PINARELLO NYTRO User manual

2017 - Copyright © Cicli Pinarello SRL - C.F. e P.I. 05994100963
QUICK GUIDE

QUICK GUIDE
2CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. [phone] | fax [phone] | www.pinarello.com
INDEX
1. SWITCHING EBIKE SYSTEM ON/OFF
2. SETTING THE SUPPORT LEVEL
3. SWITCHING THE WALK-ASSISTANCE MODE ON/OFF
4. STATE-OF-CHARGE AND SUPPORT LEVEL BAR
5. CHARGING THE BATTERY PACK
6. INSERTING THE BATTERY PACK
7. MOUNTING AND DISMOUNTING THE DRIVE
PACK IN THE EBIKE
3
4
4
5
6
7
8
............................................................
.....................................................................
...............................
....................................
.....................................................................
...................................................................
...............................................................................................

QUICK GUIDE
3CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. [phone] | fax [phone] | www.pinarello.com
Once the Drive pack is mounted on the eBike, press the on/off button the
button on the battery.
The system can be switched on by pressing any of the Remote buttons.
For switching off the system there are two options:
1. Press and hold the middle button of the Remote for 2 s.
2. Unmount the Drive pack from the eBike and switch off the Battery Pack by
pressing the on/off button for 2 s.
1. SWITCHING EBIKE SYSTEM ON/OFF
Step 1
Step 2

QUICK GUIDE
4CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. [phone] | fax [phone] | www.pinarello.com
To activate the Walk-assistance mode:
· Set your system to “No Support“ mode on the Remote (See section
Setting the Support Level).
· Then, press and hold the down button on the Remote.
· After 2 s the Walk-assistance mode switches on.
You can set on the Remote to what extent should the eBike system support
you when pedalling.
The support level can be set at any time, even while riding.
To switch the support level, you must press the up/down buttons on the
Remote.
The following support levels are available:
2. SETTING THE SUPPORT LEVEL
Support Level Color Max. Support factor Max. Power
No Support White 0 % 0 W
Breeze Green 75 % 125 W
River Blue 150 % 250 W
Rocket Pink 240 % 400 W
3. SWITCHING THE WALK-ASSISTANCE MODE ON/OFF

QUICK GUIDE
5CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. [phone] | fax [phone] | www.pinarello.com
The state of charge/support level bar shows 2 parameters:
State-of-charge of your Battery Pack:
indicated by the number of LEDs that are lit.
When fully charge at the Battery Pack, all 10 LEDs are lit.
Every LED meant 10% battery status.
However, if Battery Pack is empty, then no LEDs will light up.
Selected support level of your eBike:
indicated by the shining colour of the LEDs
4. STATE-OF-CHARGE AND SUPPORT LEVEL BAR

QUICK GUIDE
6CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. [phone] | fax [phone] | www.pinarello.com
The Battery Pack can be recharged at any time on its own, within a Drive
pack, or within your eBike.
Interrupting the charging process at any moment is also possible.
- Connect the power plug of the power cord to the power socket of the Charger.
- Then connect the mains plug to the mains supply.
- Finally, connect the charge connector into the charge plug of your Battery
Pack.
- Once the Battery Pack is fully charged, the LEDs at the charge-control
indicator turn off.
The state-of-charge can now be checked by briey pressing the on/off button
on your Battery Pack.
5. CHARGING THE BATTERY PACK
Action C
Action B
Charger 1

QUICK GUIDE
7CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. [phone] | fax [phone] | www.pinarello.com
Step 1
Step 2
Action A
Action B
To insert the Battery Pack into the Drive pack, hold the Drive pack in one
hand and Battery Pack in the other hand. Make sure the connector to the
Drive pack is facing the battery slot. Bring the two together and gently let the
Battery Pack slip into the battery slot of the Drive pack.
Once the Battery Pack is completely inserted, the fastening lid will
automatically lock the Battery Pack.
6. INSERTING THE BATTERY PACK

QUICK GUIDE
8CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia
C.F. - R.I. - P.IVA IT 05994100963 | tel. [phone] | fax [phone] | www.pinarello.com
Step 1
Step 2
After inserting the Battery Pack in the Drive pack, lay the interface to Bottom
Bracket over the open interface to Drive pack right underneath your eBike
downtube.
Now bring the upper part of the Drive pack inside the downtube until the
fastening hook hooks in.
Make sure the Drive pack is tightly anchored within the downtube and does
not come out.
Action A
Step 1
Step 2
Action B
To Dismount the Drive pack, Hold the mounted Drive pack with one hand
and press the release button with the other hand.
You can now remove the Drive pack easily.
Important!
Make sure that you are holding your Drive pack when dismounting it,
otherwise the Drive pack may fall freely from the frame.
Note:
Sometimes pushing up the Drive pack against the frame before pressing the
release button may result in a smoother dismounting.
7. MOUNTING AND DISMOUNTING THE DRIVE
PACK IN THE EBIKE

Cicli Pinarello SRL
Viale della Repubblica 12
31020 Villorba (TV) Italy
tel. [phone] fax [phone]
[e-mail]
www.pinarello.com
2017 - Copyright © Cicli Pinarello SRL - C.F. e P.I. 05994100963