Pinegreen Lighting CL-MWP3500L-3CCT User manual

1
INSTALLATION INSTRUCTIONS: CL-MWP3500L-3CCT | 3500 LUMEN MINI WALL PACK
PRECAUTIONS:
Please read and understand this entire manual before installing or operating this light xture.
• Read all instructions before installation, then store in a safe place for
future reference. Failure to do so may result in faulty assembly
and potential injury.
• Thislightxtureshouldbeinstalledoutdoorstoawall.
• Do not immerse components in liquid.
• Yourlightiswater-resistant.
• Neverlookdirectlyintothelightwhenilluminated.
• This product is designed to operate in temperatures ranging from
 -40oF to 113oF(-40oCto45oC).
• If you are unfamiliar with electrical installation contact a qualied
electrician.
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
WARNING:Beforeinstallationorservicing,turnthepowerOFFatthecircuitbreakerorfuse.Placetapeoverthecircuitbreakerswitch
andverifypowerisOFFatthelightxture.
CAUTION:Burnhazard.Allowthelightxturetocoolbeforetouching.
CAUTION:Donotmountthextureupsidedown.
WARNING:Riskofre.Keepthelampheadsatleast3in.fromcombustiblematerials.
PowerDrill
Silicone Sealant
NOTINCLUDED
Electrical
Tape
Wire Stripper
PhillipsScrewdriver
Ladder
Safety Glasses
Level
1/8” Drill Bit
NOTINCLUDED
TOOLS REQUIRED:
HARDWARE:
1XLight
4xMountingScrews 3xLargeWireNuts 2xSmallWireNuts
6 x Wall plugs
6 x Mounting Screws
Please read these instructions thoroughly prior to installation, then store in a safe place for future reference.
1 x Solar Panel
1 x Motion Light
1
1 X Mounting Plate
SOLAR MOTION LIGHT
4xWallAnchors
6 x Wall plugs
6 x Mounting Screws
Please read these instructions thoroughly prior to installation, then store in a safe place for future reference.
1 x Solar Panel
1 x Motion Light
1
1 X Mounting Plate
SOLAR MOTION LIGHT
If you have questions or are missing parts, please contact customer service at 1-888-745-4837

2
INSTALLATION INSTRUCTIONS: CL-MWP3500L-3CCT | 3500 LUMEN MINI WALL PACK
If you are unfamiliar with electrical
installation contact a qualied
electrician.
Make sure the power is OFF from
the circuit breaker.
Drill (2) holes in the mounting location
using a 1/8" drill bit. Utilize the side
base holes of the light (A) as shown in
Fig 1.
Connect the wires as shown in Fig 2.
Live (Black)
Neutral (White)
Ground (Yellow/Green)
Dim+ (Purple)
Dim- (Pink)
If you are not using a dimmer, use (2)
wire nuts (E) or electric tape to cap
the purple and pink wires so they
are not left exposed.
Use wire nuts (D) to cap the
connected wires. If desired, you can
use electrical tape for extra security
as shown in Fig 2A (Ground/Yellow/
Green connection).
L(Black)
N(White)
G(Yellow/Green)
Dim+(Purple)
Dim-(Pink)
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
Fig 2
Fig 1 1
2
Fig 2A
INSTALLATION VERSION 1 (UTILIZING THE SIDE SCREW HOLES)
If you have questions or are missing parts, please contact customer service at 1-888-745-4837

3
INSTALLATION INSTRUCTIONS: CL-MWP3500L-3CCT | 3500 LUMEN MINI WALL PACK
Use (2) wall anchors (C), insert into
each drilled hole, then use (2) screws
(B) to fasten the base (A) to the
surface as shown in Fig 3.
OPTIONAL: Add silicon sealant (not
included) around the xture and
wall to create a waterproof seal.
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
Fig 3 3
INSTALLATION VERSION 2 (UTILIZING A JUNCTION BOX)
If you are unfamiliar with electrical
installation contact a qualied
electrician.
Make sure the power is OFF from
the circuit breaker.
Unscrew the (4) screws on the front
cover (A) as shown in Fig 1.
Fig 1 1
If you have questions or are missing parts, please contact customer service at 1-888-745-4837

4
INSTALLATION INSTRUCTIONS: CL-MWP3500L-3CCT | 3500 LUMEN MINI WALL PACK
Unplug the male and female
connectors.
Remove the front cover from the
base as shown in Fig 2.
COVER
BASE
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
2
Fig 2
Align the base (A) with the junction
box. On the base (A), mark where
the junction box screw holes align
with the base (A). Drill (4) holes in
the base (A) using a 1/8" drill bit,
then screw the base (A), onto the
junction box using (4) screws (B) as
shown in Fig 3.
Fig 3
Fig 4
3
If you have questions or are missing parts, please contact customer service at 1-888-745-4837

5
INSTALLATION INSTRUCTIONS: CL-MWP3500L-3CCT | 3500 LUMEN MINI WALL PACK
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
COVER
BASE
Reconnect the male and female
connectors. Re-attach the xture’s
front cover onto the base as shown
in Fig 5. Make sure not to pinch the
wires. Turn the power back on.
OPTIONAL: Add silicon sealant (not
included) around the xture and
wall to create a waterproof seal.
5
Connect the wires as shown in Fig 4.
Live (Black)
Neutral (White)
Ground (Yellow/Green)
Dim+ (Purple)
Dim- (Pink)
If you are not using a dimmer, use (2)
wire nuts (E) or electric tape to cap
the purple and pink wires so they
are not left exposed.
Use wire nuts (D) to cap the
connected wires. If desired, you can
use electrical tape for extra security
as shown in Fig 4A (Ground (Yellow/
Green) connection).
Fig 4
Fig 5
4
Fig 4A
L(Black)
N(White)
G(Yellow/Green)
Dim+(Purple)
Dim-(Pink)
If you have questions or are missing parts, please contact customer service at 1-888-745-4837

6
Switch for
Watts
Switch for
CCT &
Photocell
LUMEN:
25W = 3500 Lumen
20W = 2600 Lumen
15W = 2000 Lumen
CCT:
5000K
4000K
3000K
PHOTOCELL:
ON/OFF
L R
INSTALLATION INSTRUCTIONS: CL-MWP3500L-3CCT | 3500 LUMEN MINI WALL PACK
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
To adjust the settings, unscrew the cap on the right side of the light (A) to access the CCT, Photocell, and the cap on the left side to
access the Wattage as shown in Fig 6. Select the desired CCT, Wattage, and Photocell function, then screw the caps back on. Make
sure the clear cap is screwed back on the right access point. Failure to do so will cause the Photocell not detect dusk/dawn and will
fail to activate the light.
TROUBLESHOOTING:
Problem Possible Cause Solution
The xture does not light. The power is o. Check the power supply and make sure it is ON.
There is a bad wire connection. Check the wiring.
The switch is defective. Test and/or replace the switch.
Too much ambient light for dusk Check surroundings or relocate light.
to dawn activation.
Circuit breaker trips when Incorrect wire connections, or hot Ensure wires are connected correctly.
the power is sent to the light. wires are grounded out. Contact an Electrician.
CARE AND MAINTENANCE:
Thelightshouldbecleanedwithadampcottonclothregularly.
ThisdevicecomplieswithPart15oftheFCCrules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcause
harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
If you have questions or are missing parts, please contact customer service at 1-888-745-4837
This product has a two-year limited warranty from the date of purchase.
This guarantees against failure due to factory defects, whether caused by
materials or workmanship. The warranty is non-transferable and only pertains
to the original purchaser. Proof of purchase is required for any repair or
replacement, so please keep your proof of purchase receipt. This warranty
does not cover normal wear and tear or damage due to misuse. Misuse of this
product includes but is not limited to:
• Using outdoors in extreme weather conditions.
• Opening the product’s housing.
• Any attempts to update, remodel or x the unit yourself.
EYES:
• DO NOT look directly at the LED lights.
• DO NOT remove the LED lights
protective covering.
Fig 6