Philips TL 20W User manual

1
Fluorescent lamps TL Standard colours
C
∅40.5 max.
B
A
Type A B B C
max. min. max. max.
TL 20W 589.8 594.5 596.9 604.0
TL 40W 1199.4 1204.1 1206.5 1213.6
TL 65W 1500.0 1504.7 1507.1 1514.2
Commercial Type Cap/ Lamp Lamp Colour Correlated Lumen Average Nett EOC
name base voltage current designation colour output luminance weight
temperature
VA Klmcd/cm2g
/33
TL TL 20W /33 G13 57 0.37 COOL WHITE 4100 1100 0.59 156 717207
TL TL 40W /33 G13 107 0.43 COOL WHITE 4100 2850 0.73 292 717870
TL TL 65W /33 G13 110 0.67 COOL WHITE 4100 4650 0.94 360 719119
/54
TL TL 20W /54 G13 57 0.37 COOL DAYLIGHT 6200 1000 0.53 156 717382
TL TL 40W /54 G13 107 0.43 COOL DAYLIGHT 6200 2500 0.64 292 718594
TL TL 65W /54 G13 110 0.67 COOL DAYLIGHT 6200 4100 0.83 360 719201
TL Standard colours are mostly
used in applications where colour
rendering is not an important
factor.
The colour designation of TL
lamps creates a certain
atmosphere. It varies from warm
white to cool daylight.The colour
designation is determined by the
colour temperature of the lamp.
Fluorescent lighting is efficient and
economical.The efficacy
(lumen/watt) of all fluorescent
lamps is high compared to most
other light sources.
Different luminaires are available
for various purposes.
TL lamps are low-pressure
mercury discharge lamps with a
clear tubular 38 mm envelope.
The tube wall is internally
covered with a mixture of
fluorescent powders.
TL Standard colours have a
moderate colour rendering index
(CRI 50-70). Especially the red
part of the spectral power
distribution is moderately covered
by Standard colours.
Dimensions in mm

2
Fluorescent lamps TL Standard colours
400 500 600 700
500
400
300
200
100
0
TL /33 Ra= 63
Wavelength in nm
µW per 5 nm per lumen
400 500 600 700
500
400
300
200
100
0
TL /54 Ra= 72
Wavelength in nm
µW per 5 nm per lumen
Spectral power distributions
Lumen maintenance
Life expectancy
Life expectancy
Life expectancy
50
60
70
80
90
100
Survivals in %
Operating hours
capacitive
inductive
05000 10000 15000 20000
(inductive/capacitive)
TL Standard colours on conventional gear
50
60
70
80
90
100
Lumen in %
Operating hours
05000 10000 15000 20000
Typical values:
5.000 hrs:81%
10.000 hrs:73%
15.000 hrs:69%
TL Standard colours on conventional gear
capacitive inductive
50% inductive
50% capacitive
50
60
70
80
90
100
Survivals in %
Operating hours
05000 10000 15000 20000
Typical values:
5.000 hrs:95%
10.000 hrs:70%
15.000 hrs:n.a.
(50% inductive/50% capacitive)
TL Standard colours on conventional gear
50
60
70
80
90
100
Survivals in %
Operating hours
05000 10000 15000 20000
Typical values:
5.000 hrs:99%
10.000 hrs:90%
15.000 hrs:n.a.
TL Standard colours on conventional gear (inductive)