Philips 157255 User manual

◗Ordering Information
Ordering Code C200S66/ALTO C HPS
A SI Designation S66
Product umber 157255
Description High Pressure Sodium
TCLP*Compliant
on-Cycling
Package Quantity 12
◗Physical Characteristics
Bulb Size ED-18
Bulb Finish Clear
Base Mogul Screw
Max. Overall Length (MOL) 9.75" (248mm)
Light Center Length (LCL) 5.75" (146mm)
Arc Length 2.6" (66mm)
Arc Tube Length 3.5" (91mm)
Arc Tube Material Aluminum Oxide
Operating Position Universal
Maximum Permissible Bulb Temperature 400ºC (752°F)
Maximum Permissible Base Temperature 210ºC (410°F)
Maximum Bulb to Base Eccentricity 3°
Maximum Arc Tube to Base Eccentricity 3°
◗Operating Characteristics (Photometric)
Approximate Initial Lumens122,000
Approximate Mean Lumen219,800
Rated Average Life, Hours330,000
Correlated Color Temperature (CCT) 2100 K
CIE Chromaticity Approximate x-.530, y-.405
Color Rendering Index (CRI) 22
Efficacy (LPW) 110
◗Operating Position
Universal
◗TCLP*Characteristics
Toxicity Characteristic Leaching Procedure (Federal TCLP) Results
Hg Pb
EPA Limit (mg/l) Max 0.200 5.00
C200S66/ALTO C HPS 0.074 0.0
Mercury (mg/lamps) Max 6.6
Ceramalux®High Pressure Sodium on-Cycling
200 Watt ED-18 (Clear) Lamp
featuring ALTO®Lamp Technology
53/4"
93/4"
Approximate Lumen Maintenance
Approximate Survival Curve
20 40 60 80 100 0
0Percent of Rated Average Life
6,000 12,000 18,000 24,000 30,000 0Operating Hours
Percent of Rated Average Life
Operating Hours
60
80
70
90
100
%
Percent – Approx. Initial Lumens
20 40 60 80 100 0
0
6,000 12,000 18,000 24,000 30,000
0
60
80
70
90
100
%
Percent – Approx. Survival

Ceramalux®High Pressure Sodium on-Cycling 200 Watt ED-18 (Clear) Lamp featuring ALTO®Lamp Technology
Electrical Data (Subject to change without notice)
LampWatts(Nominal)..................................200
Lamp Operating Voltage (rms) (Nominal). . . . . . . . . . . . . . . . . . 100V
Initial Lamp Voltage Range (rms) . . . . . . . . . . . . . . . . . . . . . . . . . . 85–115V
Lamp Operating Current (Amps) (rms) (Nominal). . . . . . . . . . 2.4
aximum Lamp Starting Current (Amps)(rms) . . . . . . . . . . . . . 3.6
Lamp Current Crest Factor ( aximum) . . . . . . . . . . . . . . . . . . . 1.8
Warm-up Time to 80% of Output . . . . . . . . . . . . . . . . . . . . . . . . 5 inutes
Re-strike Time for Hot Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 inutes
BallastType............................................ANSIS66
Ballast Open Circuit Voltage ( inimum): . . . . . . . . . . . . . . . . . . 198 Vrms
PulsePeakVolts .......................................2225
Pulse Width @ 90% Peak. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1µs inimum at 2250 Volts
Pulse Frequency ( inimum)
LagBallast .........................................1perCycle
LeadCircuitBallast..................................1perCycle
inimum Operating Temperature. . . . . . . . . . . . . . . . . . . . . . . . . -30°C
Reference Ballast Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.6Ω(ohms) minimum at 220V
aximumLampWatts..................................260
inimumLampWatts ..................................140
aximum Voltage Increase by Fixture . . . . . . . . . . . . . . . . . . . . . 10V
Footnotes:
1) easured at 100 hours of life in vertical and horizontal positions.
2) Approximate mean lumen output at 40% of lamp rated average life. easured in vertical and horizontal operating positions.
3) Rated average life is the life obtained, on the average, from large representative groups of lamps in laboratory tests under controlled conditions at 10 or more operating hours per start.
It is based on survival of at least 65% of the lamps and allows for individual lamps or groups of lamps to vary considerably from the average.
*The TCLP is the US EPA’s Toxicity Characteristic Leaching Procedure
Philips Lighting Company
200 Franklin Square Drive
P.O. Box 6800
Somerset, NJ 08875-6800
1-800-555-0050
ADivision of Philips Electronics orth America Corporation
Updated 1/07 TDS-157255
Philips Lighting
281 Hillmount oad
Markham, Ontario
Canada L6C 2S3
1-800-555-0050
A Division of Philips Electronics Ltd.
www.philips.com
WA NINGS, CAUTIONS AND OPE ATING INST UCTIONS
for Ceramalux High Pressure Sodium Lamps
“WA NING: These lamps must be operated in fixtures designed for use with
High Pressure Sodium lamps.The fixture wattage rating must match the wattage
indicated on the outer glass bulb. Do not scratch the outer bulb or subject it to pressure
as this could cause the outer bulb to crack or shatter. A partial vacuum in the outer bulb
may cause glass to fly if the glass is struck. Operating the lamp improperly may result in
PE SONAL INJU Y, P OPE TY DAMAGE, BU NS AND FI E.
1) If the outer glass bulb is broken, shut off power immediately and remove the lamp
after it has cooled.
2) Use only auxiliary equipment meeting Philips and/or ANSI standards. Use within
voltage limits recommended by ballast manufacturer.
A. Operate lamp only within specified limits of operation.
B. For total supply load refer to ballast manufacturers electrical data.
3) Protect lamp base, socket and wiring against moisture, corrosive atmospheres and
excessive heat.
4) Replace the lamp if the outer glass bulb has been scratched, cracked or damaged
in any way.
5) If a lamp bulb support is used, be sure to insulate the support electrically so as to
avoid possible decomposition of the bulb glass.
6) Do not use this lamp in a fixture which redirects a substantial portion of the
energy toward the arc tube and its immediate vicinity, as this may lead to very
early lamp failure.
7) Take care in handling and disposing of lamps. If arc tube is broken, avoid skin
contact with any of the contents or fragments.
8) The arc tube of this lamp contains sodium and mercury. Dispose of in accordance
with federal, state and local requirements.