PhotoCentric CURE L User manual

PHOTOCENTRIC
CURE L
INSTALLATION
GUIDE
www.photocentricgroup.com
UK - Cambridge House, Oxney Road, Peterborough, PE1 5YW. [phone]
USA - 2205 West Parkside Lane, Phoenix, 85027, AZ. [phone]
CURE L

2Internal fan
5Timer indicator 9Heater 1On O switch
6Heater indicator 10 Door seal
13 Glass shelf
3Temperature unit 7Timer switch 11 Rear UV light
8Hanging bracket 12 Bottom UV light
4Temperature adjustment
1
2
3
4
5
6
7
8
9
10
11
12
13
PHOTOCENTRIC CURE L INSTALLATION GUIDE
1. Cure L at a glance
Figure 1: Cure L general layout
CURE L
1 2

CURE L CURE L
Figure 3: Cure L space requirements, plan view
3 4
613
660 660
620
MINIMUM DOOR
ANGLE FOR ACCESS
MAXIMUM
DOOR ANGLE
Figure 2: Cure L space requirements, front view
2. Suitable location
When choosing a suitable location for your Photocentric Cure L,
allow plenty of space (see Figure 2 and Figure 3). All diagrams
have dimensions in millimetres unless otherwise stated. Consider
the ergonomics of operating the cure unit.
50724
660
MINIMUM CLEARANCE
FOR VENTILATION

CURE L
NOTES
[email protected]
Cambridge House, Oxney Road, Peterborough, PE1 5YW
www.photocentricgroup.com
Contact for further enquiries
56
3. Unboxing & Placing Cure L
Remove the outer packaging and recycle it.
Photocentric Cure L weighs 64 kg. Carefully consider how it will
be lifted into position. Allow plenty of space to work and remove
any potential obstructions. Four people will be required to lift
Photocentric Cure L, one at each corner. Use safety gloves with
a secure grip surface to prevent slipping. Ensure everybody
involved is comfortable lifting the weight. Follow safe lifting
practice.
Keep the cure unit level and stable at all times. Always use
Photocentric Cure L in a well ventilated area.
4. Power requirements
• Photocentric Cure L requires a mains power supply
with a voltage of 100 VAC - 240 VAC and a frequency of
50 Hz - 60 Hz. It has a power consumption of 1000 W.
• It will draw a current of 4 A when connected to a 240
VAC supply, or 9 A when connected to a 100 VAC
supply.
• Only connect Photocentric Cure L to the mains socket
using the power cable supplied.
• Always plug the power cable into the mains socket and
the cure unit before switching on the power at the mains
socket.
• Similarly, always switch o the power at the mains
socket before unplugging the power cable from either
the cure unit or the mains socket.
• The cure unit power socket is on the back of the machine
on the right side. The power switch is on the front of the
machine, at the top left (Figure1-1).
CURE L CURE L