Philips DVP3520 User manual

DVP3520
Register your product and get support at
www.philips.com/welcome
EN User manual 3
DA Brugervejledning 19
DE Benutzerhandbuch 35
EL ƆƣƷƥƩƱƟƤƩƯ ƷƱƞƳƧƲ 53
ES Manual del usuario 73
FI Käyttöopas 91
FR Mode d’emploi 107
IT Manuale utente 125
NL Gebruiksaanwijzing 143
PL Instrukcja obsãugi 161
PT Manual do utilizador 179
SV Användarhandbok 197
TR Kullanım kılavuzu 213

2
Italia
DICHIARAZIONE DI CONFORMITA’
Si dichiara che l’apparecchio DVP3520, Philips
risponde alle prescrizioni dell’art. 2 comma 1 del
D.M. 28 Agosto 1995 n.548.
Fatto a Eindhoven
Philips Consumer Lifestyles
Philips, Glaslaan 25616 JB Eindhoven,
The Netherlands
DK
Advarsel: Usynlig laserstråling ved åbning når
sikkerhedsafbrydere er ude af funktion. Undgå
utsættelse for stråling.
Bemærk: Netafbryderen er sekundært indkoblet
og ofbryder ikke strømmen fra nettet. Den
indbyggede netdel er derfor tilsluttet til lysnettet
så længe netstikket sidder i stikkontakten.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat sätt
än i denna bruksanvisning specifi cerats, kan
användaren utsättas för osynlig laserstrålning, som
överskrider gränsen för laserklass 1.
Observera! Stömbrytaren är sekundärt kopplad
och bryter inte strömmen från nätet. Den
inbyggda nätdelen är därför ansluten till elnätet så
länge stickproppen sitter i vägguttaget.
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin
tässä käyttöohjeessa mainitulla tavalla saattaa
altistaa käyttäjän turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa
olla alttiina tippu-ja roiskevedelle. Huom.
Toiminnanvalitsin on kytketty toisiopuolelle,
eikä se kytke laitetta irti sähköverkosta.
Sisäänrakennettu verkko-osa on
kytkettynä sähköverkkoon aina silloin, kun pistoke
on pistorasiassa.
Norge
Typeskilt fi nnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
frakoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
For å redusere faren for brann eller elektrisk
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
Producent zastrzega moůliwoőĂ wprowadzania
zmian technicznych.
LASER
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION:
INSIDE, NEAR THE DECK MECHANISM.
This product is in compliance with the EEE
directive.
EEE yönergesine uygundur.

3
English
EN
Contents
1 Important 4
Safety and important notice 4
2 Your DVD player 5
Playable media 5
Product overview 5
3 Connect 6
Connect audio/video cables 6
Route audio to other devices 7
Connect USB flash drive 7
Connect power 8
4 Get started 8
Prepare the remote control 8
Find the TV input channel 8
Select menu display language 8
Turn on progressive scan 8
5 Play 9
Play a disc 9
Play video 9
Play music 10
Play photo 11
Play musical slideshow 12
Play from a USB flash drive 12
6 Advanced features 12
Media copy 12
Create MP3 files 12
7 Adjust settings 13
General setup 13
Audio setup 14
Video setup 15
Preferences 15
8 Additional information 17
Update software 17
Care 17
Specifications 17
9 Troubleshooting 18
Trademark notice
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Windows Media and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
ABOUT DIVX VIDEO: DivX®is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video. Visit
www.divx.com for more information and software
tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified®device must be registered in order to
play DivX Video-on-Demand (VOD) content. To
generate the registration code, locate the DivX
VOD section in the device setup menu. Go to vod.
divx.com with this code to complete the registration
process and learn more about DivX VOD.
DivX®, DivX Certified®and associated logos are
registered trademarks of DivX, Inc. and are used
under license.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.

4
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences for
the environmental and human health.
Copyright notice
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
CLASS 1
LASER PRODUCT
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product in a•
confined space. Always leave a space of at least 4 inches
around the product for ventilation. Ensure curtains or
other objects never cover the ventilation slots on the
product.
Never place the product, remote control or batteries
•
near naked flames or other heat sources, including direct
sunlight.
Avoid high temperature, moisture, water and dust.
•
This unit must not be exposed to dripping or splashing.•
Never place any object or items that can damage this•
unit (e.g., liquid filled objects, lighted candles).
Never place this product on other electrical equipment.
•
Keep away from this product during lightning storms.•
Where the mains plug or an appliance coupler is used as•
the disconnect device, the disconnect device shall remain
readily operable.
Visible and invisible laser radiation when open. Avoid
•
exposure to beam.
This product complies with the radio interference
requirements of the European Community.
About Progressive Scan
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard definition’
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
Disposal of your old product and batteries
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
EN

5
Remote control
a
b
c
d
e
f
g
i
j
h
n
o
l
m
k
r
p
q
a
Turn on the unit or switch to standby.•
b
Open or close the disc compartment.•
2 Your DVD player
Congratulations on your purchase, and welcome to
Philips! To fully benefit from the support that Philips
offers, register your product at www.philips.com/
welcome.
Playable media
This product can play:
DVD, DVD-Video, DVD+R/+RW, DVD-R/-•
RW, DVD+R/-R DL (Dual Layer)
Video CD/SVCD•
Audio CD, CD-R/CD-RW•
MP3 media, WMA media, DivX (Ultra) media,•
JPEG files
USB flash drive•
Region codes
You can play discs with the following region codes.
DVD region code Countries
Europe
Product overview
Main unit
a
Turn on the unit or switch to standby.•
b Disc compartment
c Display panel
d
Open or close the disc compartment.•
e
Start, pause or resume disc play.•
f (USB)jack
Connect a USB flash drive.•
a b c d e f
English
EN

6
3 Connect
All audio/video cables are sold separately.
Make the following connections to use this product.
Basic connections:
Video•
Audio•
Optional connections:
Route audio to other devices:•
Digital amplifier/receiver•
Analog stereo system•
USB flash drive•
Note
Refer to the type plate at the back or bottom of the•
product for identification and supply ratings.
Before you make or change any connections, ensure that
•
all the devices are disconnected from the power outlet.
Connect audio/video cables
Connect this product to TV to view disc play. Select
the best video connection that TV can support.
• Option 1: Connect to component video jacks
(for a standard TV or Progressive Scan TV).
• Option 2: Connect to scart jack (for a
standard TV).
• Option 3: Connect to video (CVBS) jack (for a
standard TV).
Note
You must connect this product directly to a TV.•
Option 1: Connect to component video
jacks
Pb
Y
Pr
Pb
COMPONENT VIDEO OUT
YPr
c DISC MENU
Access or exit the disc menu.•
Switch to the disc mode.•
During the play of a photo slideshow,•
switch between the Fun Mode and
Simple Mode.
For VCD and SVCD: turn on or off PBC•
(playback control).
d
Navigate the menus.•
Search fast-forward (•) or fast-backward
().
Search slow-forward (•) or slow-
backward ( ).
e BACK
Return to the previous display menu.•
f /
Skip to the previous or next title, chapter,•
or track.
g
Switch to the USB mode.•
h Numeric buttons
Select an item to play.•
i SUBTITLE
Select a subtitle language on a disc.•
Access the menu of copying/deleting•
USB audio files.
j ZOOM
Fit the picture display to the TV screen.•
Zoom the picture in or out.•
k REPEAT
Select various repeat play modes.•
l REPEAT A-B
Repeat play for a specific section.•
m AUDIO/CREATE MP3
Select an audio language or channel on a disc.•
Access the menu of creating MP3 files.•
n
Stop play.•
o
Start, pause or resume disc play.•
p INFO
For discs: access the play options or•
display the current disc status.
For slideshows: display a thumbnail view•
of photo files.
q OK
Confirm an entry or selection.•
r SETUP
Access or exit the setup menu.•
EN

7
Connect to digital amplifier/receiver
1 Connect a coaxial cable to:
the• COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on•
the device.
Connect analogue stereo system
1 Connect the audio cables to:
the• AUDIO OUT L/R jacks on this
product.
the audio input jacks on the device.•
Connect USB flash drive
1 Connect a USB flash drive to the jack on
this product.
Note
This product can only play/view MP3, WMA, DivX•
(Ultra) or JPEG files that are stored on a USB flash drive.
Press the
• button to access the content and play
the files.
COAXIAL
DIGITAL
OUT
DIGITAL IN
1 Connect the component video cables to:
the• Y Pb Pr jacks on this product.
the COMPONENT VIDEO input jacks•
on the TV.
2 Connect the audio cables to:
the• AUDIO OUT L/R jacks on this
product.
the audio input jacks on the TV.•
Option 2: Connect to scart jack
1 Connect a scart cable to:
the• TV OUT jack on this product.
the scart input jack on the TV.•
Option 3 : Connect to video (CVBS) jack
1 Connect a composite video cable to:
the• VIDEO OUT jack on this product.
the video input jack on the TV.•
2 Connect the audio cables to:
the• AUDIO OUT L/R jacks on this
product.
the audio input jacks on the TV.•
Route audio to other devices
Route the audio from this product to other devices
to enhance audio play.
English
EN

8
Select menu display language
1 Press SETUP.
»[General Setup] menu is displayed.
2 Select [OSD Language], and then press .
3 Press to select a language, and then press OK.
Turn on progressive scan
Note
To use the progressive scan feature, you must connect a•
progressive scan TV with the component video jacks (see
“Connect” > “Connect audio/video cables” > “Option 1:
Connect to the component video jacks” for details).
1 Turn on the TV to the correct viewing channel
for this product.
2 Press SETUP.
3 Press to select [Video Setup].
4 Select [Component Video] > [Interlaced],
and then press OK.
5 Select [Progressive] > [On], and then press OK.
A warning message is displayed.»
6 To proceed, select [Ok] and then press OK.
The progressive setup is complete.»
Connect power
Caution
Risk of product damage! Ensure that the power supply•
voltage corresponds to the voltage printed on the back
of the unit.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.•
1 Connect the AC power cable to the wall socket.
The player is ready to be set up for use.»
4 Get started
Prepare the remote control
1 Press and push the battery compartment to
slide it open (see “1” in the illustration).
2 Insert two AAA batteries with correct
polarity (+/-) as indicated.
3 Push and slide back the battery compartment
(see “3” in the illustration).
Note
If you are not going to use the remote control for a long•
time, remove the batteries.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input channel
1 Press to turn on this product.
2 Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
EN

9
Play video
Note
Some operations may not work with some discs. See the•
information accompanying the disc for details.
Control video play
1 Play a title.
2 Use the remote control to control the play.
Button Action
Start, pause or resume disc play.
Stop disc play.
,
Skip to a previous/next title or chapter.
, Search fast-backward or fast-
forward. Press repeatedly to change
the search speed.
, Search slow-forward or slow-
backward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
AUDIO/
CREATE
MP3
Select an audio language or channel
available on a disc.
SUBTITLE Select a subtitle language available
on a disc.
REPEAT Select or turn off repeat mode.
Repeat options may vary from disc
type.
REPEAT A-B Repeat a specific section within a
track/disc.
ZOOM
(Screen fit)
Fit the picture format to the TV screen.
Press repeatedly until the image is
scaled to fit to the TV screen.
ZOOM Toggle between screen aspect ratio
and different zoom factor.
To pan through the zoomed image,
press the Navigation buttons.
INFO Access the play options and display
the current disc status.
Access DVD menu
1 Press DISC MENU to access the disc root menu.
2 Select a play option, then press OK.
In some menus, press the• Numeric
buttons to input your selection.
Note
If a blank/distorted screen is displayed, wait for•
15 seconds for the auto recovery.
If no picture is displayed, turn off the progressive scan
•
mode as follows:
1) Press to open the disc compartment.
2) Press the Numeric button ‘1’.
7 Press SETUP to exit the menu.
8 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
During play, when the progressive scan mode is on for•
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc•
compartment.
Do not touch the disc optical lens inside the disc compartment.
•
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
3 Press to close the disc compartment and
start disc play.
To view disc play, turn on the TV to the•
video input channel.
To stop disc play, press•.
Note
Check the types of discs supported (see “Your DVD•
player” > “Playable media”).
If the password entry menu is displayed, enter the
•
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” >
[Parental Control]).
If you pause or stop a disc, the screen saver appears after
•
5 minutes of inactivity. To deactivate the screen saver,
press DISC MENU.
After you pause or stop a disc and no button is pressed
•
within 15 minutes, this product automatically switches
to standby.
English
EN

10
View DVD play from different angles
1 During play, press INFO.
The disc status menu is displayed.»
2 Select [Angle], and then press .
3 Press the Numeric buttons to change the angle.
Play changes to the selected angle.»
Note
Applicable only to discs that contain multi-angle scenes.•
Repeat play for a specific section
1 During play, press REPEAT A-B at the start
point.
2 Press REPEAT A-B again to set the end point.
Repeat play starts.»
3 To cancel repeat play, press REPEAT A-B again.
Note
The marked section for repeat play is only possible•
within a track/title.
Play DivX®(Ultra) video
DivX®(Ultra) video is a digital media format
that retains high quality despite a high rate of
compression. You can enjoy DivX®(Ultra) video on
this DivX (Ultra) certified product.
1 Insert a disc or USB flash drive that contains
the DivX (Ultra) videos.
For USB, press• .
A contents menu is displayed.»
2 Select a title to play, then press OK.
You may select subtitle/audio language.•
Note
You can only play DivX (Ultra) video that is rented•
or purchased with the DivX registration code of this
product (see “Adjust Settings” > “General Setup” >
[DivX(R) VOD Code]).
Play music
Control a track
1 Play a track.
2 Use the remote control to control the play.
Access VCD menu
The PBC (playback control) feature is available for
VCD/SVCD, which can display the contents menu
for you to select a play option. The PBC is on by
default in the factory.
Note
See “Adjust settings” > “Preferences” >• [PBC] on how
to turn PBC on or off.
1 Display the contents menu via one of the
following ways:
If PBC is on, load in a VCD/SVCD.•
During play with PBC on, press•BACK.
2 Press the Numeric buttons to select a play
option, and then press OK to start play.
If PBC is turned off, it skips the menu•
display and starts play from the first track.
Preview disc contents
1 During play, press INFO.
The disc status menu is displayed.»
2 Select [Preview], and then press .
3 Select a preview option, and then press OK.
A thumbnails preview screen is displayed.»
To go to the next/previous preview•
screen, select [Prev] or [Next], and then
press OK.
To start play, press•OK at the selected
thumbnail picture.
Skip play to a specific time
1 During play, press INFO.
The disc status menu is displayed.»
2 Select an option for the current elapsed
playing time, and then press .
• [TT Time] (title time)
• [CH Time] (chapter time)
• [Disc Time]
• [Track Time]
3 Press the Numeric buttons to enter the time
to skip to, then press OK.
Display play time
1 During play, press INFO.
The disc status menu is displayed.»
2 Select [Time Disp.], and then press .
The display options vary from disc type.»
3 Select an option, and then press OK.
EN