Philips DVP3005/78 User manual

3139 246 15561
DVD VIDEO PLAYER DVP3005
User manual
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/support
01-33 DVP3005_LA2a 11/05/05, 3:08 PM1

3139 246 15561
AVISO IMPORTANTE
Philips Mexicana, S.A. de C.V. no se hace
responsable por daños o desperfectos causados por:
– Maltrato, descuido o mal uso, presencia de
insectos o roedores (cucarachas, ratones etc.).
– Cuando el aparato no haya sido operarado
de acuerdo con el instructivo del uso, fuera
de los valores nominales y tolerancias de las
tensiones (voltaje), frecuencia (ciclaje) de
alimentación eléctrica y las características
que deben reunir las instalaciones auxiliares.
– Por fenómenos naturales tales como:
temblores, inundaciones, incendios, descargas
eléctricas, rayos etc. o delitos causados por
terceros (choques asaltos, riñas, etc.).
Es necesario que lea cuidadosamente su instructivo de manejo.
Descripción:
Modelo:
Alimentación: 120 - 230V; ~50–60 Hz
Consumo:
Importador: Philips Mexicana, S.A. de C.V.
Domicilio: Av. La Palma No.6,
Col. San Fernando, La Herradura
Huixquilucan, Edo de Mexico
C.P. 52784, Mexico
Localidad y Tel.: Tel. [phone]
Exportador:
País de Origen:
Nºde Serie: ________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
No abrir, riesgo de choque eléctrico
Verifique que el voltaje de alimentación
sea el requerido para su aparato
ATENCIÓN
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
PRECAUCIÓN - ADVERTENCIA
México
Reprodução de DVDs
DVP3005
110 - 240V; 50-60Hz
< 10 W
01-33 DVP3005_LA2a 11/05/05, 3:08 PM2

3139 246 15561
English
Español
Português
3
Index
English --------------------------------------- 6
Español ------------------------------------ 34
Português --------------------------------- 62
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro-Logic” and the
double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital
Theater Systems, Inc. U.S. Pat. Nois.
5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and
other U.S. and world-wide patents issued
and pending. "DTS" and "DTS Digital
Surround" are registered trademarks
of Digital Theater Systems, Inc.
All Right Reserved.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Due to the inconsistency of disc formats
provided by various disc manufacturers, your
DVD system may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancements will become
common and will be easy to complete.
Go to www.philips.com/support for
software upgrade.
‘CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS
TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p
AND 625p DVD PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.’
01-33 DVP3005_LA2a 11/05/05, 3:08 PM3

3139 246 15561
General Information
CAUTION
(WARNING LOCATION: ON THE
BACKPLATE OF THE SET)
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”and the
double-D symbol are trademarks of Dolby
Laboratories.
Laser safety
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
PICTURES SHOWN MAYBE
DIFFERENT BETWEEN
COUNTRIES.
LASER
Type Semiconductor laser
GaAlAs
Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
For Customer Use:
Read carefully the information located at
the rear/bottom of your DVD VIDEO
player and enter below the Serial No.
Retain this information for future
reference.
Model No. DVP 3005
Serial No. _______________
Environmental Information
All unnecessary packaging has been
omitted.The packaging has been made
easy to separate into two materials:
cardboard (box, buffer) and polyethylene
(bags, protective foam sheet).
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Important Note:
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD Player is fully compatible
with such new discs. Should you have
difficulty playing any such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
Specifications are subject to change
without notice.Trademarks are the
property of Koninklijke Philips Electronics
N.V. or their respective owners.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on apparatus.
01-33 DVP3005_LA2a 11/05/05, 3:08 PM4

3139 246 15561
English
5
Abkhazian 6566
Afar 6565
Afrikaans 6570
Amharic 6577
Arabic 6582
Armenian 7289
Assamese 6583
Avestan 6569
Aymara 6589
Azerhaijani 6590
Bahasa Melayu 7783
Bashkir 6665
Belarusian 6669
Bengali 6678
Bihari 6672
Bislama 6673
Bokmål, Norwegian 7866
Bosanski 6683
Brezhoneg 6682
Bulgarian 6671
Burmese 7789
Castellano, Español 6983
Catalán 6765
Chamorro 6772
Chechen 6769
Chewa; Chichewa; Nyanja7889
9072
Chuang; Zhuang 9065
Church Slavic; Slavonic 6785
Chuvash 6786
Corsican 6779
Česky 6783
Dansk 6865
Deutsch 6869
Dzongkha 6890
English 6978
Esperanto 6979
Estonian 6984
Euskara 6985
 6976
Faroese 7079
Français 7082
Frysk 7089
Fijian 7074
Gaelic; Scottish Gaelic 7168
Gallegan 7176
Georgian 7565
Gikuyu; Kikuyu 7573
Guarani 7178
Gujarati 7185
Hausa 7265
Herero 7290
Hindi 7273
Hiri Motu 7279
Hrwatski 6779
Ido 7379
Interlingua (International)7365
Interlingue 7365
Inuktitut 7385
Inupiaq 7375
Irish 7165
Íslenska 7383
Italiano 7384
Ivrit 7269
Japanese 7465
Javanese 7486
Kalaallisut 7576
Kannada 7578
Kashmiri 7583
Kazakh 7575
Kernewek 7587
Khmer 7577
Kinyarwanda 8287
Kirghiz 7589
Komi 7586
Korean 7579
Kuanyama; Kwanyama 7574
Kurdish 7585
Lao 7679
Latina 7665
Latvian 7686
Letzeburgesch; 7666
Limburgan; Limburger 7673
Lingala 7678
Lithuanian 7684
Luxembourgish; 7666
Macedonian 7775
Malagasy 7771
Magyar 7285
Malayalam 7776
Maltese 7784
Manx 7186
Maori 7773
Marathi 7782
Marshallese 7772
Moldavian 7779
Mongolian 7778
Nauru 7865
Navaho; Navajo 7886
Ndebele, North 7868
Ndebele, South 7882
Ndonga 7871
Nederlands 7876
Nepali 7869
Norsk 7879
Northern Sami 8369
North Ndebele 7868
Norwegian Nynorsk; 7878
Occitan; Provencal 7967
Old Bulgarian;Old Slavonic 6785
Oriya 7982
Oromo 7977
Ossetian; Ossetic 7983
Pali 8073
Panjabi 8065
Persian 7065
Polski 8076
Português 8084
Pushto 8083
Russian 8285
Quechua 8185
Raeto-Romance 8277
Romanian 8279
Rundi 8278
Samoan 8377
Sango 8371
Sanskrit 8365
Sardinian 8367
Serbian 8382
Shona 8378
Shqip 8381
Sindhi 8368
Sinhalese 8373
Slovensky 8373
Slovenian 8376
Somali 8379
Sotho; Southern 8384
South Ndebele 7882
Sundanese 8385
Suomi 7073
Swahili 8387
Swati 8383
Svenska 8386
Tagalog 8476
Tahitian 8489
Tajik 8471
Tamil 8465
Tatar 8484
Telugu 8469
Thai 8472
Tibetan 6679
Tigrinya 8473
Tonga (Tonga Islands) 8479
Tsonga 8483
Tswana 8478
Türkçe 8482
Turkmen 8475
Twi 8487
Uighur 8571
Ukrainian 8575
Urdu 8582
Uzbek 8590
Vietnamese 8673
Volapuk 8679
Walloon 8765
Welsh 6789
Wolof 8779
Xhosa 8872
Yiddish 8973
Yoruba 8979
Zulu 9085
Language Code
01-33 DVP3005_LA2a 11/05/05, 3:08 PM5

3139 246 15561
English
6
Language Code .......................... 5
Introduction
Supplied accessories ....................................... 8
Care and safety information.......................... 8
Connections
Connecting TV ............................................ 9-10
Using Composite Video jacks (CVBS) ........ 9
Using Component Video jacks (Pr Pb Y) ... 9
Using an accessory RF modulator ............ 10
Connecting the power cord ........................ 10
Optional: Connecting to an Audio System ...
........................................................................... 11
Stereo system has Dolby Pro Logic or Right
/ Left Audio In jack ....................................... 11
Optional: Connecting Digital AV Receiver ...
........................................................................... 11
Receiver has a PCM, Dolby Digital, or
MPEG2 decoder ............................................ 11
Functional Overview
Front and Rear Panels .................................. 12
Remote Control ............................................ 13
Getting Started
Step 1: Inserting batteries into the
Remote Control ............................................ 14
Using the Remote Control to operate the
Player ............................................................... 14
Step 2: Setting up the TV ........................ 14-16
Setting up Progressive Scan feature (for
Progressive Scan TV only) ........................... 15
To deactivate Progressive manually .......... 16
Selecting the colour system that
corresponds to your TV .............................. 16
Step 3: Setting language preference ........... 17
Setting the OSD Language .......................... 17
Setting the Audio, Subtitle and Disc menu
language .......................................................... 17
Disc Operations
Playable Discs ................................................. 18
Region Codes ................................................. 18
Playing discs ..................................................... 18
Basic playback controls................................. 19
Selecting various repeat/shuffle functions 19
Repeat play mode ......................................... 19
Repeating a section within a chapter/track .
......................................................................... 19
Operations for video playback ................... 20
Using the Disc Menu.................................... 20
Zooming in ..................................................... 20
Resuming playback from the last stopped
point ................................................................ 20
Slow motion ................................................... 20
OSD (On-Screen Display) .......................... 20
Special DVD features .................................... 21
Playing a Title ................................................. 21
Camera Angle ................................................ 21
Changing the Audio Language .................... 21
Subtitles .......................................................... 21
Special VCD & SVCD Features ................... 21
Playback Control (PBC) .............................. 21
Playing MP3/JPEG (Kodak) Picture CD ..... 22
General Operation ....................................... 22
Playback selection ......................................... 22
Repeat ............................................................. 22
Fast Forward/Reverse (MP3) ..................... 22
Contents
01-33 DVP3005_LA2a 11/05/05, 3:08 PM6

3139 246 15561
English
7
Contents
DVD Setup Menu Options
General Setup menu ..................................... 23
Dimming player’s display panel .................. 23
OSD Language ............................................... 23
Sleep ................................................................ 23
Screen Saver - turning on/off ..................... 23
Audio Setup Menu ................................... 24-25
Setting the Downmix ................................... 24
Digital Audio Setup ................................ 24-25
Video Setup Menu ................................... 25-27
TV Type ........................................................... 25
Setting the TV Display ................................. 26
Progressive - turning on/off ........................ 26
Sharpness ........................................................ 27
Brightness/Contrast ..................................... 27
Preference Page ........................................ 28-29
Audio, Subtitle, Disc Menu .......................... 28
Restricting playback by Parental Control .....
......................................................................... 28
Changing the Password ............................... 29
Restoring to original settings ..................... 29
Troubleshooting ......................... 30–31
Specifications ...................................... 32
Glossary ...................................................................... 33
01-33 DVP3005_LA2a 11/05/05, 3:08 PM7

3139 246 15561
English
8
Supplied accessories
Remote Control
and
two AA batteries
Introduction
Care and safety information
●Power consumption
– When the system is switched to
Standby mode, it is still consuming power.
To disconnect the system from the power
supply completely, remove the AC power
plug from the wall jack.
●Avoid high temperatures, moisture,
water and dust
– Do not expose the player, batteries or
discs to humidity, rain, sand or excessive
heat (caused by heating equipment or
direct sunlight.)
PREVIEW
PREVIEW
MUTE
MUTE
●Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings, making it impossible
to play a disc. Leave the player in the
warm environment until the moisture
evaporates.
●Do not block the vents
– Do not operate the DVD Player in an
enclosed cabinet, allow about 10 cm (4
inches) of free space all around the player
for adequate ventilation.
10 cm
(4 inches)
10 cm
(4 inches) 10 cm
(4 inches)
DVD Home Cinema System
PHILIPS
●Care of the cabinet
– Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.
●Finding a suitable location
– Place the player on a flat, hard, and
stable surface.
●Disc handling
– To clean a CD, wipe it in a
straight line from the center
towards the edge using a soft,
lint-free cloth. A cleaning
agent may damage the disc!
– Write only on the printed
side of a CDR(W) and only with a soft felt-
tipped pen.
– Handle the disc by its edge, do not
touch the surface.
Audio (white, red)
cables /
Video (yellow)
cable
01-33 DVP3005_LA2a 11/05/05, 3:08 PM8

3139 246 15561
English
9
Connections
Connecting TV
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
– Connect the DVD Player directly
to the TV.
Using Composite Video jacks
(CVBS)
1Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In,Video In, Composite or Baseband)
on the TV (cable supplied).
2To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
AUDIO
OUT
DIGITAL
OUT
CVBS
VIDEO
OUT
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
2
1
AUDIO
OUT
DIGITAL
OUT
CVBS
VIDEO
OUT
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
21
IMPORTANT!
– The progressive scan video
quality is only possible when usingY
Pb Pr and a progressive scanTV is
required.
Using Component Video jacks
(Y Pb Pr)
1Use the component video cables (red/
blue/green) to connect the DVD system’s
Y Pb Pr jacks to the corresponding
Component video input jacks (or labeled
as Y Pb Pr) on the TV (cable not supplied).
2To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
3Proceed to page 15 for detailed
Progressive Scan set up.
01-33 DVP3005_LA2a 11/05/05, 3:08 PM9

3139 246 15561
English
10
A
UDIO
OUT
DIGITAL
OUT
CVBS
VIDEO
OUT
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
2
1
Connections
IMPORTANT!
– If yourTV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
1Use the composite video cable (yellow) to
connect the DVD Player’s CVBS jack to
the video input jack on the RF modulator.
2Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s
RF jack.
RF coaxial cable to TV
Back of RF Modulator
(example only)
Antenna or
Cable TV signal
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD Player
front panel,
“NO DISC” may appear on the
display panel.
Connecting the power cord
NO DISC
AUDIO
OUT
DIGITAL
OUT
~ AC MAINS
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
01-33 DVP3005_LA2a 11/05/05, 3:08 PM10

3139 246 15561
English
11
Connections
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
Optional: Connecting to an
Audio System
Optional: Connecting Digital AV
Receiver
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 24
“Digital Output”).
Helpful Hint:
–If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
OUT
DIGITAL
OUT
CVBS
VIDEO
OUT
AUDIO
IN
STEREO
DIGITAL
AUDIO
OUT
DIGITAL
OUT
CVBS
VIDEO
OUT
AUDIO
IN
DIGITAL
AV Receiver
01-33 DVP3005_LA2a 11/05/05, 3:08 PM11

3139 246 15561
English
12
Functional Overview
Front and Rear Panels
T NEXT
– To select next chapter or track
IR Sensor
– Point the remote control towards this
sensor
9 STOP
– To stop playback
2; PLAY
– To start or interrupt playback
PREV S
– To select previous chapter or track
STANDBY-ON B
– To switch the DVD Player to Standby
mode or ON
Disc tray
OPEN/CLOSE /
– Open/Close the disc tray
Display
– Shows the current status of the DVD
Player
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
CVBS (VIDEO Out)
– Connect to CVBS Video input of a TV
YPbPr (Component Video Out)
– Connect to YPbPr input of a TV
AUDIO
OUT
DIGITAL
OUT
CVBS
VIDEO
OUT
Mains (AC Power Cord)
– Connect to a standard AC outlet
Audio Out (Left/Right)
– Connect to AUDIO inputs of an amplifier,
receiver or stereo system
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input of a
digital audio equipment
01-33 DVP3005_LA2a 11/05/05, 3:08 PM12

3139 246 15561
English
13
Functional Overview
Remote Control
PREVIEW MUTE
RETURN / TITLE
– To go back to previous menu /
show title menu
DISC MENU
– Enters or exits the disc contents
menu
– Switches on or off the playback
control mode (for VCD version
2.0 only)
1 2 3 4
– Selects an item in the menu/
fast backward/forward, slow forward
OK
– Acknowledge menu selection
S
– To select previous chapter or track
STOP ( 9)
– To stop playback
PLAY ( B)
– To start playback
PAUSE ( ;)
– To pause playback temporarily /
frame-by-frame playback
REPEAT
– Selects various repeat modes
REPEAT (A-B)
– Repeats playback a specific section
on a disc
PREVIEW
– Not applicable for this model
MUTE
– Disables or enables sound output
POWER B
– To switch the DVD player to
standby mode or ON
0-9 numerical key pad
– Selects numbered items in a
menu
DISPLAY
– Displays information on TV
screen during playback
SYSTEM MENU
– Access or exit DVD Player’s
system menu
T
– To select next chapter or track
SUBTITLE
– To access subtitle language in disc
menu
ANGLE
– Selects a DVD camera angle
ZOOM
– Enlarge a picture on the TV
screen
AUDIO
– To access audio language in disc
menu
01-33 DVP3005_LA2a 11/05/05, 3:08 PM13

3139 246 15561
English
14
PREVIEW
PREVIEW
MUTE
MUTE
Getting Started
Step 1: Inserting batteries into
the Remote Control
1
3
2
1Open the battery compartment.
2Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3Close the cover.
Using the Remote Control to
operate the Player
1Aim the Remote Control
directly at the remote
sensor (IR) on the front
panel.
2Do not put any objects
between the Remote
Control and the DVD
Player while operating the
DVD Player.
CAUTION!
–Remove batteries if they are
exhausted or if the Remote Control
is not being used for a long time.
–Do not use old and new or
different types of batteries in
combination.
–Batteries contain chemical
substances, so they should be
disposed properly.
Step 2: Setting up the TV
IMPORTANT!
Make sure you have completed all
the necessary connections. (See
pages 9-10 “Connecting TV”).
1Turn on the TV and set to the correct
video-in channel. You should see the
Philips DVD background screen on the
TV.
2Usually these channels are between the
lowest and highest channels and may be
called FRONT,A/V IN, or VIDEO. See your
TV manual for more details.
➜Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
➜Or, the TV Remote Control may have a
button or switch that chooses different
video modes.
➜Or, set the TV to channel 3 or 4 if you
are using an RF modulator.
3If you are using external equipment, (eg.
audio system or receiver), turn it on and
select the appropriate input source for
the DVD Player output. Refer to the
equipment owner’s manual for detail.
01-33 DVP3005_LA2a 11/05/05, 3:09 PM14

3139 246 15561
English
15
Getting Started
Setting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system).With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals,
a progressive scan TV is required.
2) You have connected the DVD player to
your TV using Y Pb Pr (see page 9.)
1Turn on your TV.
2Turn off your TV progressive scan mode
or turn on interlaced mode (refer to your
TV user manual.)
3Press POWER on the remote control to
turn on the DVD player.
4Select the correctVideo Input channel.
(See page 14).
➜The DVD background screen appears
on the TV.
5Press SYSTEM MENU.
6Press 2repeatedly to select {VIDEO
SETUP PAGE}.
General Audio Video Preference
TY Type
TV Display
Progressive On
Sharpness Off
Brightness
Contrast
- - Video Setup Page - -
7Select {PROGRESSIVE} to {ON}, then OK
to confirm.
➜The instruction menu appears on the
TV.
. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS DISTORTED PICTURE, WAIT
Cancel
OK
ACTIVATING PROGRESSIVE SCAN:
5 SECONDS FOR AUTO RECOVERY.
8Press 1to highlight
OK
in the menu
and press OK to confirm.
There will be a distorted picture on
your TV at this state until you turn
on the progressive scan mode on
your TV.
9Turn on your TV progressive scan mode
(refer to your TV user manual.)
➜The below menu appears on the TV.
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF THE PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE
Cancel
OK
0Press 1to highlight
OK
in the menu
and press OK to confirm.
➜The set up is complete now and you
can start enjoy the high quality picture.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
01-33 DVP3005_LA2a 11/05/05, 3:09 PM15

3139 246 15561
English
16
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
General Audio Video Preference
TY Type PAL
TV Display Multi
Progressive NTSC
Sharpness
Brightness
Contrast
- - Video Setup Page - -
1Press SYSTEM MENU.
2Press 2repeatedly to select {VIDEO
SETUP PAGE}.
3Press 34to highlight {TV TYPE}, then
press 2.
Getting Started
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
4Press 34to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
5Select an item and press OK.
Helpful Hints:
–Before changing the currentTV
Standard setting, ensure that your TV
supports the ‘selected TV Type’system.
–If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
CHANGING PAL TO NTSC:
. ENSURE THAT YOUR TV SUPPORTS
NTSC STANDARD.
2. IF THERE IS DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 5
SECONDS FOR AUTO RECOVERY.
CANCELOK
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
CANCELOK
To deactivate Progressive manually
●When the distorted picture still
appears on the TV, it may be due to
the connected TV does not accept
progressive signals, and progressive is set
by mistake. You must reset the unit to
interlace format.
1Turn off your TV progressive scan mode
or turn on to interlaced mode (refer to
your TV user manual.)
2Press OPEN/CLOSE on the DVD player
to open the disc tray.
3Press numeric keypad ‘1’on the
remote control for few seconds.
➜The DVD blue background screen
will appear on the TV.
01-33 DVP3005_LA2a 11/05/05, 3:09 PM16

3139 246 15561
English
17
Step 3: Setting language
preference
You can select your preferred language
settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc.
Setting the OSD Language
The On-screen language for the system
menu will remain as you set it, regardless
of various disc languages.
Display Dim
OSD Language ENGLISH
Sleep ESPAÑOL
Screen Saver PORTUGUÊS
- - General Setup Page - -
General Audio Video Preference
1Press SYSTEM MENU.
2Press 34to highlight {OSD
LANGUAGE}, then press 2.
3Press 34 to select a language and press
OK.
Getting Started
Setting the Audio, Subtitle and Disc
menu language
You can choose your own preferred
language or soundtrack from audio,
subtitles and disc menu languages. If the
language selected is not available on the
disc, the disc’s default language will be
used instead.
General Audio Video Preference
Audio English
Subtitle Chinese
Disc Menu French
Parental Spanish
Password Portuguese
Default Polish
Turkish
- - Preference Page - -
1Press STOP twice then, press SYSTEM
MENU.
2Press 2repeatedly to select
{PREFERENCE PAGE}.
3Press 34to highlight one of the options
below at a time, then press 2.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
– ‘Disc Menu’ (disc’s menu)
4Press 34to select a language and press
OK.
If the language you want is not in the
list, then select {OTHERS},
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code ‘XXXX’ (see page 5 “Language
Code”) and press OK.
5Repeat steps 3~4for other language
settings.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
01-33 DVP3005_LA2a 11/05/05, 3:09 PM17

3139 246 15561
English
18
Disc Operations
IMPORTANT!
–If the inhibit icon (ø) appears on
the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
–Depending on the DVD orVIDEO
CD, some operations may be
different or restricted.
–Do not push on the disc tray or
put any objects other than disc on
the disc tray. Doing so may cause
the disc player malfunction.
Playable Discs
Your DVD Player will play:
– Digital Versatile Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Digital Video Discs +
Recordable[Rewritable] (DVD+R[W])
– Compact Discs (CDs)
– MP3 discs, picture (Kodak, JPEG) files
on CD-R(W).
– JPEG/ISO 9660 format
– Maximum 30 characters display.
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)
– Supported Bit-rates :
32~256 kbps (MPEG-1), variable bitrates
SUPER VIDEO
Region Codes
DVD discs must be labeled for ALL
regions or Region 4 in order to
play on this Player.You cannot play
Discs that are labeled for other
regions.
Helpful Hints:
–It may not be possible to play CD-R/RW
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
–If you are having trouble playing a
certain disc, remove the disc and try a
different one. Improper formatted disc will
not play on this DVD Player.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Playing discs
1Connect the power cords of the DVD
Player and TV (and any optional stereo or
AV receiver) to a power outlet.
2Turn on the TV power and set to the
correct Video In channel. (See page 14
“Setting up the TV”).
3Press STANDBY-ON on the DVD Player
front panel.
➜You should see the Philips DVD
background screen on the TV.
4Press OPEN/CLOSE 0button to open
the disc tray and load in a disc, then press
the same button again to close the disc
tray.
➜Make sure the label side is facing up.
For double-sided discs, load the side you
want to play facing up.
5Playback will start automatically. If not
press PLAY B.
➜If a disc menu appears on the TV, see
page 20 “Using the Disc Menu”.
ALL
4
01-33 DVP3005_LA2a 11/05/05, 3:09 PM18

3139 246 15561
English
19
Disc Operations
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
1During playback, press PAUSEÅ.
➜Playback will pause and sound will be
muted.
2To resume normal playback, press
PLAY B.
Selecting track/chapter
1Press T/ Sbriefly during playback
to go to the next chapter/track or to
return to the beginning of the current
chapter/track respectively.
2To go directly to any chapter/track, enter
the chapter/track number using the
numerical keys (0-9).
(e.g. single number of chapter/track with
digit ‘0’ in front, for example ‘06’)
●For DVD
➜Press Stwice briefly to step back
to the previous chapter/track.
●For VCD
➜It cannot work when PBC is set to
‘ON’.
Searching backward/forward
1Press 12during playback to select the
required speed: 2X, 4X, 8X, 16X or 32X
(backward or forward).
➜Sound will be muted (DVD/VCD) or
intermittent (CD).
2To return to normal speed, press PLAY B
or OK.
Stopping playback
●Press Ç.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Selecting various repeat/shuffle
functions
Repeat play mode
●Press REPEAT continuously to choose a
Repeat mode during playback.
CHAPTER (DVD)
– to repeat playback of the current
chapter.
TRACK/TITLE (CD/SVCD/VCD/DVD)
– to repeat playback of the current
track (CD/SVCD/VCD)/title (DVD).
ALL
– to repeat playback of the disc.
OFF
– to cancel the repeat mode.
●Press REPEAT repeatedly to cancel the
repeat mode.
Helpful Hint:
–REPEAT function is not available for VCD
2.0 when PCB is on.
Repeating a section within a
chapter/track
1While playing a disc, press REPEAT A-B
at your chosen starting point.
2Press REPEAT A-B again at your chosen
end point.
➜The section will now repeat
continuously.
3To exit the sequence, press REPEAT
A-B.
01-33 DVP3005_LA2a 11/05/05, 3:09 PM19

3139 246 15561
English
20
Operations for video playback
(DVD/VCD/SVCD)
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load in
the disc.
To select a playback feature or item
●Use 1234keys or numeric keypad
(0-9) on the remote, then press OK to
start playback.
To access or remove the menu
●Press DISC MENU on the remote.
Zooming in
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
1During playback, press ZOOM
repeatedly to display the picture with
different scales.
➜Use 1234keys to pan through the
enlarged picture.
➜Playback will continue.
2Press ZOOM repeatedly to return to
the original size.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Disc Operations
Resuming playback from the last
stopped point
During playback, press STOP once (the
disc has not been ejected) to activate the
resume mode.
●Press PLAY B.
➜Playback will start from the last stop
point.
●Press STOP twice to cancel the resume
mode.
Helpful Hint:
–Resume option may not be available on
some discs.
Slow Motion
1Press 3during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(forward).
➜Sound will be muted.
2To return to normal speed, press PLAY B.
Helpful Hint:
–Slow backward is not possible on VCDs.
OSD (On-Screen Display)
This function displays disc information on
the TV screen during playback.
1During playback, press DISPLAY
repeatedly.
➜A list of available disc information
appears on the TV screen.
2Use 12keys to select an option.
3Enter hours, minutes and seconds from
left to right in the time edit box using
remote control numerical key pad.
➜Playback will change to the chosen time
or to the selected title/chapter/track.
For DVD
➜{Title CT:TT Chapter XX/TC}: displays
the total available title and chapters in the
disc and enable to select a chapter for
viewing.
➜{Title CT:TT Time X:XX:XX}: displays
the total available title in the disc and
enable to select the hour, minute and
second of the title.
➜{Chapter CC:TC Time X:XX:XX}:
displays the total available chapter in the
disc and enable to select the hour, minute
and second of the title.
For Super VCD or VCD
➜{Disc Go To XX:XX}: enable to select
any part within the disc.
➜{Track Go To XX:XX}: enable to select
any part within the current track.
➜{Select Track XX:TT}: enable to select
any track.
01-33 DVP3005_LA2a 11/05/05, 3:09 PM20