Pixsys DRR227 User manual

DRR227
Controller / Regolatore
User manual / Manuale d’uso

User manual - DRR227 - 5
Introduction
Thank you for choosing a Pixsys controller.
With the DRR227 Pixsys model Pixsys makes available in a single device multiple
options related to sensor input and actuators command in addition to the extended
power range 24..230 Vac/Vdc. With the various selectable sensors and the output con-
gurable as relay or SSR command, the user or retailer can reduce stock by rationalising
investment and device availability
1 Safety guide lines
Read carefully the safety guidelines and programming instructions contained in
this manual before using/connecting the device. Disconnect power supply before
proceeding to hardware settings or electrical wirings. Only qualied personnel should
be allowed to use the device and/or service it and in accordance to technical data and
environmental conditions listed in this manual. Do not dispose electric tools together
with household waste material. In observance European Directive 2002/96/EC on
waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected
separately and returned to an environmentally compatible recycling facility.
2 Model Identication
Power supply 24..230 Vac/Vdc +/-15% 50/60 Hz – 5,5 VA
DRR227-12ABC 2 relays + 1 Out SSR + D.I.
DRR227-14ABC 3 Out SSR + 1 relays + D.I. + T.A.
3 Technical Data
3.1 General Features
Displays 4 0,40 inch displays + 4 0,30 inch displays
Operating tempera-
ture 0-45 °C - Humidity 35..95 uR%
Sealing IP65 front panel (with gasket)
IP20 box and terminals
Material PC ABS UL94VO self-extinguishing
Weight 130 g

6 - DRR227 - User manual
3.2 Hardware Features
Power supply 24..230 Vac/Vdc ±15%
50/60 Hz Consumption: 5.5 VA
Analogue input
1: AN1 Congurable via sof-
tware. Input: Thermocou-
ple type K, S, R, J, T, E, N, B.
Automatic compensation of
cold junction from 0..50°C.
Thermoresistance: PT100,
PT500, PT1000, Ni100,
PTC1K, NTC10K (β 3435K).
Input V/I: 0-10 V, 0-20 or
4-20 mA, 0-60 mV.
Pot. input: 6 kΩ, 150 kΩ
Tolerance (25 °C)
+/-0.3% ±1 digit (su F.s.) for ther-
mocouple, thermoresistance and
V / mA.
Cold junction accuracy 0.1 °C/°C
Impedence:
0-10 V: Ri>110 kΩ
0-20 mA: Ri<50 Ω
4-20 mA: Ri<50 Ω
0-60 mV: Ri>500 kΩ
Relay outputs
2relays.
Congurable as command
and/or alarm output
Contacts
5 A - 250 V~.
Resistive load
SSR output
1SSR.
Congurable as command
output and/or alarm output
+12Vdc ±15%/ 30mA
3.3 Software Features
Regulation
algorithms
ON-OFF with hysteresis.
P, P.I., PID, P.D. with proportional time
Proportional band 0..9999 °C o °F
Integral time 0,0..999,9 sec. (0 excluded)
Derivative time 0,0..999,9 sec. (0 excluded)
Controller functions
Manual or automatic Tuning, selectable alarm, protection of
command and alarm setpoints, activation of functions via
digital input

User manual - DRR227 - 7
4 Dimensions and Installation
72 mm 64 mm
90 mm
Attacco a guida DIN EN50022
Din rail mounting guide EN50022
Morsettiere Estraibili
Extractable terminal blocks
A 3 MAN TUN REM
C 1
C 2
A 1
A 2
Memory Card USB
(optional)
Cod. 2100.30.013
5 Electrical wirings
Although this controller was designed to resist electromagnetic interferences
in industrial environments, please observe following safety guidelines:
• Separatethecontrollinefromthepowerwires.
• Avoidproximityofremotecontrolswitches,electromagneticcontactors,powerful
engines and in all instances use specic lters.
• Avoidproximityofpowergroups,especiallythosewithphasecontrol.