS 16
Select program type 16
Select alternate frequencies 16
Receive trafc announcement 17
Set RDS clock 17
6 Play audio les 18
Play a disc 18
Search for an MP3/WMA track 18
View play information 18
Repeat play 19
Shufe play 19
Intro play 19
Connect external sound source 19
7 Adjust sound 20
Adjust volume 20
Mute 20
Turn Dynamic Bass Boost (DBB) on/off 20
Select preset equalizer 20
Other sound settings 20
8 Adjust system settings 21
Select anti-shock setting 21
Turn beep sound on/off 21
Select blackout setting 21
Turn demo mode on/off 21
Reset 22
9 Additional information 23
Detach the front panel 23
Replace fuse 23
Remove the unit 23
10 Product information 24
11 Troubleshooting 25
12 Glossary 26
&(0BB80B9LQGE6HF 

4
Notice
The making of unauthorized copies of
copy-protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
This apparatus includes this label:
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
1 Important
Safety
Read and understand all instructions•
before you use your apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
This apparatus is designed for negative•
ground (earth) 12 V DC operation only.
To ensure safe driving, adjust the volume•
to a safe and comfortable level.
Improper fuses can cause damage or•
re. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware•
for a safe and secure installation.
To avoid short circuit, do not expose the•
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation•
slots or other openings on the apparatus.
Clean the apparatus and frame with a•
soft, damp cloth. Never use substances
such as alcohol, chemicals or household
cleaners on the apparatus.
Never place any objects other than discs•
into the apparatus.
Never use solvents such as benzene,•
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Visible and invisible laser radiation when•
open. Avoid exposure to beam.
Risk of damage to the apparatus screen!•
Never touch, push, rub or strike the
screen with any object.
Caution
Use of controls or adjustments or• performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
EN
&(0BB80B9LQGE6HF 

5
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
This product complies with the radio
interference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Any changes or modications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
English
EN
&(0BB80B9LQGE6HF 

6
a
f
dec
b
lki
j
h
g
2 Your car audio
system
Congratulations on your purchase, and
welcome to Philips!To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the in-car audio system, you can enjoy
your drive while listening to:
FM or AM (MW) radio•
Audio from CD or MP3 disc•
Audio from external devices•
What’s in the box
Check and identify the contents of your
package:
a Main unit
b Remote control
c Front panel
d Trim plate
e Carrying case for front panel
f Sleeve
g Rubber cushion
h Screws x 4 pcs
i Standard ISO connector
j Disassembly tools x 2 pcs
k User manual
lQuick start guide
EN
&(0BB80B9LQGE6HF 

7
d /OK/MUTE
Turn the unit on or off.•
Conrm selection.•
Mute or unmute sound.•
Rotate to adjust volume.•
e
Return to previous menu.•
f
Eject disc.•
Overview of the main unit
a DBB
Turn on or off Dynamic Bass Boost•
(DBB) sound.
b
Unlock the panel.•
c /
Select tuner band.•
Select MP3/WMA folder.•
Scroll up/down menu.•
lk
mn g
i
f
ba e
d
c
po
jh
English
EN
&(0BB80B9LQGE6HF 

8
Overview of the remote
control
a +/PRESET/-/RRESET
Select preset radio station.•
b OPT
Access option menu.•
c
Start play.•
Pause or resume play.•
d AUDIO
Access audio setting menu.•
e /
Tune to a radio station•
Skip track.•
Fast backward/forward playback•
f OK
Conrm selection.•
g MENU
Access system menu.•
OPTIONS CLOCK
OK
PRESET
OP T
FOLDER SONG
PRESET
DISPLAY
h
g
d
e
f
c
b
a
n
o
p
q
r
l
m
k
j
i
g MP3 LINK
Connect external audio device.•
h +SONG/FOLDER -
Select preset radio station.•
Search for track/folder.•
i OPTIONS/CLOCK
Access option menu.•
View clock.•
j /
Tune for radio station.•
Skip/search for track.•
Fast backward/forward playback.•
k DISP
Display current status.•
l MENU
Access system menu.•
m EQ AUDIO
Select equalizer (EQ) setting.•
Access audio setting menu.•
n SOURCE
Select audio source.•
o RESET
Restore default settings•
p Disc slot
EN
&(0BB80B9LQGE6HF 

9
h /PWR/
Turn the unit on or off.•
Mute or restore volume.•
i /
Select tuner band.•
Scroll up/down menu.•
Select MP3/WMA folder.•
j
Return to previous menu.•
k SOURCE
Select audio source.•
l VOLUME +/-
Adjust volume.•
m EQ
Select equalizer (EQ) settings.•
n DBB
Turn on or off Dynamic Bass Boost•
(DBB) sound.
o SONG
Search for track.•
p FOLDER
Search for folder.•
q DISP
Display current status.•
r CLOCK
View clock.•
English
EN
&(0BB80B9LQGE6HF 

10
Note on the power supply lead (yellow)
When you connect other devices to this•
apparatus, ensure that the rating of the
car circuit is higher than the total fuse
value of all the connected devices.
Notes on speaker connection
Never connect speaker wires to the•
metal body or chassis of the car.
Never connect speaker wires with stripes•
to one another.
Select country/region
Note
Select correct country/region for this unit,• otherwise the unit can not work properly.
1 Press to turn on the unit.
»[SELECT OPERATING REGION] is
displayed.
2 Rotate to select an option:
[USA] (United States)•
[Latin] (Latin America)•
[Europe] (Western Europe)•
[ASIA] (Asia Pacic)•
[Mid-East ] (Middle East)•
[Russia] (Russia)•
3 Press to conrm.
Connection: for cars with ISO
connectors
Caution
Ensure that all loose leads are insulated with• electrical tape.
1 Pull out the ISO connectors from car
dashboard and connect them to the
bigger end of the supplied standard
connector.
3 Get started
Caution
Use the controls only as stated in this user• manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus.The
model number and serial number are on the
bottom of your apparatus.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
This unit is designed for negative ground• (earth) 12 V DC operation only.
Always install this unit in the car dashboard.• Other locations can be dangerous as the rear
of the unit heats up during use.
To avoid short-circuit: before you connect,• ensure that the ignition is off.
Ensure that you connect the yellow and red• power supply leads after all other leads are
connected.
Ensure that all loose leads are insulated with• electrical tape.
Ensure that the leads do not get caught under• screws orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to• a common ground (earth) point.
Use only the supplied mounting hardware for a• safe and secure installation.
Improper fuses can cause damage or re.
• When you need to change the fuse, consult a
professional.
EN
&(0BB80B9LQGE6HF 

11
Connection: for cars without ISO
connectors
Caution
Be sure to connect the black ground (earth)• lead rst.
1 Connect the antenna and amplier as
illustrated, if applicable.
Connector Connect to
1ANTENNA Antenna
2REAR LINE
OUT R
Rear right
speaker
3REAR LINE
OUT L
Rear left speaker
2 Cut off the bigger end of the supplied
standard connector.
b
a
c
d
aa
bcd
ab
ef
cd
gh
b
c
d
2 Connect the other end of the supplied
standard connector to the unit.
3 Connect the antenna and amplier as
illustrated, if applicable. You can connect
the car audio to the amplier through
RCA-TO-RCA cables (not supplied).
Connector Connect to
1ANTENNA Antenna
2REAR LINE
OUT R
Rear right
speaker
3REAR LINE
OUT L
Rear left speaker
English
EN
&(0BB80B9LQGE6HF 

12
Mount into the dashboard
1 If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
If you disconnect the car battery in•
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
If the car battery is not disconnected,•
to avoid short-circuit, ensure that the
bare wires do not touch each other.
2 Ensure that car dashboard opening is
within these measurements:
183 mm
53mm
5mm
3 Remove the two screws on the top of the
unit.
4 Remove the mounting sleeve with the
supplied disassembly tools.
3 Check the car’s wiring carefully, then
connect them to the supplied standard
connector.
1Green/black strip Left speaker
(Rear)
2White/black strip Left speaker
(Front)
3Gray/black strip Right speaker
(Front)
4Purple/black strip Right speaker
(Rear)
eRED Ignition key +12V DC
when ON/ACC
fBLUE Motor/electric antenna
relay control lead/
Amplier relay control
lead
gBLACK Ground
hYELLOW To the +12V car battery
which is energized at all
times
4 Connect the supplied standard connector
to the unit.
Tip
The pin arrangement for the ISO connectors• depends on the type of vehicle you drive. Be
sure to make proper connections to prevent
damage to the unit.
EN
&(0BB80B9LQGE6HF 

13
7 Slide the unit into the dashboard until you
hear a click sound.
8 Reconnect the negative terminal of the
car battery.
5mm
5 Install the sleeve into the dashboard and
bend the tabs outward to x the sleeve.
Note
If the unit is not xed by sleeve but by the• supplied screws, skip this step.
6 Place the supplied rubber cushion over
the end of the mounting bolt.
5mm5mm5mm5mm
English
EN
&(0BB80B9LQGE6HF 

14
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Turn on
1 Press to turn on the unit.
To turn off the unit, press• for over
3 seconds.
Set clock
1 Press MENU.
2 Press or repeatedly until current
time is displayed.
3 Rotate clockwise to set hour.
4 Press to conrm.
5 Rotate anti-clockwise to set minute.
6 Press to conrm.
View clock
1 Press and hold OPTIONS repeatedly
until the clock is displayed.
Attach the front panel
1 Attach the trim plate.
2 Insert the right side of the panel in the
chassis until it is correctly engaged.
3 Press the left side of the panel until the
mechanism locks it into place.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from• heat, sunshine or re. Never discard batteries
in re.
Risk of decreased battery life! Never mix
• different brands or types of batteries.
Risk of product damage! When the remote• control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may• apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
For rst-time use:
1 Remove the protective tab to activate the
remote control battery.
EN
&(0BB80B9LQGE6HF 

15
Store radio stations in
memory
You can store up to 6 stations in each band.
Store stations automatically
1 Press OPTIONS repeatedly until AUTO-
SCAN is displayed, then press to
conrm.
The six strongest stations of the»
selected band are saved in preset
channel automatically: FM1, FM2, FM3
1-6,AM1, AM2.
Store stations manually
1 Tune to a station that you want to store.
(see ‘Tune to a radio station’ )
2 Press and hold +/PRESET or -/RRESET to
enter storing mode.
The preset number on LCD screen»
blinks.
3 Press +/PRESET or -/RRESET to select
storing location.
4 Press to conrm.
The station is saved in the selected»
channel.
The preset number on LCD screen»
lights up and remains on.
Tune to a preset station
1 Press or to select band.
2 Press +/PRESET or -/RRESET to select
the preset station.
4 Listen to radio
Tune to a radio station
1 Press SOURCE repeatedly to select
Tuner.
2 Press or to select band: [FM1],
[FM2], [FM3], [AM1], or [AM2] .
3 Press or to tune to a radio station
manually.
The radio station is broadcast.»
To search for a radio station»
automatically, press or for over
3 seconds.
Select tuner region
You can select suitable country/region of the
radio.
1 Press SOURCE to select radio mode.
2 Press MENU repeatedly to select region.
3 Rotate to select:
[• Europe] (Western Europe)
[• USA] (United States)
[• LATIN] (Latin America)
[• OIRT] (Russia)
Select tuner sensitivity
To receive more radio stations or only
stations with strong signal, you can adjust the
tuner sensitivity.
1 Press OPTIONS repeatedly until
[LOCAL] or [DX] is displayed.
2 Rotate to select a setting:
[• LOCAL SEEK ON]: Only stations
with strong signal can be broadcast.
[• LOCAL SEEK OFF]: Stations with
strong and weak signals can be
broadcast.
English
EN
&(0BB80B9LQGE6HF 

16
6DRAMA Radio plays and
literature
7CULTURE Culture, religion
and society
8SCIENCE Science
9VARIED Entertainment
programs
10 POP M Pop music
11 ROCK M Rock music
12 EASY M Light music
13 LIGHT M Light classical
music
14 CLASSICS Classical music
15 OTHER M Special music
programs
16 WEATHER Weather
17 FINANCE Finance
18 CHILDREN Children’s
programs
19 SOCIAL Social Affairs
20 RELIGION Religion
21 PHONE IN Phone In
22 TRAVEL Travel
23 LEISURE Leisure
24 JAZZ Jazz Music
25 COUNTRY Country Music
26 NATION M National Music
27 OLDIES Oldies Music
28 FOLK M Folk Music
29
DOCUMENT Documentary
30 TEST Alarm Test
31 ALARM Alarm
Select alternate frequencies
If the radio signal is poor, turn on AF (Alternate
Frequency) to search for another station with
stronger signal.
1 Press MENU or OPTIONS.
2 Press or repeatedly until [AF] is
displayed.
5 Play with RDS
The RDS (Radio Data System) function
operates only in areas with FM stations
broadcasting RDS signals. If you tune to an RDS
station, an RDS icon and information about the
presenter, station or program is displayed.
Turn on RDS
Note
The default setting for RDS is off.•
1 Press MENU for 3 seconds.
2 Rotate to select RDS ON:
The RDS function is turned on.»
Select program type
Before tuning to RDS stations, you can select
program type and let the unit search only for
programs of the selected category.
1 Press OPTIONS until [PTY SCH] is
displayed.
2 Turn to select a type, then press to
conrm.
Item Program type Description
1NEWS News services
2AFFAIRS Politics and
current affairs
3INFO Special
information
programs
4SPORT Sports
5EDUCATE Education
and advanced
training
EN
&(0BB80B9LQGE6HF 

17
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1 Press MENU.
2 Press or repeatedly until [CT] is
displayed.
3 Rotate to select a setting:
• [CT ON]: Turn on the RDS clock.
Time shown on the unit synchronizes
with that on the RDS station.
• [CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends• on the RDS station that transmits the time
signal.
3 Rotate to select a setting:
• [AF ON]: Turn on the AF mode.
• [AF OFF]: Turn off the AF mode.
Set region for AF tuning
You can dene AF tuning region:
[REG
ON]
Only stations in current region
can be tuned to automatically.
[REG
OFF]
All stations can be tuned to
automatically.
1 Press MENU.
2 Press or repeatedly until [REG]
(Regional Radio) is displayed.
3 Rotate to select a setting.
Receive trafc announcement
If you do not want to miss trafc
announcement when enjoying music, turn on
theTA (Trafc Announcement) function.
1 Press MENU or OPTIONS.
2 Press or repeatedly until [TA] is
displayed.
3 Rotate to select a setting:
• [TA ON]: When there is trafc
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the trafc conditions.
When the trafc announcement
is over, it returns to the previous
mode.
• [TA OFF]: Trafc announcement
does not cut in.
English
EN
&(0BB80B9LQGE6HF 

18
Search for an MP3/WMA
track
Search within the current folder
1 Press +SONG.
The name of the current track is»
displayed.
2 Turn to select anther track in current
folder
3 Press to conrm.
Search in other folder
1 Press FOLDER -.
The name of the current folder is»
displayed.
2 Rotate to navigate through all folders.
3 Press to access the selected folder.
4 Rotate to select a track in the folder.
5 Press to start play.
Tip
To go back to upper level of a folder, press• .
View play information
1 When playing, press DISP repeatedly to
view:
Track number and elapsed play time•
Artist•
Album•
Title•
Folder•
File•
6 Play audio files
Note
Ensure that the disc or device contains playable• les.
Play a disc
Note
You cannot play CDs encoded with copyright• protection technologies.
You can play commercially available audio CDs
and these discs:
CD-Recordables (CD-R)•
CD-Re-writables (CD-RW)•
MP3 CDs•
WMA CDs•
Note
Ensure that the disc contains playable content.•
1 Insert a CD with the printed side facing
up.
Play starts automatically.»
To pause CD play, press• .
To resume CD play, press• again.
To skip to the previous/next track, press•
or .
To search backward/forward rapidly•
within the current track, press or
for over 3 seconds.
Remove the CD
To take out the CD, press on the front panel.
Tip
If the disc is blocked in the disc compartment,• press and hold until the disc comes out.
EN
&(0BB80B9LQGE6HF 

19
Connect external sound
source
1 Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
2 Press SOURCE repeatedly until [MP3
LINK] is displayed.
3 Operate the external component (refer
to the instructions supplied with the
external component).
Repeat play
1 During play, press OPTIONS repeatedly
until [REP] is displayed.
2 Rotate to select a setting.
• [RPT TRK] (repeat one track): play
current track repeatedly.
• [RPT DIR] (repeat a folder): play all tracks
in the current folder repeatedly.
• [RPT ALL] (repeat all tracks): play all
tracks repeatedly.
Shufe play
You can play the tracks in random order:
1 During play, press OPTIONS repeatedly
until [SHUF] is displayed.
2 Rotate to select a setting:
• [SHUF ON]: start shufe play for all
tracks.
• [SHUF OFF]: cancel shufe play.
Intro play
You can play the rst 10 seconds of each track.
1 During play, press OPTIONS repeatedly
until [INT] is displayed:
2 Rotate to select a setting:
• [INT ON] : After the rst 10
seconds of each track have been
played, play stops.
• [INT OFF] : Cancel intro play and
start normal play.
English
EN
&(0BB80B9LQGE6HF 

20
Other sound settings
You can also adjust the preset EQ/Audio
settings.
1 Press EQ/Audio for over 3 seconds.
2 Press or repeatedly to select the
item to be adjusted:
• [BAS] (bass) range: -7 to +7.
• [TRE] (treble) range: -7 to +7.
• [BAL] (balance) range: 12L to 12R. (L
= left speaker, R = right speaker)
• [FAD] (fader) range: 12R to 12F. (R =
rear speaker, F = front speaker)
3 Rotate to select a value.
7 Adjust sound
Adjust volume
1 Turn clockwise/anticlockwise to
increase/decrease volume.
Mute
You can turn off the sound of your audio.
1 During play, press .
To resume sound, press• again.
Turn Dynamic Bass Boost
(DBB) on/off
1 Press DBB and the current setting is
displayed:
»[DBB ON] :The Dynamic Bass Boost
(DBB) function is on.
»[DBB OFF] :The DBB function is off.
2 Press DBB again to change the DBB
setting.
Select preset equalizer
1 Press EQ/Audio.
Current Equalizer setting is displayed.»
2 Press EQ/Audio again to select a preset
EQ setting:
• [OPTIMAL] (optimal)
• [FLAT] (at)
• [POP] (pop)
• [USER] (user)
• [TECHNO] (techno)
• [ROCK] (rock)
• [CLASSIC] (classic)
• [JAZZ] (jazz)
EN
&(0BB80B9LQGE6HF 

21
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1 Press MENU.
2 Rotate to select a setting:
• [BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
• [BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
• [BKO OFF] : Never turn off the
screen.
3 Press to conrm.
Turn demo mode on/off
1 Press MENU.
2 Press or repeatedly until [DEMO] is
displayed.
The screen shows current Demo»
mode setting.
3 Rotate to select a setting:
• [DEMO ON] : Turn on the demo
mode. When the unit is idle for
more than 10 seconds, all functions
are displayed.
• [DEMO OFF] : Turn off the demo
mode.
8 Adjust system
settings
Select anti-shock setting
You can select anti-shock setting according to
the stability of your car and the condition of the
road.
1 Press MENU.
2 Press or repeatedly until [ESP] is
displayed.
3 Turn to select a setting:
• [ESP 10S]: when the road is smooth
and there are few bumps.
• [ESP 40S]: when the road is bumpy
and unstable.
4 Press to conrm.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1 Press MENU.
2 Press or repeatedly until [BEEP] is
displayed.
3 Rotate to select a setting:
• [BEEP ON]: Turn on the beep
sound.
• [BEEP OFF]: Turn off the beep
sound.
English
EN
&(0BB80B9LQGE6HF 