Planet VGW-402 User manual

Internet Telephony Gateway
VGW-402 / VGW-400FS / VGW-400FO
Quick Installation Guide

Table of Contents
1. Package Contents ....................................................................................... 3
2. Hardware Installation.................................................................................. 4
2.1 Safety Instructions .............................................................................. 4
2.2 Physical Introduction............................................................................ 5
2.3 LED&Buttondenitions ...................................................................... 6
2.4 Placement........................................................................................... 7
2.5 Physical Connection ............................................................................. 7
3. BasicSystemConguration ......................................................................... 8
3.1 Web Login .......................................................................................... 8
3.2 ConguringtheNetworkSetting ........................................................... 9
3.3 Changing IP Address or forgotten admin password................................10
4. FurtherConguration .................................................................................11

3
1. Package Contents
Thank you for purchasing PLANET Internet Telephony Gateway, VGW-400 Series.
This Quick Installation Guide will introduce how to nish the basic setting of
connecting the web management interface and the Internet. Open the box of the
Internet Telephony Gateway and carefully unpack it. The box should contain the
following items:
VGW-400Seriesx1l
QuickInstallationGuidex1l
User’s Manual CD x 1
l
PowerAdapterx1(12V)l
RJ-45x1l
If any of the above items are damaged or missing, please contact your dealer
immediately.

4
2. Hardware Installation
The following are instructions for setting up PLANET VGW-400 Series. Refer to
the illustration and follow the simple steps below to quickly install your Internet
TelephonyGateway.
2.1 Safety Instructions
The following are the safety instructions for Internet Telephony Gateway systeml
before installing.
The maximum operating temperature of the VGW-400 Series is 0~45°C. Carel
mustbetakentoallowsufcientaircirculation.
The connections and equipment that supply power to the VGW-400 Seriesl
should be capable of operating safely with the maximum power requirements of
the VGW-400 Series. In the event of a power overload, the supply circuits and
supply wiring should be become hazardous.
The power adapter must plug into the right supply voltage. Make sure that the
l
supplied power voltage is correct and stable. If the input power voltage is over
10%lowerthanthestandard,itmaycausetheVGW-400Seriestomalfunction.
Generally, when installed after the nal conguration, the product must complyl
with the applicable safety standards and regulatory requirements of the country
inwhichitisinstalled.Ifnecessary,consultyourtechnicalsupport.

5
2.2 Physical Introduction
4321WAN LAN Proxy Status Power
VGW-400 Series
Internet Telephony Gateway
Front Panel of the VGW-400 Series
4
Reset
WAN LAN
DC 12V
321
FXO FXS
Rear Panel of the VGW-402
4
Reset
WAN LAN
DC 12V
3
FXS
2 1
Rear Panel of the VGW-400FS
4
Reset
WAN LAN
DC 12V
3
FXO
2 1
Rear Panel of the VGW-400FO

6
2.3 LED&Buttondenitions
LEDdenitions
LED Function Description
Power Whenthepoweradapterisconnected,theLEDwilllightup
green.
Status Whensystemstartsupsuccessfully,theLEDwilllightupgreen.
Proxy WhenthegatewayisregisteredsuccessfullytoaSIPProxy,this
will light up green.
WAN
ThisLEDlightsupgreenwhenthegateway’sWANportis
physically connected to the public internet. When data is
transmittedthroughthisport,itwillashgreen.
LAN
ThisLEDlightsupgreenwhenthegateway’sLANportis
physically connected to a local network (Refer to Rear Panel
section).Whendataistransmittedthroughthisport,itwillash
green.
Port1-4
The status LEDs for FXO and FXS ports will light up amber orange
whenconnectedphoneisengagedinaconversationmode(FXO).
Itwillashamberorangewhenthereisanincomingcall(FXS).
Buttondenitions
Port Function Description
Reset Press and hold over 5 seconds to reload factory default setting.
Thisactionwilleraseallexistingsettingsconguredonthis
gateway.
FXS Ports
The status LED for FXS port will light up amber orange when the
connectedphone’shandsetislifted,orwhentheconnectedphone
isengagedinaconversation.Itwillashamberorangewhen
there is an incoming call.
FXO Ports
The status LED for FXO port will blink to remind you that there is
noPSTNlineconnected.WhenPSTNlineisconnectedbutnotin
talkingmode,theLEDisOFF.Whenalineisusing,theLEDlights
up steadily.
LAN 10/100Base-TRJ-45socketforLANport,connectstoPCfor
management purpose.
WAN 10/100Base-TRJ-45socketforWANport,connectstowidearea
network.
12VDC Thepowersocket,inputAC100V~240V;output12VDC,2A

7
2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure.l
DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.l
DONOTobstructventilationslotsoneachsideoftheVGW-400Seriesorexposel
it todirectsunlight orotherheatsource.Besurethatthereisadequateairow
aroundtheVGW-400Series.
PlacetheVGW-400Seriesonaatsurfacetoavoidanydamage.l
2.5 Physical Connection
4
Reset
WAN LAN
DC 12V
321
FXO FXS
100Base-TX UTP
Telephone wire
Video Phone IP Phone PC
Switch
ATAIP PBX
Router
SLT Phone Fax
PSTN
Internet
Physical Connection Topology of the VGW-400 Series

8
3.BasicSystemConguration
3.1 Web Login
Step 1. Connect a computer to a LANportontheVGW-400Series.YourPCmust
besetto192.168.0.X,thesamedomainasthatoftheVGW-400Series.
Step 2. Start a web browser. To use the user interface, you need a PC with
InternetExplorer(version6andhigher),Firefox,orSafari(forMac).
Step 3. EnterthedefaultIP addressofthe VGW-400Series:192.168.0.1into the
URL address box.
Step 4. Enter the default user name admin and the default password admin,and
thenclickLogintoenterWeb-baseduserinterface.
(DefaultIP)
DefaultWANIP 172.16.0.1
Default subnet mask 255.255.255.0
DefaultGateway 172.16.0.254
Default PC IP 192.168.0.1
DefaultLoginUserName admin
Default Login Password admin
Login page of the VGW-400 Series

9
Note
For security reason, please change and memorize the new pass-
word after this first setup.
3.2 ConguringtheNetworkSetting
Step 1. GotoDeviceSettingNetwork
Network setting page
Step 2. EdityourWANportIPinformation.
TherearethreetypesofIPSupport.TheyareIPV4only,IPV4,IPV6andIPV6only.
There are also three types of WAN port connection. They are Static IP, PPPoE
(Point-to-Point Protocol over Ethernet) and DHCP. You can nd detailed setting
process in the user manual.

10
Selection of IP Support / Network Connection Type
3.3 Changing IP Address or forgotten admin password
Toreset the IPaddress tothedefaultIPaddress“192.168.0.1”(LAN)or resetthe
loginpasswordtodefaultvalue,presstheresetbuttononthefrontpanelformore
than 5 seconds.Afterthedeviceisrebooted,youcanloginthemanagementWeb
interface within the same subnet of 192.168.0.xx.
4
Reset
Reset Button
321
FXO FXS
Note
After pressing the “Reset” button, all the system data will be reset
todefault;ifpossible,backuptheconfigfilebeforeresetting.