7
English
Caution
-Never use any accessories or parts from other manufacturers or that Philips does not specifically
recommend. If you use such accessories or parts, your warranty becomes invalid.
-Do not remove the coil holder from the spindle as this may cause damage.
-Only use the appliance to heat up or froth milk. Do not use it to process any other ingredients.
-Do not exceed the maximum level indicated in the milk frother. If you overfill the milk frother, hot
milk may escape from under the lid and cause scalding.
-The bottom of the jug is hot if you pour out milk immediately after heating up or frothing.
-Do not move the appliance while it is operating, to prevent hot milk from escaping from under the
lid.
-Correct cleaning of the milk frother is very important for reliable performance and good frothing
results.
-Always return the appliance to a service center authorized by Philips for examination or repair. Do
not attempt to repair the appliance yourself, otherwise the warranty becomes invalid.
-Always place the base and the milk jug on a dry, flat and stable surface.
-Do not place the appliance on a hot surface and prevent the mains cord from coming into contact
with hot surfaces.
-Never let the appliance operate unattended.
-Make sure that the milk frother is switched off before you remove the milk jug from the base.
-Do not use the machine in combination with a transformer, as this could cause hazardous
situations.
-Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance. Simply use a soft cloth dampened with water.
-This appliance is intended for normal household use only. It is not intended for use in
environments such as staff kitchens of shops, offices, farms or other work environments. Nor is it
intended to be used by clients in hotels, motels, bed and breakfasts and other residential
environments.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.
Using the appliance
1Insert the plug into a wall socket.
2Remove the milk frother lid from the milk frother (Fig. 2).
3Fill the milk frother with milk to the desired level (Fig. 3).
4Place the whisk onto the whisk holder. Attach the shaft of the whisk holder to the milk frother lid
and place it back on the milk frother (Fig. 4).
5Press the button for 1 second for heating and frothing milk. (Fig. 5) Press the button for 3 seconds
for frothing cold milk. (Fig. 6)
6Remove the whisk for cleaning after frothing.
Cleaning and maintenance
1Rinse the inside of the milk frother under hot running water (Fig. 7).
2Remove the whisk holder from the milk frother lid. (Fig. 8)
