Pitco Frialator SG 14 User manual

Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 •1509 Route 3A, Bow NH 03304, USA
Phone [phone] •[phone] •Fax [phone] •www.pitco.com
L10-127 Rev 05 (04/08)
Model SG14
Tube Fired Gas Fryer
Project __________________________
Item number _____________________
Quantity _________________________
APPROVALS
 CSA Certified
(AGA, CGA)
 NSF Listed
 MEA Approved
 CE Certified
 Australian Gas Assoc.
Certified (AuGA)
Patent Pending
Model SG14
STANDARD ACCESSORIES
 Choice of basket options
 Two nickel-plated, oblong, wire mesh baskets
 One nickel-plated, square, wire mesh basket
 One nickel-plated tube rack
 One drain extension
 One drain line clean-out rod
 Fryer cleaner sample
 Rear gas connection
 Manual gas shutoff
 1 1/4” (3.2 cm) full port drain valve
 Built-in integrated flue deflector
 Removable basket hanger for easy cleaning
 9” (22.9 cm) adjustable legs
 Cabinet - stainless steel front, door, and sides
 Tank - mild steel
AVAILABLE OPTIONS & ACCESSORIES
 Stainless steel tank
 Stainless steel back
 9” (22.9 cm) adjustable casters
 Triple baskets
 Covers
STANDARD SPECIFICATIONS
CONSTRUCTION
 Welded tank with an extra smooth peened finish ensures
easy cleaning.
 Long-lasting, high-temperature alloy stainless steel heat
baffles are mounted in the heat exchanger tubes to provide
maximum heating and combustion efficiency.
 Standing pilot light design provides a ready flame when heat
is required.
 Stainless steel front, door, side, and splashback.
 Heavy duty 3/16” (.48 cm) door hinge.
CONTROLS
 Millivolt thermostat maintains selected temperature
automatically between 200°F (93°C) and 400°F (190°C-CE).
 Integrated gas control valve acts as a manual and pilot valve,
automatic pilot valve, gas filter, pressure regulator, and
automatic main valve.
 Gas control valve prevents gas flow to the main burner until
pilot is established and shuts off all gas flow automatically if
the pilot flame goes out.
 Temperature limit switch safely shuts off all gas flow if the
fryer temperature exceeds the upper limit.
 New Solstice burner/baffle design.***
-Increases cooking production.
-Lowers flue temperature.
-Improves working environment.
-Generates more production per BTU.
***Compared to previous models.
OPERATIONS
 Front 1 1/4” (3.2 cm) full port drain for quick draining.
 9” (22.9 cm) clearance allows for ease of cleaning.

Model SG14 - Tube Fired Gas Fryer
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 •1509 Route 3A, Bow NH 03304, USA
Phone [phone] •[phone] •Fax [phone] •www.pitco.com L10-127 Rev 05 (04/08) Printed in the USA
We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.
Model SG14
GAS REQUIREMENTS
Gas Input Per Hour
110,000 BTUs / 33W (CE) / 119 megajoules (AuGA)
Gas Type*
Recommended Minimum
Store Manifold Pressure Burner Manifold Pressure
*For other gas types, contact
your Dealer/Distributor.
Natural Gas 7” W.C. / 17.4 mbars / 1.75 kPa 4” W.C. / 10 mbars / 1 kPa
L.P. Gas 13” W.C. / 32.4 mbars / 3.25 kPa 10” W.C. / 25 mbars / 2.5 kPa
Check plumbing/gas codes for
proper gas supply line sizing.
Clearance Information Fryer Front
Fryer Sides, Rear, Bottom to
any combustible material Fryer Flue Area
All Models 30” (76.2 cm) min. 6” (15.2 cm)
Do not Curb Mount
Do not block or restrict the flue
gasses from flowing into the
ventilation system.
ELECTRICAL OIL CAPACITY
Control Type Voltage / Phase / Frequency Amps
Millivolt Not required 0
40 - 50 pounds
(18 – 23 kg)
SHIPPING INFORMATION PERFORMANCE CHARACTERISTICS
Shipping Weight Shipping Cube Shipping H x W x L
190 lb
86 kg
19 ft.³
.54 m³
45 ¼ x 18 ¾x 38 ½in
114.9 x 47.6 x 97.8 cm
Cooks 88 lbs (40 kg) of fries per hour
Frying Area 14 x 14 x 4 in
(35.6 x 35.6 x 10.2 cm)
SHORT FORM SPECIFICATION
Provide Pitco Model SG14 tube fired gas fryer. Fryer shall have an atmospheric burner system combined with four stainless steel
heat tubes utilizing high temperature alloy stainless steel baffles. Fryer shall have a deep cool zone; minimum 23% of total oil
capacity to trap burnt particles, crumbs and black specks. Fryer cooking area shall be 14” x 14” (35.6 cm x 35.6 cm) with a cooking
depth of 4” (10.2 cm). Heat transfer area shall be a minimum of 600 sq. inches (3,871 sq. cm). Provide accessories as follows:
TYPICAL APPLICATION
Frying a wide variety of foods in a limited amount of space. Frying that requires a high volume production rate.