Philips PET717/94 User manual

PET717_94_QSG_V2.0
Philips Portable DVD Player PET717
Quick Start Guide
1Charge the built-in battery
Step 1 Switch the POWER ON / OFF/CHR slide selector to the
OFF/CHR position.
Step 2 Connect the supplied AC adaptor to the DC IN 12V socket
on the DVD Player and to the AC outlet.
The red charge indicator turns on. It takes about 4 hours to fully

charge the battery.
When the battery is fully charged, the red charge indicator turns off.

Tip
- You can only charge the battery when the temperature is
between 0°C and 35°C.
- When headphones are connected to the DVD Player, the fully
charged battery lasts about 2.5 hours.
2Install remote control battery
Step 1 Open the battery compartment.
Step 2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
Step 3 Close the battery compartment.
CR2025
1
CR2025
2
3Play discs
Step 1 Lift the display panel.
Step 2 Switch the OPEN slide selector to the right to open the disc
compartment.
• (For the first time) Remove the protective card.
Step 3 Insert a disc with the printed side facing up.
Step 4 Push the lid down to close the disc compartment.
Disc starts to play automatically. If not, press
OK or 2; .
If a menu appears, select an item and then press
OK to start play.
4Connect a TV
On the DVD Player,
Step 1 Connect the black end of the supplied AV cable to the AV
OUT socket.
On the TV,
Step 1 Connect the white end to the left audio input socket and the
red end to the right audio input socket.
Step 2 Connect the yellow end to the video input socket.
TV
I I

VIE I

PET717_94_QSG_EN_V2.0.indd 1PET717_94_QSG_EN_V2.0.indd 1 2010-4-28 11:13:132010-4-28 11:13:13