Pilz PNOZ X6 Quick start guide

Emergency Stop Relays, Safety Gate Monitors
Category 3, EN 954-1
PNOZ X6
Safety gate monitor and emergency
stop relay in accordance with
VDE 0113 part 1, 11/98, EN 60204-1,
12/97 and IEC 204-1, 11/98
Features
●PST 3 compatible
●Single-channel or dual-channel
which detects shorts across the
inputs
●Designed for driving via semi-
conductors
●Automatic or monitored manual
reset
●Simultaneity monitoring can be
switched-on or off
Approvals
Technical Data PNOZ X6
Electrical Data
Supply Voltage AC: 42, 100, 110 ... 120, 200, 230 ... 240 V
AC/DC: 24 V
Tolerance 85 ... 110 %
Residual Ripple DC Max. 120 %
Power Consumption Approx. 1,5 W/5,0 VA
Voltage and Current at input circuit and 24 VDC, 50 mA
feedback control loop
Switching Capability in accordance with AC1: 240 V/8 A/2000 VA
EN 60947-4-1, 10/91 400 V/5 A/2000 VA
DC1: 24 V/8 A/200 W
EN 60947-5-1, 10/91 AC15: 230 V/5 A
(DC13: 60 cycles/min) DC13: 24 V/7 A
Output Contacts 3 N/O safety contacts
Contact Fuse Protection 10 A quick or 6 A slow
to EN 60947-5-1, 10/91
Max. permitted Switch-on Current 10 A
Times
Response Delay Approx. 300 ms
Delay-on De-energisation Approx. 50 ms
Recover Time Approx. 200 ms
Simultaneity channel 1/2 Approx. 200 ms or ¥
Max. Supply Interrupt before De-energisation 10 ms
Mechanical Data
Max. cross section of 2 x 2.5 mm2
external conductors Single-core or multi-core with crimp
connectors
Dimensions (H x W x D) 87 x 45 x 121 mm
Weight AC: 400 g, DC: 300 g
Description
●45 mm P-97-housing, DIN-Rail
mounting
●Relay outputs, positive-guided:
– 3 (N/O) safety contacts
●Connections:
– e-stop button
– safety gate limit switch
– reset button
●LED indicators: channel 1/2 and
supply voltage
●Increase in the number of
contacts available by connecting
external contactors / relays
Operating Modes
●Single-channel
●Dual-channel
●Automatic reset
●Manual reset
●Monitored manual reset
Pilz GmbH & Co., Felix-Wankel-Straße 2, 73760 Ostfildern, Deutschland NSG-D-2-047-07/00
Telefon [phone], Telefax [phone], E-Mail: [email protected]
PNOZ X6
●
●
●

Emergency Stop Relays, Safety Gate Monitors
Category 3, EN 954-1
PNOZ X6
Internal Wiring Diagram
External Wiring
●Example 1
Single-channel E-Stop wiring with
manual reset
●Example 2
Dual-channel E-Stop wiring with
manual reset
+
~
=
S12S11 13 23 33
14 24 34
K2
K1
K3
K1 K2
Y2Y1
PNOZ X6
S24S23
K3 C1
Y4Y3
K3
K1
K2
F1
G1
K1K3
K1
K2
K2
K3
A2
(L-)
A1
(L+) B
UY2
●Example 5
Dual-channel safety gate control with
automatic reset, simultaneity: ¥
●Example 6
Dual-channel safety gate control with
automatic reset, simultaneity: max.
200 ms
●Example 4
Dual-channel safety gate control with
manual reset
●Example 3
Dual-channel safety gate control with
monitored reset
●Increase in contacts
If required the number of output
contacts on the PNOZ X6 can be
increased using external relays /
contactors.
–Key
S1/S2: E-Stop or safety gate switch
S3: Reset button
Switch activated
Gate not closed
Gate closed
S11 S12 Y1
Y2S24
S1 S3
S12
S11 Y1
Y2
S1 S3
S12
S23
S24
S11
S24
S12
S23
Y1
Y2
Y2
Y3
S3
S2
S1
Y2
Y1
S11
S24
S12
S23
S2
S1
S3
Y4Y2
Y1 Y3
S11
S24
S12
S1
S2
S23
Y2
Y1
S11
S24
S12
S1
S2
S23
14
K4 K5
13
Y1 Y2
K4 K5
1L1
(1L+)
1L2
(1L-)
Pilz GmbH & Co., Felix-Wankel-Straße 2, 73760 Ostfildern, Deutschland NSG-D-2-047-07/00
Telefon [phone], Telefax [phone], E-Mail: [email protected]

Emergency Stop Relays, Safety Gate Monitors
Category 3, EN 954-1
PNOZ X6
Pilz GmbH & Co., Felix-Wankel-Straße 2, 73760 Ostfildern, Deutschland NSG-D-2-047-07/00
Telefon [phone], Telefax [phone], E-Mail: [email protected]
General Technical Data
Unless stated otherwise in the technical details for the specific unit
Electrical Data
Frequency Range AC 50 ... 60 Hz
Residual Ripple DC 160 %
Contact Material AgSnO2
Continuous Duty 100 %
Environmental Data
EMC EN 50081-1, 01/92, EN 50082-2, 03/95
Vibration in accordance with Frequency: 10 ... 55 Hz,
EN 60068-2-6, 04/95 Amplitude: 0.35 mm
Climatic Suitability DIN IEC 60068-2-3, 12/86
Airgap Creepage DIN VDE 0110 part 1, 04/97
Ambient Temperature -10 ... +55 °C
Storage Temperature -40 ... +85 °C
Mechanical Data
Torque Setting on Connection Terminals 0.6 Nm (screws)
Mounting Position Any
Housing Material Thermoplast Noryl SE 100
Protection Mounting: IP 54
Housing: IP 40
Terminal Range: IP 20
The units were tested in accordance with the relevant standards current at
the time of development.
Order References
Type UBOrder No.
PNOZ X6 24 V AC/DC 774 729
PNOZ X6 120-110 V AC 774 725
PNOZ X6 230-240 V AC 774 726