Pioneer CA-HM-SUB.006 User manual

SUBARU
Compatible with double DIN devices
Double DIN Kit content Facia Plate
Mounting Brackets + Screws
FORESTER 2015->
Mount the brackets and connect
all cable then insert the
aftermarket unit into the housing
and fix it with screws saved before
(on the top side), use the screws
supplied for the bottom side.
Verify the proper functioning of
the system.
Remount the clima controls and
reassemble, in reverse order,
using parts saved before and
mount the facia plate provided.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
05/2014 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
This is the final result.
CA-HM-SUB.006

Remove the plastic panel by
unscrewing the screw under
the steering wheel.
Remove the clima control
panel.
Installation Manual Double DIN Kit
Unscrew and save the two
retaining screws shown in the
figure.
Remove the screw of the
original OEM inside the panel
shown in the figure.
Remove the second screw of
the original OEM, inside the
glove box, as shown in the
picture.
Remove the original unit,
unmount and save the clima
controls.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.