Philips DCD778/37 User manual

Docking Entertainment System DCD778
DVD Kitchen Radio
with dock for iPod
Quick Start Guide
Preparation
Connect it
Mount it
Use it
This Guide shows you:
•basic installation setup
•how to install your unit
•how to play a DVD
•how you can watch TV on
the unit
For detailed operation of all the features, please also read the
User manual.
4
3
2
1
What’s in the box
CR2025
Docking Entertainment System DCD778
DVD Kitchen Radio
with dock for iPod
Quick Start Guide
Preparation
Connect it
Mount it
Use it
This Guide shows you:
•basic installation setup
•how to install your unit
•how to play a DVD
•how you can watchTV on
the unit
For detailed operation of all the features, please also read the
User manual.
4
3
2
1
Docking Entertainment System
DVD Kitchen Radio
with dock for iPod
DCD778
Thankyou for choosing Philips.
Need help fast?
Readyour Quick Start Guide and/or
UserManual first for quick tips
that make using your Philips product
moreenjoyable.
Ifyou have read your instructions
andstill need assistance,
youmay access our online help at
www.philips.com/usasupport
Philipsvous remercie de
votreconfiance.
Besoin d'uneaide
rapide?
LesGuide d'utilisation rapide et Manuel de
l'utilisateurregorgent d'astuces destinées à
simplifierl'utilisation de votre produit Philips.
Toutefois,sivous ne par venez pas à résoudre
votreprobléme, vous pouvez accéder à
notreaide en ligne à l'adresse
www.philips.com/usasupport
Graciaspor escoger Philips
Necesita ayuda
inmediata?
Leaprimero la Guía de uso rápido o el
Manualdel usuario, en donde encontrará
consejosque le ayudarán a disfrutar
plenamentede su producto Philips.
Sidespués de leerlo aún necesita ayuda,
consultenuestro servicio de
asistenciaen línea en
www.philips.com/usasupport
DVD Kitchen Radio
with dock for iPod
Remote control
with one CR2025
battery loaded
Quick start guide
6 x iPod dock
adaptors
User manual
4 x screws
12V DC adapter
What else you'll need
These tools (not included) will help you mount the unit as described in part 3 Mount it, and on the
template.
Preparation
For best performance, install the unit as far as
possible from sources of noise and interference
(e.g. fridges, microwaves, fluorescent lamps)
aFind a mounting location near a wall outlet.
bUse the mounting template to test the design and
thickness of your kitchen cabinet bottom.
cDecide whether you want to connect the unit with
other audio/ visual equipment. ( See Bbelow)
Connect it
A
Connect the following supplied
accessories to the respective jacks on
the rear of the unit :
•12V DC power adapter
•Extend the FM pigtail antenna fixed
to the main unit
(The unit has bulit-in AM antenna.)
B
Other connections (cables not
included)
•For TV reception on the unit, connect a TV anten-
na/CATV cable (not supplied).
•For use with VCR or other audio/video appliances,
connect the composite cable and match the col-
ors of the cinches (AUDIO IN L/R,VIDEO IN) on the unit.
2
Electric drill Ta pe measure Scissors
Sellotape Screwdriver Safety goggles
324xxx PDCC-JH-0707
W
1
a
Template
b
To reduce the risk of fire,
do not place any heating or
cooking apparatus beneath
this unit.
2
AUDIO-R (Red)
AUDIO-L (White)
VIDEO (Yellow)
TV
DC
Remove the insulation plastic tab
before use
4 x spacers
Mount it
Aska friend to help you mount the unit as it is quite heavy.
A
•Cutthe template to fit inside the cabinet.
•Alignthe template border marked "FRONT"
alongthe front edge of your cabinet.
•Useadhesive tape to fix the template.
•Drill1/4 inch holes (size X.X mm diameter,X
inch),asmar ked Xon the template.
•Removethe template when you finishdr illing.
B
Usingthe spacers
Onthe spacers, there are 4 pairs of notch length
options.Dependingon the thickness of you cabi-
netbottom (with/ without an overhang),these
notchlengths correspond to the 4 notch height in
thespace holders, and allow youto adjust to the
bestheight to help you mount the unit.
•Measurethe height of the cabinet bottom
and/overhang.
•Turnthe spacer counterclockwise to determine
whichof the 4 heights is most suitable:High ••
Low
•Insertthe spacers accordingly.
C
•Manuallyfasten the 4screws down into the
spacerholder holes to mount your set.If the
overhangis more than 1 1/4 inch,use longer
screws(not included).
Tip
–Use a nail to start each drill hole.
–Hold your drill firmly at 90o with the cabinet bottom and drill holes at
lowspeed.
–Clear wood shavings.
Tip
Toprevent damage to your set, do not use an electric drill
tosecure screws when mounting!
–Hold the unit horizontally when installing it,since the CD tray may
openif the unit is shaken.
–Use the cable manager to manage excess power cordlength.
Template
A
H
L
Spacer
L(Low) L••H(4 heights)
Arrow
B
C
Use1/4"
drill
DC
VIDEO
IN
AUDIO
R
IN
L
TV
ANT
Recommendeddepth of cabinet
atthe rear to allow for connections
2.5"
Mounting
template
DCD778 QUG English 9/2/07 20:19 Page 1

Mount it
Ask a friend to help out. An extra hand to hold the unit makes mounting easier and
quicker.
A
•Cut the template to fit inside the cabinet.
•Align the template border marked "FRONT" along the
front edge of your cabinet.
•Use adhesive tape to fix the template.
•Drill 1/4 inch holes, as marked Xon the template.
•Remove the template when you finish drilling.
B
Using the spacers
On the spacers, there are 4 pairs of notch length
options. Depending on the thickness of you cabinet bot-
tom (with/ without an overhang), these notch lengths
correspond to the 4 notch height in the space holders,
and allow you to adjust to the best height to help you
mount the unit.
•Measure the height of the cabinet bottom and/over-
hang.
•Tu rn the spacer counterclockwise to determine
which of the 4 heights is most suitable: Low • •
High. Align to the arrow indication.
•Insert the spacers accordingly.
3
Template
A
Tip
– Clean the bottom of the cabinet surface and also empty your cabinet before mounting.
– Place the unit in a clean, safe place when drilling to avoid wood shavings dropping into the
ventilation slots.
– Use a nail to start each drill hole.
– Drill from the bottom upwards if you do not have enough room inside the cabinet.
– Hold your drill firmly at 90owith the cabinet bottom and drill holes at low speed.
– Clear wood shavings.
C
•Manually fasten the 4long screws down into the spacer holder holes to mount your set. Start
screwing at opposite corners of the unit for better support.
C
Tip
To prevent damage to your
set, do not use an electric
drill to secure screws when
mounting!
– If the overhang is more than 1 1/4 inch, use
longer screws (not included).
Use it
For full details, please read and follow the instructions inside the User manual.
A
Power supply
1Insere the DC plug of the AC adaptor to the 12V sock
on the back panel.
2Plug the AC plug of the AC adaptor to the wall socket.
3Press B(or SOURCE) to switch on.
B
Using the TV screen
1Press PUSH at the bottom the set to release the TV panel. .
2Pull down the panel (maximum 110º).
3Tu rn around the panel to find the screen.
4Adjust the screen to a suitable angle (maximum 270º).
C
How to play a DVD /CD
•Select DISC source.
•Press 0EJECT to open the disc tray.
•Insert a DVD/CD with the print side facing up, and close the disc tray.
•Press ÉÅ to start disc playback.
4
1
2
D
How to watch TV on the unit
1Press DTV/ATV on the remote control to select Digital TV (DTV) or Analog TV(ATV).
2The first time you use the TV, press and hold PROG on the set until the channel number starts
running.
•Available channels (DTV or ATV) are programmed.
3Use the Numeric Keypad (0-9) on the remote control to select the channel number directly.
•For Digital TV, you also need to press / ZOOM on the remote control to enable sub-channel
selection, then input your sub-channel number.
•To receive cable channel, you also need to press SYSTEM MENU on the remote control to
select TV Source (STD, HRC or IRC) according to your region.
Tip
– Swivel with care to avoid breakage. Screen rotates a maximum
2700only.
H
L
Spacer
L (Low)
L••H (4 heights)
Arrow
B
PUSH
1
2
3
4
Tip
– Refer to the user manual supplied for detailed descriptions of “Compatible
portable player”, “Selecting the correct dock adaptor”,“Installing the dock
adaptor”, and the important notes for dock operation.
E
Playing Apple iPod using DCD778
1Select the correct dock adaptor, as indicated on each adaptor,
then fit it in the dock.
2Correctly place the compatible iPod into the dock.
3Press iPod on the main unit (iPod/AV on
the remote control).
4Power on your iPod.
5Select and playback your favorite song/video/photo on the iPod.
1-a
1-b
Caution!
– To avoid the hanging power supply cord from touching
other heating or cooking apparatus to cause danger,
please use the fixer to fasten the cord on the wall or
route it away from other appliances when installing the
unit.
DCD778 QUG English 9/2/07 20:19 Page 2