Philips DCB210/05 User manual

1
Quick start guide
EN
2
Connect
Setup
Enjoy
3
Register your product and get support at
www.philips.com/welcome DCB210
Docking Entertainment System

What’s in the box
Quick Start Guide
Quick Start Guide
User Manual
User Manual
Main unit Power adaptor MP3 link cable
1Connect
Prepare DAB/FM antenna
AConnect power B
1Connect the power adaptor to
the•DC IN jack on the rear
of the main unit
the power socket.•
1Fully extend the antenna and
x it to the wall as shown.
MP3-Link DC IN
TUNING –TUNING +
INFO /
MENU
TIME SET /
AUTO SCAN
BUZZ
FMDAB
WAKE TO iPod
6.5V1.3A

Setup
2
1In standby mode, press and hold TIME
SET/AUTO SCAN for 2 seconds.
» [SYNC ON] begins to blink.
2Press TUNING +/- or PRESET +/- to
select a sync mode and press TIME SET/
AUTO SCAN to conrm.
» The 24H or 12H begins to blink.
3Press TUNING +/- to select the clock
format .
» The hour digits begin to blink.
4Press TUNING +/- to set the hour.
5Press TIME SET/AUTO SCAN.
» The minute digits begin to blink.
6Press TUNING +/- to set the minute.
7Press TIME SET/AUTO SCAN to
conrm.
8Press TUNING +/- to set the year,
month, and date.
9Press TIME SET/AUTO SCAN to
conrm.
Set clock
ASet the alarm timer
B
1Ensure that you have set the clock
correctly.
2Press and hold ALARM 1 or ALARM 2
for 2 seconds.
» The hour digits begin to blink.
3Press TUNING +/- to set the hour.
4Press ALARM 1 or ALARM 2 again.
» The minute digits begin to blink.
5Press TUNING +/- to set the minute.
6Press ALARM 1 or ALARM 2 to
conrm.
» The weekdays begin to blink.
7Press TUNING +/- to select whether to
ring alarm on weekdays or weekend.
8Press ALARM 1 or ALARM 2 to
conrm.
9Press TUNING +/- to select alarm
volume.
10 Press ALARM 1 or ALARM 2 to
conrm.

Setup
2
Set alarm mode
1Adjust the WAKE TO iPod/DAB/FM/
BUZZ control to select the source for
the alarm.
» When the alarm time comes, the
selected iPod, DAB, FM radio or buzzer
turns on.
Activate and deactivate the alarm timer
1Press ALARM 1 or ALARM 2 repeatedly
to activate/deactivate the timer.
E Tip
If the alarm timer is turned on,•AL1/
AL2 is displayed.
If the alarm timer is turned off,•
disappears.
Repeat alarm
1When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL.
» The alarm repeats ringing minutes later.
E Tip
You can press•TUNING+/- to adjust
interval (5 - 15 minutes) to repeat alarm.
Stop alarm ring
1When the alarm rings, press the
corresponding ALARM 1 or ALARM 2.
» The alarm stops but the alarm settings
remain.
MP3-Link DC IN
TUNING –TUNING +
INFO /
MENU
TIME SET /
AUTO SCAN
BUZZ
FMDAB
WAKE TO iPod
6.5V1.3A
BUZZ
FMDAB
WAKE TO iPod
Reset the preset radio stations
1In FM/DAB mode, during broadcasting,
press and hold INFO/MENU.
[SELECT FACTORY]
»is displayed
on the screen.
2Press SELECT.
[CONFIRM Reset]
»is displayed on
the screen.
3Press SELECT to conrm.
All preset radio stations are cleared.
»

1Press SOURCE repeatedly to select
DAB/FM radio
2In the DAB/FM tuner mode, press and hold
TIME SET/AUTO SCAN for more
than 2 seconds to activate automatic
program mode.
» All available stations are programmed
in the order of waveband reception
strength.
» The rst programmed radio station is
broadcast automatically.
2Press PRESET +/- to select a preset
number.
3Press and hold SELECT for two seconds.
» The preset number of the saved station
appears.
E Tip
Detailed functions and features are•
described in the user manual.
Program and listen to DAB/FM
radio stations
APlay from iPod B
1Push to open the dock compartment.
2Place the iPod in the dock.
3Press SOURCE repeatedly to select iPod
source.
» The connected iPod plays automatically.
To pause/resume play, press•.
To skip to a track, press•/ .
To search during play, press and hold•
/ , then release to resume normal
play.
Enjoy
2
3

© Royal Philips Electronics N.V. 2009
All rights reserved.
Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China
DCB210_05_QSG_V2.0