Phoenix Contact RAD-900-IFS User manual

1Description
900 MHz wireless transceiver (transmitter and
receiver) with RS-232 and RS-485 interface, can be
extended with I/O extension modules
RAD-900-IFS
© PHOENIX CONTACT
Data sheet
Wireless communication is based on Trusted Wireless 2.0
technology. The high demand for a interference-free data
transmission using the license-free 900 MHz band, in
particular via the use of the FHSS method (FHSS) and 128-
bit data encryption (AES), is fulfilled.
In addition to an RS-232 and RS-485 2-wire interface, the
RAD-900-IFS wireless module supports the option of
directly connecting up to 32 I/O extension modules in the
station structure via the TBUS DIN rail connector.
Addressing of the wireless module and I/O mapping of the
I/O extension modules is carried out quickly and easily by
means of the thumbwheel on the front. Programming
knowledge is not required.
The PSI-CONF configuration and diagnostics software for
special functionality and diagnostic options in the wireless
module is available free of charge.
Features
– Flexible network applications: I/O data, serial data,
PLC/Modbus RTU mode
– Adjustable data rates for the wireless interface
– Easy point-to-point or network structures (star,
repeater)
– Quick and easy startup thanks to simple wireless
module addressing using the thumbwheel on the front
– Integrated RS-232 and RS-485 interface
– Can be extended with up to 32I/O modules per station
via DIN rail connector (hot-swappable)
– 128-bit data encryption (AES)
– Unique network addressing via plug-in configuration
memory (RAD-CONF) for secure, parallel operation of
multiple networks (different RF bands)
– Data rates and ranges can be adjusted
This product is only for export outside of the European Economic area.
Make sure you always use the latest documentation.
It can be downloaded from the product at phoenixcontact.net/products.
This data sheet is valid for all products listed on the following page:
3225_en_H 2018-09-14

RAD-900-IFS
3225_en_H PHOENIX CONTACT 2/22
2Tableofcontents
1 Description .............................................................................................................................. 1
2 Table of contents ..................................................................................................................... 2
3 Ordering data .......................................................................................................................... 3
4 Technical data ......................................................................................................................... 6
5 Safety regulations and installation notes.................................................................................. 9
5.1 Installation notes ................................................................................................................. 9
5.2 Installation and operation....................................................................................................... 9
5.3 Safety regulations for installation in potentially explosive areas ..................................................... 10
5.4 Conformance.................................................................................................................... 10
6 Installation ............................................................................................................................. 12
6.1 Structure ......................................................................................................................... 12
6.2 Basic circuit diagram .......................................................................................................... 12
6.3 Display and diagnostic elements ........................................................................................... 13
6.4 Assembly/removal ............................................................................................................. 15
6.5 Connecting the cables ........................................................................................................ 16
6.6 Serial pin assignment ......................................................................................................... 16
7 Startup and configuration ......................................................................................................18
7.1 Resetting to the default settings............................................................................................. 18
7.2 Setting the station address (RAD-ID) ...................................................................................... 18
7.3 I/O data transmission.......................................................................................................... 18
7.4 Serial data transmission ...................................................................................................... 19
7.5 PLC/Modbus RTU mode ..................................................................................................... 19
7.6 Behavior of the input and output modules in the event of an interrupted wireless connection ................ 19
7.7 Saving the wireless network ................................................................................................. 20
7.8 Copying device settings to new network devices ....................................................................... 20
7.9 PSI-CONF configuration and diagnostics software..................................................................... 21
8 Application examples ............................................................................................................ 21

RAD-900-IFS
3225_en_H PHOENIX CONTACT 3/22
Description Ty p e Order No. Pcs./Pkt.
Radioline - 900MHz wireless transceiver with RS-
232/485 interface, can be extended with I/O modules,
RSMA (female) antenna connection, point-to-point, star,
and mesh networks up to 250stations, range of up to
32km (line of sight), use in North America
RAD-900-IFS 2901540 1
3Orderingdata
Accessories Ty p e Order No. Pcs./Pkt.
Radioline - I/O extension module, 2digital inputs and
outputs (0...250VAC/DC) and 1analog input
(0/4...20mA) and output (0/4...20mA, 0...10V)
RAD-DAIO6-IFS 2901533 1
Radioline - I/O extension module, 4digital inputs
(0...250VAC/DC)
RAD-DI4-IFS 2901535 1
Radioline - I/O extension module, 4digital relay outputs
(5A, 250VAC/24VDC)
RAD-DOR4-IFS 2901536 1
Radioline - I/O extension module, 8digital inputs
(0...30.5VDC) or 2pulse inputs up to 100Hz
RAD-DI8-IFS 2901539 1
Radioline - I/O extension module, 8digital transistor
outputs (30.5VDC/200mA)
RAD-DO8-IFS 2902811 1
Radioline - I/O extension module, 4analog current inputs
(0/4mA...20mA)
RAD-AI4-IFS 2901537 1
Radioline - I/O extension module, 4analog current or
voltage outputs (0/4mA...20mA, 0V...10V)
RAD-AO4-IFS 2901538 1
Radioline - RS-485 multipoint multiplexer, can be
extended with I/O modules, can be used as Modbus/RTU
bus coupler or can be combined with Radioline wireless
system, up to 99stations, range of up to 1.2km on in-
house copper cables
RAD-RS485-IFS 2702184 1
DIN rail connector for DIN rail mounting. Universal for
TBUS housing. Gold-plated contacts, 5-pos. DIN rail
connector, nominal current: 8 A, number of positions: 5,
pitch: 3.81 mm, Articles with gold-plated contacts, bus
connectors for connecting with electronic housings
ME 17,5 TBUS 1,5/ 5-ST-3,81
GN
2709561 10
Radioline - memory stick for saving custom configuration
data
RAD-MEMORY 2902828 1
Radioline - USB data cable for communication between
the PC and Radioline devices, energy supply for
diagnostics and configuration via the USB port of the PC,
cable length: 2m / 6.5ft
RAD-CABLE-USB 2903447 1
Antenna cable, outside diameter: 5mm (0.2in.), inner
conductor: solid, attenuation: 0.4 / 0.5 / 0.6dB at 0.9 / 2.4
/ 5.8GHz, connection: N (male) -> RSMA (male), cable
length: 0.5m (1.6ft.)
RAD-PIG-RSMA/N-0.5 2903263 1

RAD-900-IFS
3225_en_H PHOENIX CONTACT 4/22
Antenna cable, outside diameter: 5mm (0.2in.), inner
conductor: solid, attenuation: 0.5 / 0.8 / 1.1dB at 0.9 / 2.4
/ 5.8GHz, connection: N (male) -> RSMA (male), cable
length: 1m (3.3ft.)
RAD-PIG-RSMA/N-1 2903264 1
Antenna cable, outside diameter: 5mm (0.2in.), inner
conductor: solid, attenuation: 0.9 / 1.3 / 2.0dB at 0.9 / 2.4
/ 5.8GHz, connection: N (male) -> RSMA (male), cable
length: 2m (6.5ft.)
RAD-PIG-RSMA/N-2 2903265 1
Antenna cable, outside diameter: 5mm (0.2in.), inner
conductor: solid, attenuation: 1.2 / 2.0 / 3.0dB at 0.9 / 2.4
/ 5.8GHz, connection: N (male) -> RSMA (male), cable
length: 3m (10ft.)
RAD-PIG-RSMA/N-3 2903266 1
Antenna adapter for control cabinet feed-through,
frequency range: 0.3GHz...6GHz, degree of protection:
IP65, connection: 2 x N (female)
RAD-ADP-N/F-N/F 2867843 1
Vulcanizing sealing tape for external protection of
adapters, cable connections, etc. against the effects of
weather, roll length: 3 m
RAD-TAPE-SV-19-3 2903182 1
Primary-switched MINI POWER supply for DIN rail
mounting, input: 1-phase, output: 24 V DC/1.5 A Primary-
switched power supply unit, MINI POWER, Pluggable
screw connection, output: 24 V DC / 1.5 A
MINI-SYS-PS-100-
240AC/24DC/1.5
2866983 1
Attachment plug with surge protection for coaxial signal
interfaces. Connection: N connector, female/female
CN-UB-70DC-6-BB 2803166 1
Attachment plug with Lambda/4 technology as surge
protection for coaxial signal interfaces. Connection: N
connectors socket-socket
CN-LAMBDA/4-2.2-BB 2800024 1
Antenna cable, outside diameter: 6mm (0.24in.), inner
conductor: solid, attenuation: 1.0 / 1.5 / 2.1dB at 0.9 / 2.4
/ 5.8GHz, connection: 2x N (male), cable length: 3m
(10ft.)
RAD-CAB-PFP240-10 5606124 1
Antenna cable, outside diameter: 10mm (0.4in.), inner
conductor: solid, attenuation: 1.0 / 1.5 / 2.2dB at 0.9 / 2.4
/ 5.8GHz, connection: 2x N (male), cable length: 6m
(20ft.)
RAD-CAB-PFP400-20 5606125 1
Antenna cable, outside diameter: 13mm (0.51in.), inner
conductor: solid, attenuation: 1.0 / 1.6 / 2.3dB at 0.9 / 2.4
/ 5.8GHz, connection: 2x N (male), cable length: 7.5m
(25ft.)
RAD-CAB-PFP500-25 5606126 1
Antenna cable, outside diameter: 10mm (0.4in.), inner
conductor: solid, attenuation: 2.9dB at 900MHz,
connection: 2 x N (male), cable length: 12m (40ft.)
RAD-CAB-RG213-40 2867377 1
Antenna cable, outside diameter: 10mm (0.4in.), inner
conductor: solid, attenuation: 3.5dB at 900MHz,
connection: 2 x N (male), cable length: 15m (50ft.)
RAD-CAB-RG213-50 2867225 1
Antenna cable, outside diameter: 10mm (0.4in.), inner
conductor: solid, attenuation: 2.5 / 4.2 / 6.3dB at 0.9 / 2.4
/ 5.8GHz, connection: 2x N (male), cable length: 18m
(60ft.)
RAD-CAB-PFP400-60 2867380 1
Accessories (continued) Ty p e Order No. Pcs./Pkt.

RAD-900-IFS
3225_en_H PHOENIX CONTACT 5/22
Antenna cable, outside diameter: 10mm (0.4in.), inner
conductor: solid, attenuation: 3.3 / 5.6 / 8.4dB at 0.9 / 2.4
/ 5.8GHz, connection: 2x N (male), cable length: 24m
(80ft.)
RAD-CAB-PFP400-80 2867393 1
Antenna cable, outside diameter: 10mm (0.4in.), inner
conductor: solid, attenuation: 4.1 / 6.9 / 10.4dB at 0.9 / 2.4
/ 5.8GHz, connection: 2x N (male), cable length: 30m
(100ft.)
RAD-CAB-PFP400-100 2867238 1
Antenna cable, outside diameter: 15mm (0.6in.), inner
conductor: solid, attenuation: 3.9 / 6.8 / 10.4dB at 0.9 / 2.4
/ 5.8GHz, connection: 2x N (male), cable length: 45m
(150ft.)
RAD-CAB-PFP600-150 2885184 1
Antenna extension cable, length: 200 ft RAD-CAB-PFP900-200 2885197 1
Omnidirectional antenna, 900MHz, gain: 5dBi,
polarization: linear, opening angle: h/v 360°/28°, degree of
protection: IP65, connection: N (female), incl. mounting
bracket and mast clips
RAD-ISM-900-ANT-OMNI-
FG-3-N
2867791 1
Omnidirectional antenna, 900MHz, gain: 7dBi,
polarization: linear, opening angle: h/v 360°/30°, degree of
protection: IP65, connection: N (female), incl. mounting
bracket and mast clips
RAD-ISM-900-ANT-OMNI-5 2867199 1
Directional antenna, 868MHz / 900MHz, gain: 5dBi,
polarization: linear, opening angle: h/v 168°/78°, degree of
protection: IP65, connection: N (female), incl. mounting
bracket and mast clips
RAD-ISM-900-ANT-YAGI-3-N 2867801 1
Omnidirectional antenna, 900MHz, gain: 8dBi,
polarization: linear, opening angle: h/v 360°/15°, degree of
protection: IP65, connection: N (female), incl. mounting
bracket and mast clips
RAD-ISM-900-ANT-OMNI-
FG-6-N
2885579 1
Directional antenna, 868MHz / 900MHz, gain: 8.5dBi,
polarization: linear, opening angle: h/v 100°/62°, degree of
protection: IP65, connection: N (female), incl. mounting
bracket and mast clips
RAD-ISM-900-ANT-YAGI-
6.5-N
2867814 1
Directional antenna 868MHz / 900MHz, gain: 12dBi,
polarization: linear, opening angle: h/v 56°/46°, degree of
protection: IP65, connection: N (female), incl. mounting
bracket and mast clips
RAD-ISM-900-ANT-YAGI-10-
N
5606614 1
Omnidirectional antenna, 900MHz, gain: 2dBi,
polarization: linear, degree of protection: IP65,
connection: RSMA (male), incl. 1.8m / 6ft. connecting
cable and mounting bracket for wall mounting
RAD-900-ANT-OMNI-2-2-
RSMA
2904801 1
Omnidirectional antenna, 868MHz / 900MHz, gain:
2dBi, polarization: linear, opening angle: h/v 360°/50°,
degree of protection: IP66, connection: N (female), for
control cabinet mounting (optional wall mounting)
RAD-900-ANT-OMNI-2-N 2904802 1
Accessories (continued) Ty p e Order No. Pcs./Pkt.

RAD-900-IFS
3225_en_H PHOENIX CONTACT 6/22
Radioline - configuration stick for easy and safe network
addressing for the 900MHz wireless module (RAD-900-
...), unique network ID, RF band1
RAD-900-CONF-RF1 2702122 1
NEMA 4X enclosure for wireless systems RAD-SYS-NEMA4X-900 2917188 1
Antenna adapter, frequency range: 0.3GHz...6GHz,
connection: RSMA (male) -> RSMA (female), 90° angled
RAD-ADP-RSMA/M-RSMA/F-
90
2904790 1
Accessories (continued) Ty p e Order No. Pcs./Pkt.
4 Technical data
Dimensions
Dimensions W/H/D 35 mm/116 mm/114.5 mm
General data
Overvoltage category II
Degree of protection IP20
Degree of pollution 2
Type of housing PA 6.6-FR, green
Flammability rating according to UL 94 V0
Supply
Supply voltage range 10.8 V DC ... 30.5 V DC
Max. current consumption 328 mA (@24VDC)
Transient surge protection Yes
Nominal power consumption 1.7 W (30 dBm)
Power consumption 8.4 W (peak; 30 dBm)
Wireless interface
Antenna connection method RSMA (female)
Direction Bi-directional
Frequency 900 MHz
Frequency range 902 MHz ... 928 MHz
Data transmission rate (adjustable) 16 kbps
125 kbps
250 kbps
500 kbps
Receiver sensitivity -112 dBm (16 kbps)
-105 dBm (125 kbps)
-102 dBm (250 kbps)
-95 dBm (500 kbps)
Transmission power max. 1 W (adjustable)
Security 128-bit data encryption

RAD-900-IFS
3225_en_H PHOENIX CONTACT 7/22
RS-232, 3-wire
Connection method COMBICON plug-in screw terminal block
D-SUB-9 female connector
Transmission speed 0.3 ... 115.2 kbps
RS-485, 2-wire
Connection method COMBICON plug-in screw terminal block
Transmission speed 0.3 ... 115.2 kbps
Termination resistor (switchable via DIP switches) 390 Ω/150 Ω/390 Ω
RSSI voltage output
Number of outputs 1
Voltage output signal 0 V ... 3 V
RF link relay output
Number of outputs 1
Contact type PDT
Contact material PdRu, gold-plated
Maximum switching voltage 30 V AC/DC
Max. switching current 500 mA
Electrical service life 5 x 105switching cycles with 0.5 A at 30 V DC
Connection data
Connection method Screw connection
Conductor cross section, solid 0.2 mm² ... 2.5 mm²
Conductor cross section, flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG/kcmil 24 ... 14
Stripping length 7 mm
Tightening torque 0.6 Nm
Status indication
Status display Green LED (supply voltage, PWR)
Green LED (bus communication, DAT)
Red LED (periphery error, ERR)
3x green, 1x yellow LED (LED bar graph receive quality, RSSI)
GreenLED (receive data, RX)
GreenLED (transmit data, TX)

RAD-900-IFS
3225_en_H PHOENIX CONTACT 8/22
Ambient conditions
Ambient temperature (operation) -40°C ... 70°C
-40°F ... 158°F
Ambient temperature (storage/transport) -40°C ... 85°C
-40°F ... 185°F
Permissible humidity (operation) 20% ... 85%
Permissible humidity (storage/transport) 20% ... 85%
Altitude 2000 m
Vibration (operation) in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
Shock 16g, 11 ms
Certification
Conformance FCC Directive, Part 15.247
ISC Directive RSS 210
UL, USA/Canada Class I, Div. 2, Groups A, B, C, D
UL, USA Class I, Zone 2, AEx nA nC IIC T4
UL, Canada Class I, Zone 2, Ex nA nC nL IIC T4 Gc X
CSA CSA C22.2

RAD-900-IFS
3225_en_H PHOENIX CONTACT 9/22
5 Safety regulations and installation
notes
5.1 Installation notes
The use of antennas with a gain greater than 6dBi may
require that the transmit power be reduced from the default
setting of 30 dBm. Regulations limit the equivalent
isotropically-radiated power (EIRP) to 36dBm. The EIRP
may be calculated as the transmit power (Pt) minus any
cable loss (Lc) plus the antenna gain (Ga).
For example, in the case of a 12dBi antenna used with a
cable run with a 4dB loss, the transmit power must be
reduced to 28dBm or less such that the EIRP does not
exceed 36dBm.
5.2 Installation and operation
Follow the installation instructions.
Error-free operation of this device can only be ensured if
transport, storage, and assembly are carried out correctly
and operation and maintenance are carried out with care.
When installing and operating the device, the applicable
safety directives (including national safety directives),
accident prevention regulations, as well as general technical
regulations, must be observed.
Provide a switch/circuit breaker close to the device, which is
labeled as the disconnect device for this device.
Provide overcurrent protection (I≤6A) in the installation.
The radio should not be operated without an antenna or
terminating load on the antenna connector.
Please note that, in combination with
antennas, the maximum permissible
transmission power may be exceeded.
Please set the transmission power via the
software.
EIRP = Pt - Lc + Ga
The PSI-CONF configuration and diagnostic
software can be used to configure the transmit
power.
Operation of the wireless system is only
permitted if accessories available from
Phoenix Contact are used. The use of other
accessory components may invalidate the
device approval status.
NOTE:Installation, operation, and
maintenance may only be carried out by
professionals.
WARNING: Risk of electric shock
During operation, certain parts of this device
may carry hazardous voltages. Disregarding
this warning may result in damage to
equipment and/or serious personal injury.
NOTE: Access to circuits within the device is
not permitted.
During maintenance work, disconnect the
device from all effective power sources.
NOTE: The IP20 degree of protection (IEC
60529/EN 60529) of the device is intended for
a clean and dry environment. Do not subject
the device to mechanical and/or thermal loads
that exceed the specified limits.
NOTE: Prolonged operation without an
antenna or terminator may result in damage to
the radio.

RAD-900-IFS
3225_en_H PHOENIX CONTACT 10/22
5.3 Safety regulations for installation in potentially
explosive areas
Installation in areas with a danger of dust explosions
Installation in Class I, Div. 2 or Zone 2
5.4 Conformance
FCC
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment complies with the FCC RF radiation exposure
limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of
20 cm between the radiator and your body.
– FCC certificate: SGV-SHR-900
Industry Canada (IC)
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may
cause undesired operation of the device.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more
than that permitted for successful communication.
This device has been designed to operate with the antennas
listed in this document and having a maximum gain of
12dB. Antennas not included in this list or having a gain
greater than 12dB are strictly prohibited for use with this
device. The required antenna impedance is 50Ω.
Under Industry Canada regulations, this radio transmitter
may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not
more than that necessary for successful communication.
– IC certificate: IC4720C-SHR900
WARNING: Explosion hazard
The device is not designed for use in
atmospheres with a danger of dust
explosions.
WARNING!
The device is designed for installation in Class
I, Division 2/Zone 2 (UL/cUL) potentially
explosive areas. Observe the specified
conditions for use in potentially explosive
areas.
Install the device into a housing (control or
distributor box) with at least IP54 protection
(EN60529) and is certified for use in Class I,
Div. 2 or Zone 2.
When installing and connecting the supply
and signal circuits observe the requirements
of EN60079-14. Only devices suitable for
operation in Ex zone2 and the conditions at
the application site may be connected to the
circuits in zone2.
In potentially explosive areas, only connect
and disconnect cables when the power is
disconnected.
Installation/removal of the devices on/from
the TBUS DIN rail connector may only be
performed when no voltage is applied.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference, in which case, the
user will be required to correct the
interference at his own expense.