PIAGGIO Beverly 300 i.e. User manual

PIAGGIO WOULD LIKE TO THANK YOU
for choosing one of its products. We have prepared this booklet to help you to get the very best from your scooter. Please read it carefully before riding
the vehicle for the first time. It contains information, tips and precautions for using your vehicle. It also describes features, details and devices to assure
you that you have made the right choice. We believe that if you follow our suggestions, you will soon get to know your new vehicle and use it for a long
time at full satisfaction. This booklet forms an integral part of the vehicle; should the vehicle be sold, it must be transferred to the new owner.
Beverly Tourer 300ie
Ed. 01

The instructions given in this booklet are intended to provide a clear, simple guide to using your scooter; this booklet also details routine maintenance
procedures and regular checks that should be carried out on the vehicle at an authorised Dealer or Service Centres. The booklet also contains
instructions for simple repairs. Any operations not specifically described in this booklet require the use of special tools and/or particular technical
knowledge: to carry out these operations, refer to any authorised Dealer or Service Centres.
2

Personal safety
Failure to completely observe these instructions will result in serious risk of personal
injury.
Safeguarding the environment
Sections marked with this symbol indicate the correct use of the vehicle to prevent dam-
aging the environment.
Vehicle intactness
The incomplete or non-observance of these regulations leads to the risk of serious
damage to the vehicle and sometimes even the invalidity of the guarantee.
The signs that you see on this page are very important. They are used to highlight parts
of the booklet that should be read with particular care. The different symbols are used
to make each topic in the manual simple and quick to locate.
3

4

INDEX
VEHICLE...................................................................................... 7
Dashboard................................................................................ 9
Analogue instrument panel....................................................... 9
Clock......................................................................................... 12
Key switch................................................................................. 12
Locking the steering wheel.................................................... 13
Releasing the steering wheel................................................ 13
Switch direction indicators........................................................ 14
Horn button............................................................................... 14
Light switch............................................................................... 15
Start-up button.......................................................................... 15
Engine stop button.................................................................... 16
The immobilizer system............................................................ 16
Keys...................................................................................... 16
Immobilizerdevice enabled indicator led............................... 17
Operation............................................................................... 18
Programming the immobilizer system................................... 19
Accessing the fuel tank............................................................. 20
Power supply socket................................................................. 21
Opening the saddle............................................................... 22
Identification.............................................................................. 22
Rear top box opening................................................................ 24
Bag clip..................................................................................... 24
USE.............................................................................................. 25
Checks...................................................................................... 26
Refuelling.................................................................................. 26
Tyre pressure............................................................................ 28
Shock absorbers adjustment.................................................... 29
Running in................................................................................. 30
Starting up the engine............................................................... 31
Stopping the engine.................................................................. 32
Anti-theft ring............................................................................. 32
Stand......................................................................................... 32
Automatic transmission............................................................. 34
Safe driving............................................................................... 34
MAINTENANCE........................................................................... 37
Engine oil level.......................................................................... 38
Engine oil level check............................................................ 38
Engine oil top-up................................................................... 39
Warning light (insufficient oil pressure)................................. 39
Engine oil change.................................................................. 40
Hub oil level.............................................................................. 41
Tyres......................................................................................... 43
Spark plug dismantlement........................................................ 45
Removing the air filter............................................................... 46
Air filter cleaning....................................................................... 47
Cooling fluid level...................................................................... 47
Checking the brake oil level...................................................... 49
Braking system fluid top up................................................... 49
Battery....................................................................................... 50
Use of a new battery............................................................. 51
Long periods of inactivity.......................................................... 52
Fuses........................................................................................ 52
Lamps....................................................................................... 56
Front light group........................................................................ 58
Headlight adjustment............................................................. 60
Front direction indicators........................................................... 61
Rear optical unit........................................................................ 61
Number plate light..................................................................... 63
Helmet compartment lighting bulb............................................ 64
Rear-view mirrors...................................................................... 64
Front and rear disc brake.......................................................... 64
Puncture.................................................................................... 65
Periods of inactivity................................................................... 66
Cleaning the vehicle.................................................................. 67
Troubleshooting........................................................................ 68
5

TECHNICAL DATA...................................................................... 73
Kit equipment............................................................................ 78
SPARE PARTS AND ACCESSORIES........................................ 79
Warnings................................................................................... 80
PROGRAMMED MAINTENANCE............................................... 83
Scheduled maintenance table................................................... 84
6

Beverly Tourer 300ie
Chap. 01
Vehicle
7

01_01
8
1 Vehicle

Dashboard (01_01)
A= Ignition key-switch
B= Bag hook
C= Saddle electric opening switch
D= Horn button
E= Turn indicator switch
F= Rear brake lever
G= Light switch with passing
H= Instrument panel
I= Emergency cut-off switch RUN/OFF
L= Front brake lever
M= Throttle grip
N= Starter button
Analogue instrument panel (01_02)
A= Immobilizer LED
B= Speedometer (mph)
C= Total Odometer
D= Speedometer (km/h)
E= Injection telltale light
F= High-beam warning light
9
1 Vehicle

G= Oil pressure warning light
H= Digital clock
I= Low fuel warning light
L= Right turn indicator warning light
M= Clock controls
N= Fuel gauge
O= Water temperature gauge
P= Headlight warning light
Q= Trip odometer
R= Odometer reset button
S= Left turn indicator warning light
10
1 Vehicle

01_02
11
1 Vehicle

01_03
Clock (01_03)
Located in the instrument panel, it displays hours and minutes with 1 to 12-hour time,
AM or PM.
Operate the function selection button «B» and month, day and seconds are also dis-
played besides hours and minutes.
Toadjustthedifferentfunctions,selectthedesiredfunctionwithbutton«A»andadjust
with button «B». The time counter can be reset by pressing button «A» with the clock
in the seconds function.
Key switch (01_04)
Ignition key «A» is located on the front leg shield back plate near the bag hook.
01_04
SWITCH POSITIONS
ON«1»: Ready to start position, non-extractable key, mechanical antitheft device dis-
abled.
OFF «2»: Ignition disabled, extractable key, mechanical antitheft device disabled.
LOCK «3»: Ignition disabled, extractable key, mechanical antitheft device enabled.
12
1 Vehicle

01_05
Locking the steering wheel (01_05)
Turn the handlebar to the left (as far as it will go), turn the key to «LOCK» and remove
the key.
01_06
Releasing the steering wheel (01_06)
Reinsert the key and turn it to «OFF».
13
1 Vehicle

01_07
Switch direction indicators (01_07)
Move switch «E» to the left to indicate a left turn; move switch «E» to the right to
indicate a right turn. Push the central part of switch «E» to deactivate the turn indica-
tors.
01_08
Horn button (01_08)
Push the button «D» to sound the horn.
14
1 Vehicle

01_09
Light switch (01_09)
When the light switch «H» is set to «0», the low-beam light is on. When set to «1»,
the high-beam light is activated. If the light switch «H» is pressed when set to «2», the
high-beam light flashing is activated. The switch goes back to «0» automatically.
CAUTION
DO NOT CARRY ANY GARMENTS ON THE FRONT HEADLIGHT ASSEMBLY.
THIS MAY CAUSE THE BULBS TO OVERHEAT AND THEREFORE, TO THEIR
ABNORMAL WEAR.
01_10
Start-up button (01_10)
Starter button «E»
15
1 Vehicle

01_11
Engine stop button (01_11)
The engine can be started when the emergency cut-off switch «I» is set to «1»
RUN; if the emergency cut-off switch «I» is set to «0» OFF, the engine cannot be
started, or it shuts off if already running.
The immobilizer system
In order to enhance theft protection, the vehicle is equipped with a «PIAGGIO IMMO-
BILIZER » electronic engine locking device that is activated automatically when the
ignitionkeyisremoved.Uponstart-up,the«PIAGGIO IMMOBILIZER»systemchecks
the starter key, and only if this key is recognised will the Immobilizer system allow the
vehicle to be started.
01_12
Keys (01_12, 01_13, 01_14)
Two types of keys are supplied together with the vehicle.
Key «A» is the «MASTER» key.
Only a single copy of this key is supplied, which is necessary to program all your other
keys and for your dealer to perform some maintenance operations. For this reason it
is advised that it be used only in exceptional circumstances.
The key «B» (single copy supplied) is used for regular operations such as:
- Engine start-up.
Together with the two keys, you will be given a CODE CARD bearing the same code
imprinted onto the two keys.
16
1 Vehicle

01_13
01_14
WARNING
LOSING THE MASTER KEY PREVENTS ANY FURTHER REPAIR OF THE "PIAG-
GIO IMMOBILIZER" SYSTEM AND OF THE ENGINE CONTROL UNIT.
WARNING
KEEP THE "CODE CARD" AND THE MASTER KEY IN A SAFE PLACE (NOT IN
THE VEHICLE).
01_15
Immobilizerdevice enabled indicator led (01_15)
The activation of the «PIAGGIO IMMOBILIZER» system is signalled by the a flashing
indicator «A».
In order to reduce battery discharge, the indicator LED turns off automatically after 48
hours of uninterrupted functioning.
Should the system fail, different LED flashing patterns will provide the Authorised
Service Centre with information on the type of fault detected.
17
1 Vehicle

Operation
Each time the starter key «B» is removed while in the «OFF» or «LOCK» positions,
the protection system activates the engine lock. Turning the starter key «B» to «ON»
disables the engine lock, provided that the safety system recognises the code trans-
mitted by the key. If the code is not recognised, turn the starter key «B» first to
«OFF»and thenbackto«ON»again; iflockpersists,try again usingthe«A»MASTER
key. If the engine cannot be started, contact an Authorised Service Centre, which
is provided with the electronic equipment required to detect and repair the system.
When the supplementary starter keys are required, remember that the all the keys,
whether new or existing, should be programmed.
Contact an Authorised Service Centre and bring the «A» MASTER key and all
«B» starter keys that you own.
The codes of starter keys not submitted for the new programming procedure are de-
leted from the memory. Any lost starter keys will therefore not be enabled to start the
engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF THE VEHICLE IS SOLD, THE MASTER-HANDGRIP KEY (AS WELL AS THE
OTHER STARTER KEYS) AND THE «CODE CARD» MUST ALSO BE TRANS-
FERRED TO THE NEW OWNER.
18
1 Vehicle

Programming the immobilizer system (01_16)
Below is described the procedure to follow for programming the PIAGGIO IMMOBIL-
IZER system and/or for storing other key codes. The programming procedure should
be carried out with the engine stop switch set to «RUN».
START PROCEDURE
Insert the «MASTER» key «A» into the key switch (in «OFF») and turn it to «ON».
After 1 - 3 seconds, turn the key to «OFF » again and pull it out.
INTERMEDIATE STAGE
After extracting the «MASTER» key «A», insert, within ten seconds, the key that is
going to be programmed «B» and turn it immediately to «ON». After 1-3 seconds, turn
the key to «OFF» again and pull it out. In this way, a maximum of 7 keys can be
programmed by repeating the above procedure and keeping the indicated times.
FINAL STAGE
After extracting the key to be programmed «B», insert the «MASTER» key «A» again
and turn it to «ON» (perform this operation within the 10 seconds following the ex-
traction of the previous key). Leave it in this position for 1 to 3 seconds and return it
to «OFF».
19
1 Vehicle

01_16
CORRECT PROGRAMMING CHECK PHASE
Insert the «MASTER» key «A» disabling the transponder «C» (i.e., by tilting the key
cap by 90°), and turn the key to «ON». Perform the engine start-up operation. Ensure
that the engine does not start. Insert the programmed key «B» and repeat the start-
up operation. Check that engine starts.
WARNING
SHOULD YOU START THE ENGINE WITH THE MASTER KEY (WITH TRANS-
PONDER OFF) OR IN THE EVENT OF WRONG OPERATION DURING PROGRAM-
MING, REPEAT THE PROCEDURE FROM THE BEGINNING.
01_17
Accessing the fuel tank (01_17, 01_18)
Insert the key into the switch and press down until the glove box opens. In the event
that the key switch is in «LOCK», turn the key to «OFF» or «ON» before pressing
down. Press lever «B» and open the cover over the fuel tank cap «C».
20
1 Vehicle