Philips SC5371 User manual

SC5371
EN User manual
FR Guide d’utilisation
ES Manual del usuario
4222_100_7390_2_DFU_Booklet_v2.indd 1 19/12/17 14:48

1
2
4
3
5
67
8
911
10
12
13
16
14
17
15
1
4222_100_7390_2_DFU_Booklet_v2.indd 2 19/12/17 14:48

3
IMPORTANT
SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children
are present, basic safety precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER
To reduce the risk of electrocution:
1. Always unplug the charging stand immediately after
use, except when facial brush is (re)charging.
2. Do not place or store the charging stand where it
can fall or be pulled into a tub or sink.
3. Do not place charging stand in or drop into water or
other liquid.
4. Do not reach for a charging stand that has fallen into
water. Unplug immediately.
5. Unplug and remove power supply cord from
charging stand before cleaning.
6. The batteries used in this device may present a
re or chemical burn hazard if mistreated. Do not
disassemble, heat above 100°C (212°F) or
incinerate.
7. Keep the adapter dry (Fig. 2).
ENGLISH
4222_100_7390_2_DFU_Booklet_v2.indd 3 19/12/17 14:48

4
WARNING
To reduce the risk of burns, electrocution, re,
or injury to persons:
1. Charging stand should never be left unattended
when plugged in.
2. Close supervision is necessary when this facial brush/
charging stand is used by, on, or near children or
invalids.
3. Use this facial brush/charging stand only for its
intended household use as described in this manual.
Do not use attachments not recommended by
Philips North America LLC or Philips Electronics Ltd.
4. Never operate this facial brush /charging stand if
it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or
dropped into water while plugged in. For assistance,
call 1-800-243-7884 (in US only) or 1-866-800-9311
(in Canada only).
5. Keep the facial brush, charging stand, cord, plug and
any attachments away from heated surfaces.
6. Never use while sleeping or drowsy.
7. Never drop or insert any object into any opening.
8. Do not use the adapter in or near a power outlet
that contains an electric air freshener to prevent
damage to the adapter.
9. Do not operate or plug in charging stand outdoors
or where aerosol (spray) products are being used or
where oxygen is being administered.
4222_100_7390_2_DFU_Booklet_v2.indd 4 19/12/17 14:48

5
10. Do not use this facial brush with a damaged or
broken brush. Replace brush head immediately.
11. Use only the cord and charging stand provided to
charge and (re)charge the facial brush.
12. Always attach plug to charging stand rst, then to
outlet.To disconnect, turn the facial brush ‘OFF’, then
remove plug from outlet.
13. To prevent possible damage to the cord, do not
wrap cord around the charging stand. Do not use an
extension cord.
14. Never put facial brush or charging stand in direct
sunlight or charge, use and store at a temperature
below 50°F (10°C) and above 140°F (60°C).
15. A facial brush should never be left unattended while
plugged in.
16. Do not insert metal-containing material into the
socket for the facial brush plug.
17. Only use the power plug and other accessories
supplied with the facial brush.
SAVETHESE
INSTRUCTIONS
IMPORTANT: The power plug contains a
transformer. Do not cut off the power plug to
replace it with another plug as this will cause a
hazardous condition.
ENGLISH
4222_100_7390_2_DFU_Booklet_v2.indd 5 19/12/17 14:48

6
1 Introduction
Thank you for choosing PhilipsVisaPure Advanced.
Cleansing is an essential part of the daily skincare
routine, but traditional methods do not always leave
your skin as clean and radiant as it could be. That’s why
we developedVisaPure Advanced - our exciting new
approach to facial cleansing withVisaPure Advanced,
you can enjoy healthy-looking, radiant skin, quickly and
easily every day.VisaPure Advanced combines gentle
rotations and sonic pulses that cleanse deeply, remove
impurities and makeup, leaving skin feeling soft and fresh.
Designed to complement your current routine, you
can useVisaPure Advanced together with your current
cleanser and it can also help your favorite moisturizer
absorb better into your skin.A Deep Pore brush head,
a Precision brush head and a Revitalizing Massage head
are included for all skin types.Additional brush heads for
different skin types are available separately. Use VisaPure
Advanced twice daily to enjoy healthy-looking, soft skin
and reveal your natural radiance.
4222_100_7390_2_DFU_Booklet_v2.indd 6 19/12/17 14:48

7
2 General description
(g. 1)
1 Handle
2 Charging light and battery low indicator
3 Speed indicator
• Speed one: gentle cleansing
• Speed two: deep cleansing
4 On/off button
5 Connection pin
6 Charging pins
7 Anti-roll ridge
8 Deep Pore brush head
9 Protective cap
10 Revitalizing Massage head
11 Precision Brush head
12 Socket for the appliance plug
13 Charging stand
14 Adapter
15 Appliance plug
16 Storage caddy
17 Travel pouch
This symbol on the appliance
indicates that the facial brush can be
used in both the bath and shower.
ENGLISH
4222_100_7390_2_DFU_Booklet_v2.indd 7 19/12/17 14:48

8
3 IMPORTANT
INFORMATION
•Fully charge the facial brush before using and at least
every 3 months to sustain battery life.
3.1 CAUTION
•Only use this facial brush on the face, neck and low
neckline, excluding the sensitive area around the eyes.
Do not use this facial brush for any other purpose.
•Do not use the facial brush more than twice a day.
•For hygienic reasons, it is recommended the facial
brush be used by only one person.
•Do not use this facial brush if you have dry, chapped
or sunburned skin, open wounds, suffer from skin
diseases or skin irritations or if you are taking steroid-
based medication.
•Do not use this facial brush with self-made cleansers
or cleansers containing harsh chemicals or rough
particles.
•Do not clean the facial brush and accessories in a
dishwasher.
3.2 General
•If you have sensitive skin select setting 1 the rst few
times you use the facial brush.
•Facial skin can get dryer during colder months so you
may want to reduce the frequency, depending on the
condition of your skin.
4222_100_7390_2_DFU_Booklet_v2.indd 8 19/12/17 14:48

9
•Using the facial brush to remove makeup may
discolor or stain the bristles.
•Clean the facial brush and the accessories after each
use.
•An adapter plug may be necessary for charging plug
usage in some foreign countries. Use an attachment
plug adapter of the proper conguration for the
power outlet. The charging plug will automatically
convert to work on 100V to 240V AC systems.
•To charge the battery, only use the detachable supply
unit (SSW-2082 or SSW-2600) provided with the
appliance (Fig. 3).
4 Preparing for use
4.1 Charging the facial brush
Charging the facial brush takes approximately 6 hours.
A fully charged facial brush has a cordless operating time
of up to 30 minutes.
1 Make sure the facial brush is switched off.
2 Insert the facial brush plug in the socket of the
charging stand (1), put the adapter in the wall socket
(2), remove the protection cap (3) and put the facial
brush in the charging stand (4) (g. 4).
ENGLISH
4222_100_7390_2_DFU_Booklet_v2.indd 9 19/12/17 14:48

10
Make sure the charging pins on the facial brush are
connected properly with the contact points in the
charging stand.
3 The charging light blinks white to indicate that
the facial brush is charging.When the battery is
fully charged, the charging light lights up white
continuously (g. 3).
4.2 Battery-low indicator
•When the battery is almost empty, the charging light
blinks amber for 15 seconds.The battery still contains
enough energy for a complete treatment (g. 6).
To charge the facial brush, follow the steps in
section ‘Charging the facial brush’.
5 Using the facial brush
Make sure the facial brush is fully charged before you use
it for the rst time.
Caution:Wear a headband or tie all your hair securely
away from your face to ensure no loose hair gets caught
in the brush head during use.
4222_100_7390_2_DFU_Booklet_v2.indd 10 19/12/17 14:48

11
DNote:
You can use the facial brush in front of the sink, in the
shower or bathtub.
5.1 Brush heads
•Deep pore brush head prevents and reduces the
appearance of pores. Use daily.
•Precision Brush head for precision cleansing of hard
to reach areas such as the nose area.
•Revitalizing Massage head for a relaxing and
revitalizing massage.
•Normal brush head for all skin types. Use daily.
Sold separately.
•Exfoliation brush for all skin types. Use weekly.
Sold separately.
•Sensitive brush head for normal to sensitive skin.
Use daily. Sold separately.
•Fresh Eyes head for a boost of freshness to tired
eyes. Sold separately.
5.2 Daily facial cleansing
5.2.1 Intelligent Head Recognition
VisaPure Advanced has Intelligent Head Recognition.
•The Precision brush head and the Revitalizing
Massage head have specic levels of rotation and
vibration.
ENGLISH
4222_100_7390_2_DFU_Booklet_v2.indd 11 19/12/17 14:48

12
•When you attach a different intelligent attachment
and switch on the appliance, it recognizes the
intelligent attachment.
•You will hear a beep and the intensity setting
indications ash alternately.
•The appliance then activates a customized program
for the intelligent attachment in use.
5.2.2 Intensity settings
You can choose between 2 different intensity settings
depending on your personal preference.
•Intensity setting 1 for a gentle treatment.
•Intensity setting 2 for an intensive treatment.
The rst time you use the facial brush, we advise you to select
intensity setting 1. If you do not experience any skin reactions,
you can start using the appliance at intensity setting 2.
DNote:
Your skin might need to adapt to the new treatment
just like it does with a new skincare product.
5.2.3 Skin zones
•The face can be divided into three zones: right cheek,
left cheek and T-zone. The cheek zones include the
chin, the area between nose and upper lip and the
area between eyes and ears.The neck and lower
neck can also be divided into three zones (g. 7).
DNote:
Do not use the facial brush on the sensitive skin area
around the eyes.
4222_100_7390_2_DFU_Booklet_v2.indd 12 19/12/17 14:48

13
5.2.5 Skin zone timer
When you switch on the facial brush, it works for three
periods of 20 seconds. Between these periods, there is
a short pause to indicate you should move the brush
head to another skin zone.
5.2.6 Auto shut-off
The facial brush automatically switches off after one
minute to prevent overtreatment.
5.3 Using the Deep Pore brush head
DNote:
You can use the Deep Pore brush head twice a day.
1 Push the brush head onto the connection pin until it
locks into position with a click (g. 8).
2 Moisten your skin and the brush head with water.
Apply the liquid cleanser to your face or the brush
head directly. Do not use the facial brush with a dry
brush head, as this can irritate the skin.
3 Place the brush head on your skin.
4 Press the on/off button once to switch on the facial
brush. Press two times to switch off the facial brush
or wait until it stops automatically after one minute
(g. 9).
5 Gently move the brush head across your skin while
making horizontal movements. Do not press the
brush head too hard onto the skin to make sure the
treatment remains comfortable (g. 10).
ENGLISH
4222_100_7390_2_DFU_Booklet_v2.indd 13 19/12/17 14:48

1414
6 After 20 seconds, the facial brush briey pauses to let
you know that you have to move to another zone.
Do not overdo the cleansing and do not cleanse any
zone longer than 20 seconds.
5.4. Revitalizing Massage head
The Revitalizing Massage head is suitable for all skin types.
We advise you to use it 2-3 times a week. Before you
massage the skin, rst cleanse your face with VisaPure
Advanced.
5.4.1The 3 minute Revitalizing Massage program
The 3 minute Revitalizing Massage program consists of
2 treatment periods of 1 1/2 minutes each.The
Revitalizing Massage head is intended to treat
the right and left cheek. The cheek zones include the chin,
the area between the nose and upper lip and
the areas between the eyes and ears.
DNote:
Each treatment period has a specic rotation direction
optimized for the skin zone treated. Do not use the
Revitalizing Massage head on the sensitive area around
the eyes.
4222_100_7390_2_DFU_Booklet_v2.indd 14 19/12/17 14:48

15
ENGLISH
5.4.2 Using the Revitalizing Massage head
Use the Revitalizing Massage head on clean, dry skin or
after applying facial cream or oil to your skin.
1 Push the Revitalizing Massage head onto the
connection pin until it locks into position with a click
(Fig. 11).
2 Press the on/off button to switch on the appliance
and choose your preferred setting.
DNote:
When you attach a different head the appliance
recognizes it. You will hear a beep and the intensity
setting indications ash alternately (Fig. 12).
3 Place the Revitalizing Massage head on your right
cheek. Gently move the head across your skin, from
the nose towards the ear and repeat this movement
(Fig. 13).
DNote:
Do not push the head too hard onto the skin to
make sure the treatment remains comfortable.
4 After 1 1/2 minutes, the appliance pauses briey to
let you know you should move it to the other cheek
(Fig. 14).
5 When the program is nished, turn the appliance off.
4222_100_7390_2_DFU_Booklet_v2.indd 15 19/12/17 14:48

1616
2 Use the Precision Brush head to clean hard-to-reach
areas such as around your nose, mouth and chin area.
3 Finish with a massage treatment using the Revitalizing
Massage attachment.
5.5.1The 30-second Precision Brush program
With the Intelligent brush head recognition, the VisaPure
Advanced handle recognizes the intelligent brush head
and will run a customized program. The program consists
of 2 treatment periods of 15 seconds each. Start on the
right side of your nose or mouth.When the appliance
pauses after 15 seconds, move to the left side of your
nose or mouth (Fig. 15).
5.5 Precision Brush head
The Precision Brush head is suitable for all skin types.We
advise you to use it once a day. If you use the brush head
more than once a day, make sure it is dry before using
it again.When using the Precision Brush head, the ideal
sequence consists of the following steps:
Caution:Take off your glasses and remove any nose or lip
piercings before you use the Precision Brush around your
nose, lips or chin.
1 Remove make up. Use the Deep Pore brush head to
cleanse your cheeks and forehead, but not the nose
or area around the mouth.
4222_100_7390_2_DFU_Booklet_v2.indd 16 19/12/17 14:48

17
ENGLISH
3 Moisten the brush head and your face with water.
Do not use a dry Precision Brush head as this
can irritate the skin. If preferred, you can put a bit
of cleanser onto the brush head. Gently rub the
cleanser in-between the bristles so it stays on the
brush head. Do not apply too much cleanser onto
the brush head to prevent cleanser from splashing
when the treatment starts.
4 Press the on/off button to switch the appliance on
and choose your preferred setting.
DNote:
When you attach a different brush head, the
appliance recognizes it. You will hear a beep and the
intensity setting indications ash alternately.
DNote:
It is normal for your nose to feel slightly tender after
the rst treatment. If preferred reduce the treatment
intensity and duration.
5.5.2 Using the Precision Brush head
Make sure you only use the Precision Brush head on wet
skin or in combination with a facial cleanser.
1 First cleanse your face with a cleansing brush. Only
cleanse the cheeks and the forehead.You can leave
the cleanser and water on your face, while you
switch heads to the Precision Brush head.
2 Push the Precision Brush head onto the connection
pin until it locks into position with a click (Fig. 16).
4222_100_7390_2_DFU_Booklet_v2.indd 17 19/12/17 14:48

181818
5 Place the Precision Brush head on the right side
of your nose. Gently move the brush head up and
down across the right side of your nose, and if
preferred, also in the mouth area (Fig. 17).
DNote:
Do not push the brush head too hard onto the
skin, to make sure that the treatment remains
comfortable.
Important: Do not use the Precision Brush head on
dry skin, open wounds, around the eyes, on the lips,
on or inside the ears or inside the nose.
6 After 15 seconds, the appliance pauses briey to let
you know you have to move it to the other side of
your nose (Fig. 18).
7 When the program is nished, turn the appliance off.
8 After the treatment, rinse and dry your face.
6 Cleaning and
maintenance
• Always turn the facial brush OFF and remove from
charging stand before cleaning.
4222_100_7390_2_DFU_Booklet_v2.indd 18 19/12/17 14:48

1919
ENGLISH
• Do not use scouring pads, abrasive cleaning agents or
aggressive liquids such as alcohol or acetone to clean
the facial brush and accessories.
6.1 Cleaning the facial brush,
Deep Pore brush head and
charging stand
• For best results, clean the facial brush and brush
heads with warm water after each use.
• Always remove the facial brush from the charging
stand before cleaning.
• Never remove or replace brushes while the facial
brush is turned on.
• Do not apply pressure or hard objects to brush
heads as this may damage the brush heads and
reduce cleansing effectiveness.
• Do not put the facial brush, brush heads or
attachments in a dishwasher.
• Clean the charging stand and storage caddy with a
soft, moist cloth. Allow to air dry thoroughly before
attaching power cord.
• Always keep the power cord and adapter dry.
Never rinse it under the tap or immerse in water.
1 Rinse the handle and brush head under the tap
thoroughly with warm water (max 104°F/40°C)
(g. 19).
2 Remove the brush head from the handle and clean
the back of the brush head and the connection pin
of the facial brush under the tap (g. 20).
3 Dry the facial brush and brush head with a soft towel
being careful not to bend the brush bristles.
4222_100_7390_2_DFU_Booklet_v2.indd 19 19/12/17 14:48

2020
6.3 Cleaning the Precision Brush head
1 Thoroughly clean the Precision Brush head with
warm water and mild soap after each use. Shake off
excess water.
2 Remove the Precision Brush head from the handle
and clean the back of head and the connection pin of
the appliance under the tap.
3 Dry the Precision Brush head with a soft towel or
allow to air dry thoroughly.
4 You may let the brush head dry on the appliance in
the charging stand (without the protection cap),
or on the storage caddy.
4 Unplug and remove cord from the outlet and
charging stand (g. 21).
5 Clean the charging stand and storage caddy with a
soft, moist cloth (g. 22). Allow to air dry thoroughly
before attaching power cord.
6.2 Cleaning the Revitalizing Massage head
1 Thoroughly clean the Revitalizing Massage head with
warm water and mild soap after each use. Shake off
excess water.
2 Remove the Revitalizing Massage head from
the handle and clean the back of head and the
connection pin of the product under the tap.
3 Dry the Revitalizing Massage head with a soft towel
or allow to air dry thoroughly.
4222_100_7390_2_DFU_Booklet_v2.indd 20 19/12/17 14:48