Philips DC190/12 User manual

Docking Entertainment System
Register your product and get support at
www.philips.com/welcome
DC190
EN User manual 3
DA Brugervejledning 13
DE Benutzerhandbuch 23
ES Manual del usuario 33
FR Mode d’emploi 43
IT Manuale utente 53
NL Gebruiksaanwijzing 63
SV Användarhandbok 73

3
7 Product information 11
6SHFLÀFDWLRQV 11
8 Troubleshooting 12
Contents
1 Important 4
Safety 4
Notice 4
2 Your Docking Entertainment System 5
Introduction 5
What’s in the box 5
Overview of the main unit 6
3 Get started 7
Connect power 7
Set clock 8
Turn on 8
Adjust volume 8
4 Play 8
Play from iPod 8
Play from an external device 9
5 Listen to radio 9
Tune to a radio station 9
Program radio stations automatically 9
Program radio stations manually 10
Select a preset radio station 10
6 Other features 10
Set the alarm timer 10
Set the sleep timer 11
Adjust display brightness 11
English
EN

4
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
nApparatus shall not be exposed to
dripping or splashing.
oDo not place any sources of danger on
WKHDSSDUDWXVHJOLTXLGÀOOHGREMHFWV
lighted candles).
pThis product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
qWhere the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Warning
Never remove the casing of this apparatus.Never lubricate any part of this apparatus.Never place this apparatus on other electricalequipment.
Keep this apparatus away from direct sunlight,
QDNHGÁDPHVRUKHDW
Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect the
apparatus from the power.
Notice
This product complies with the
radio interference requirements
of the European Community.
This product complies with the
requirements of the following directives and
guidelines: 2004/108/EC + 2006/95/EC
$Q\FKDQJHVRUPRGLÀFDWLRQVPDGHWRWKLV
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
1 Important
Safety
Important Safety Instructions
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
hDo not install near any heat sources
such as radiators, heat registers, stoves,
RURWKHUDSSDUDWXVLQFOXGLQJDPSOLÀHUV
that produce heat.
iProtect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
jOnly use attachments/accessories
VSHFLÀHGE\WKHPDQXIDFWXUHU
kUse only with the cart,
stand, tripod, bracket,
RUWDEOHVSHFLÀHGE\WKH
manufacturer or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
lUnplug this apparatus during lightning
storms or when unused for long periods
of time.
m 5HIHUDOOVHUYLFLQJWRTXDOLÀHGVHUYLFH
personnel. Servicing is required when
the apparatus has been damaged in any
EN

5
2 Your Docking
Entertainment
System
Congratulations on your purchase, and
ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURPWKH
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from the
iPod, other audio devices, or the radio.
The radio, iPod, or buzzer can be set as the
alarm timer.You can set two alarm timers to go
off at different times.
What’s in the box
Check and identify the contents of your
package:
Main unit
1 x AC adaptor
1 x MP3 link cable
User manual
Quick start guide
Recycling
Your product is designed and
manufactured with high quality
materials and components, which
can be recycled and reused.
When you see the crossed-out
wheel bin symbol attached to a
product, it means the product
is covered by the European
Directive 2002/96/EC:
Never dispose of your product
with other household waste. Please inform
yourself about the local rules on the separate
collection of electrical and electronic products.
The correct disposal of your old product helps
prevent potentially negative consequences on
the environment and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Norge
7\SHVNLOWÀQQHVSnDSSDUDWHQVXQGHUVLGH
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
IUDNRSOHWQHWWHWVnOHQJHDSSDUDWHWHUWLOVOXWWHW
nettkontakten.
)RUnUHGXVHUHIDUHQIRUEUDQQHOOHUHOHNWULVN
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
English
EN

6
Overview of the main unit
EN

7
pVOL +/-
Adjust volume.
Adjust time.
qSLEEP
Set the sleep timer.
3 Get started
Caution
Use of controls or adjustments orperformance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
bottom of the apparatus.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
Risk of product damage! Ensure that the powervoltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
AC adaptor, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC adaptor, ensure you
have completed all other connections.
Note
The type plate is located on the bottom of themain unit.
1Connect one end of the AC adaptor to
the DC IN socket on the main unit.
aALARM 1/ALARM 2
Set the alarm timer.
View the alarm time.
Turn off the alarm tone.
bREPEAT ALARM/BRIGHTNESS
CONTROL
Repeat the alarm.
Adjust the display brightness.
c
Turn on the unit or switch to
standby mode.
dSOURCE
Select a source: iPod, FM tuner or
MP3 link.
ePRESET +/-
Select a preset radio station.
Adjust time.
fDisplay panel
Show current status.
gDock compartment
h
Start or pause iPod play.
i/
6NLSWRWKHSUHYLRXVQH[WDXGLRÀOH
6HDUFKZLWKLQDQDXGLRÀOH
jTUNING +/-
Tune to a radio station.
Adjust time.
kTIME SET/AUTO SCAN
Set the clock.
Scan radio stations.
lWAKE TO iPod/RADIO/BUZZ
Select alarm mode.
mMP3-LINK
Jack for an external audio device.
nDC IN
Power supply socket.
oiPod dock
Load an iPod player.
English
EN

8
Switch to standby
1Press again to switch the unit to
standby mode.
The clock (if set) appears on the»
display panel.
Adjust volume
1During play, press VOL +/- to increase/
decrease the volume.
4 Play
Play from iPod
You can enjoy audio from iPod through this unit.
Compatible iPod
Apple iPod models with a 30-pin dock
connector:
iPod classic, iPod touch, iPod nano, iPod
5th generation (video), iPod with color
display, iPod mini.
Load the iPod
1Push to open the dock compartment.
2Connect the other end of the AC
adaptor to the wall outlet.
Set clock
1In standby mode, press and hold TIME
SET/AUTO SCAN for 2 seconds.
The hour digits begin to blink.»
2Press TUNING +/- to set the hour.
3Press TIME SET/AUTO SCAN.
The minute digits begin to blink.»
4Press TUNING +/- to set the minute.
5Press TIME SET/AUTO SCAN to
FRQÀUP
The week day digits begin to blink.»
6Press TUNING +/- to set the week day.
7Press TIME SET/AUTO SCAN to
FRQÀUP
Turn on
1Press .
The unit switches to the last selected»
source.
EN

9
3Start to play the device (see the device
user manual).
5 Listen to radio
Note
Only FM radio reception is available on thisunit.
Tune to a radio station
Tip
Position the antenna as far as possible fromTV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
1Press SOURCE repeatedly to select FM
tuner.
2Press and hold TUNING +/- for more
than 2 seconds.
The radio tunes to a station with»
strong reception automatically.
3Repeat step 2 to tune to more stations.
To tune to a weak station, press
TUNING +/- repeatedly until you
ÀQGRSWLPDOUHFHSWLRQ
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1In the tuner mode, press and hold TIME
SET/AUTO SCAN for more than 2
seconds to activate automatic program
mode.
All available stations are programmed»
in the order of waveband reception
strength.
7KHÀUVWSURJUDPPHGUDGLRVWDWLRQLV»
broadcast automatically.
2Place the iPod in the dock.
Remove the iPod
1Pull the iPod out of the dock.
Listen to the iPod
1Ensure that the iPod is loaded correctly.
2Press SOURCE repeatedly to select iPod
source.
The connected iPod plays automatically.»
To pause/resume play, press .
To skip to a track, press / .
To search during play, press and
hold / , then release to resume
normal play.
Charge the iPod
When the unit is connected to power, the
docked iPod begins to charge.
Play from an external device
You can also listen to an external audio device
through this unit.
1Press SOURCE repeatedly to select MP3
link source.
2Connect the supplied MP3 link cable to:
the MP3-LINK jack (3.5mm) on the
back of the unit.
the headphone jack on an external
device.
English
EN

10
5Repeat steps 3-4 to set the minute.
6Repeat steps 3-4 to select whether to
ring alarm on weekdays or at weekend.
“L XX(volume level)” begins to blink.»
7Repeat steps 3-4 to set the maximum
alarm volume.
Set alarm mode
1Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
When the alarm time comes, the»
selected iPod, radio or buzzer turns on.
Tip
If iPod source is selected but no iPod is loaded,the buzzer is selected automatically.
Activate and deactivate the alarm
timer
1Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
If the timer is activated,»or is
displayed.
To deactivate the alarm timer, press
ALARM 1 or ALARM 2 repeatedly
until is displayed.
If the timer is deactivated,»or
disappears.
Repeat alarm
1When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL.
The alarm repeats ringing minutes later.»
Tip
You can pressTUNING+/- to adjust interval
to repeat alarm.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1Tune to a radio station.
2Press TIME SET/AUTO SCAN to activate
the program mode.
The preset number begins to blink.»
3Press PRESET +/- to select a number.
4Press TIME SET/AUTO SCAN to
FRQÀUP
5Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, storeanother station in its place.
Select a preset radio station
1Press PRESET +/- to select a preset
number.
6 Other features
Set the alarm timer
You can set two alarms which go off at different
time.
1Ensure that you have set the clock
correctly.
2Press and hold ALARM 1 or ALARM 2
for 2 seconds.
»or and hour digits begin to
blink.
3Press TUNING +/- repeatedly to set the
hour.
4Press ALARM 1 or ALARM 2WRFRQÀUP
»or and minute digits begin
to blink.
EN

11
7 Product
information
Note
Product information is subject to changewithout prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Rated Output Power 2X1.5 W RMS
Signal to Noise Ratio >55 dB
MP3 Link 0.6 V RMS 10 kohm
Tuner
FM
Tuning Range 87.5 - 108 MHz
Tuning grid 50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBu
<45 dBu
Search Selectivity <28 dBu
Total Harmonic Distortion <3%
Signal to Noise Ratio >45 dB
Stop alarm ring
1When the alarm rings, press the
corresponding ALARM 1 or ALARM 2.
The alarm stops but the alarm settings»
remain.
View the alarm settings
1Press ALARM 1 or ALARM 2.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1Press SLEEP repeatedly to select a set
period of time (in minutes).
When the sleep timer is activated, the»
display shows .
To deactivate sleep timer
1Press SLEEP repeatedly until [OFF] (off)
is displayed.
When the sleep timer is deactivated,»
disappears on the display.
Note
When the sleep timer is activated, the volume
will gradually decrease.
Adjust display brightness
1Press BRIGHTNESS CONTROL
repeatedly to select different levels of
display brightness.
English
EN

12
Poor radio reception
Increase the distance between the unit
and your TV or VCR.
Fully extend the FM antenna.
Timer does not work
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
Power has been interrupted or the power
plug has been disconnected.
Reset the clock/timer.
General information
AC power (power
adaptor)
Input: 100-240V~,
50/60Hz, 0.4A; Output:
6.5V 1.3A; Brand
name: Philips; Model
No.: AS090-065-AB130
Operation Power
Consumption
<5W
Standby Power
Consumption
<2W
Dimensions
- Main Unit
(W x H x D)
144 x 144 x 62 mm
Weight
- Main Unit 0.44 kg
8 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power plug of the
unit is connected properly.
Ensure that there is power at the AC
outlet.
No sound
Adjust the volume.
No response from the unit
Disconnect and reconnect the AC power
plug, then turn on the unit again.
EN

© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
DC190_12_UM_V2.1