Planet NVR-3685 User manual

3. Hardware Installation
Accessories Check
Accessories Pack
SATA CABLE x 8 pcs
M4 x 8 Flat Head Screws
(6 pcs)
6-32UNC Silver Screws
(32 pcs)
Screw Pack
HDD Installation
01 Remove all the screws from the cover
of the NVR. 02 Lift the cover up to remove it.
1
2
03 Remove the screws from the xed
plates of hard drives and case. 04 Take out xed plates 1 & 2 for hard
drives.
1
2
1. Packet Contents
VERIFY THE CONTENTS INSIDE THE PACKAGE BOX
The package should contain the following items plus the NVR-3685. If any item is missing or
damaged, please contact the seller immediately.
Quick Installation Guide x 1 Screw Packet x 1 SATA Cable x 8 Power Cord x 1 Rack Mount x 2
2. Physical Introduction
Front Panel
H.265 Network Video Recorder
Power, HDD, LAN, REC, Event, Alarm, CAM Status USB Port
DO Status
DI Status
Rear Panel
DI/DO
MIC. In
HDMI Power
Power Supply Switch
LAN1
LAN2
Audio Out
e-SATA
VGA Reset USB Port
Fan Power
- 1 - - 2 -

3. Hardware Installation
Accessories Check
Accessories Pack
SATA CABLE x 8 pcs
M4 x 8 Flat Head Screws
(6 pcs)
6-32UNC Silver Screws
(32 pcs)
Screw Pack
HDD Installation
01 Remove all the screws from the cover
of the NVR. 02 Lift the cover up to remove it.
1
2
03 Remove the screws from the xed
plates of hard drives and case. 04 Take out xed plates 1 & 2 for hard
drives.
1
2
1. Packet Contents
VERIFY THE CONTENTS INSIDE THE PACKAGE BOX
The package should contain the following items plus the NVR-3685. If any item is missing or
damaged, please contact the seller immediately.
Quick Installation Guide x 1 Screw Packet x 1 SATA Cable x 8 Power Cord x 1 Rack Mount x 2
2. Physical Introduction
Front Panel
H.265 Network Video Recorder
Power, HDD, LAN, REC, Event, Alarm, CAM Status USB Port
DO Status
DI Status
Rear Panel
DI/DO
MIC. In
HDMI Power
Power Supply Switch
LAN1
LAN2
Audio Out
e-SATA
VGA Reset USB Port
Fan Power
- 1 - - 2 -

3. Hardware Installation
Accessories Check
Accessories Pack
SATA CABLE x 8 pcs
M4 x 8 Flat Head Screws
(6 pcs)
6-32UNC Silver Screws
(32 pcs)
Screw Pack
HDD Installation
01 Remove all the screws from the cover
of the NVR. 02 Lift the cover up to remove it.
1
2
03 Remove the screws from the xed
plates of hard drives and case. 04 Take out xed plates 1 & 2 for hard
drives.
1
2
1. Packet Contents
VERIFY THE CONTENTS INSIDE THE PACKAGE BOX
The package should contain the following items plus the NVR-3685. If any item is missing or
damaged, please contact the seller immediately.
Quick Installation Guide x 1 Screw Packet x 1 SATA Cable x 8 Power Cord x 1 Rack Mount x 2
2. Physical Introduction
Front Panel
H.265 Network Video Recorder
Power, HDD, LAN, REC, Event, Alarm, CAM Status USB Port
DO Status
DI Status
Rear Panel
DI/DO
MIC. In
HDMI Power
Power Supply Switch
LAN1
LAN2
Audio Out
e-SATA
VGA Reset USB Port
Fan Power
- 1 - - 2 -

4. Web Management
Installing “Planet IP Wizard II” search utility from PLANET Website:
http://www.planet.com.tw/en/support/download.php?type1=8&model=48864&type=8184#list
1. Please go to Start Programs PLANET IP Wizard II PLANET IP Wizard II to
run the search tool. Then you will see the utility start searching the network.
2. The NVR should be located and its IP address should be displayed; double-click on it and
the program should automatically access the NVR’s web administration page from your
default browser.
3. Login the Homepage
The Web management allows you to
access and manage the Network Video
Recorder easily. Launch the Web browser
and then enter the IP address. The
default IP address is 192.168.0.20. And
ll out the User Name and Password to
login the Web management. The default
User Name and Password are both
admin.
Default IP Address: 192.168.0.20
Default Username: admin
Default Password: admin
5. Customer Support
You can browse our online FAQ resource and User’s Manual on PLANET Web site rst to
check if it could solve your issue. If you need more support information, please contact
PLANET surveillance support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
[e-mail]
NVR-3685 User’s Manual:
http://www.planet.com.tw/en/support/download.php?type1=8&model=48864&type=3#list
(Please select your NVR model name from the Product Model drop-down menu)
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective
owners.
11 Connect the SATA cable to the hard
drives. 12 Put the cover back.

1
2
2
1
13 Assemble all the screws to the case. 14 Latch the rack mounting ears on the
case with screws.

15 The HDDs have been completely
assembled.
05 Install the hard drives on the xed
plates with screws. 06 First place back the bottom xed plates
of hard drives.

07 Latch the xed plates of hard drives
and case with screws. 08 Place back the top xed plates of hard
drives on the other.
09 Latch the xed plates of hard drives
and case with screws. 10 Connect the power cable to the hard
drives.
- 3 - - 4 - - 5 - - 6 -

4. Web Management
Installing “Planet IP Wizard II” search utility from PLANET Website:
http://www.planet.com.tw/en/support/download.php?type1=8&model=48864&type=8184#list
1. Please go to Start Programs PLANET IP Wizard II PLANET IP Wizard II to
run the search tool. Then you will see the utility start searching the network.
2. The NVR should be located and its IP address should be displayed; double-click on it and
the program should automatically access the NVR’s web administration page from your
default browser.
3. Login the Homepage
The Web management allows you to
access and manage the Network Video
Recorder easily. Launch the Web browser
and then enter the IP address. The
default IP address is 192.168.0.20. And
ll out the User Name and Password to
login the Web management. The default
User Name and Password are both
admin.
Default IP Address: 192.168.0.20
Default Username: admin
Default Password: admin
5. Customer Support
You can browse our online FAQ resource and User’s Manual on PLANET Web site rst to
check if it could solve your issue. If you need more support information, please contact
PLANET surveillance support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
[e-mail]
NVR-3685 User’s Manual:
http://www.planet.com.tw/en/support/download.php?type1=8&model=48864&type=3#list
(Please select your NVR model name from the Product Model drop-down menu)
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective
owners.
11 Connect the SATA cable to the hard
drives. 12 Put the cover back.

1
2
2
1
13 Assemble all the screws to the case. 14 Latch the rack mounting ears on the
case with screws.

15 The HDDs have been completely
assembled.
05 Install the hard drives on the xed
plates with screws. 06 First place back the bottom xed plates
of hard drives.

07 Latch the xed plates of hard drives
and case with screws. 08 Place back the top xed plates of hard
drives on the other.
09 Latch the xed plates of hard drives
and case with screws. 10 Connect the power cable to the hard
drives.
- 3 - - 4 - - 5 - - 6 -

4. Web Management
Installing “Planet IP Wizard II” search utility from PLANET Website:
http://www.planet.com.tw/en/support/download.php?type1=8&model=48864&type=8184#list
1. Please go to Start Programs PLANET IP Wizard II PLANET IP Wizard II to
run the search tool. Then you will see the utility start searching the network.
2. The NVR should be located and its IP address should be displayed; double-click on it and
the program should automatically access the NVR’s web administration page from your
default browser.
3. Login the Homepage
The Web management allows you to
access and manage the Network Video
Recorder easily. Launch the Web browser
and then enter the IP address. The
default IP address is 192.168.0.20. And
ll out the User Name and Password to
login the Web management. The default
User Name and Password are both
admin.
Default IP Address: 192.168.0.20
Default Username: admin
Default Password: admin
5. Customer Support
You can browse our online FAQ resource and User’s Manual on PLANET Web site rst to
check if it could solve your issue. If you need more support information, please contact
PLANET surveillance support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
[e-mail]
NVR-3685 User’s Manual:
http://www.planet.com.tw/en/support/download.php?type1=8&model=48864&type=3#list
(Please select your NVR model name from the Product Model drop-down menu)
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective
owners.
11 Connect the SATA cable to the hard
drives. 12 Put the cover back.

1
2
2
1
13 Assemble all the screws to the case. 14 Latch the rack mounting ears on the
case with screws.

15 The HDDs have been completely
assembled.
05 Install the hard drives on the xed
plates with screws. 06 First place back the bottom xed plates
of hard drives.

07 Latch the xed plates of hard drives
and case with screws. 08 Place back the top xed plates of hard
drives on the other.
09 Latch the xed plates of hard drives
and case with screws. 10 Connect the power cable to the hard
drives.
- 3 - - 4 - - 5 - - 6 -

4. Web Management
Installing “Planet IP Wizard II” search utility from PLANET Website:
http://www.planet.com.tw/en/support/download.php?type1=8&model=48864&type=8184#list
1. Please go to Start Programs PLANET IP Wizard II PLANET IP Wizard II to
run the search tool. Then you will see the utility start searching the network.
2. The NVR should be located and its IP address should be displayed; double-click on it and
the program should automatically access the NVR’s web administration page from your
default browser.
3. Login the Homepage
The Web management allows you to
access and manage the Network Video
Recorder easily. Launch the Web browser
and then enter the IP address. The
default IP address is 192.168.0.20. And
ll out the User Name and Password to
login the Web management. The default
User Name and Password are both
admin.
Default IP Address: 192.168.0.20
Default Username: admin
Default Password: admin
5. Customer Support
You can browse our online FAQ resource and User’s Manual on PLANET Web site rst to
check if it could solve your issue. If you need more support information, please contact
PLANET surveillance support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
[email protected]
NVR-3685 User’s Manual:
http://www.planet.com.tw/en/support/download.php?type1=8&model=48864&type=3#list
(Please select your NVR model name from the Product Model drop-down menu)
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective
owners.
11 Connect the SATA cable to the hard
drives. 12 Put the cover back.

1
2
2
1
13 Assemble all the screws to the case. 14 Latch the rack mounting ears on the
case with screws.

15 The HDDs have been completely
assembled.
05 Install the hard drives on the xed
plates with screws. 06 First place back the bottom xed plates
of hard drives.

07 Latch the xed plates of hard drives
and case with screws. 08 Place back the top xed plates of hard
drives on the other.
09 Latch the xed plates of hard drives
and case with screws. 10 Connect the power cable to the hard
drives.
- 3 - - 4 - - 5 - - 6 -

3. Hardware Installation
Accessories Check
Accessories Pack
SATA CABLE x 8 pcs
M4 x 8 Flat Head Screws
(6 pcs)
6-32UNC Silver Screws
(32 pcs)
Screw Pack
HDD Installation
01 Remove all the screws from the cover
of the NVR. 02 Lift the cover up to remove it.
1
2
03 Remove the screws from the xed
plates of hard drives and case. 04 Take out xed plates 1 & 2 for hard
drives.
1
2
1. Packet Contents
VERIFY THE CONTENTS INSIDE THE PACKAGE BOX
The package should contain the following items plus the NVR-3685. If any item is missing or
damaged, please contact the seller immediately.
Quick Installation Guide x 1 Screw Packet x 1 SATA Cable x 8 Power Cord x 1 Rack Mount x 2
2. Physical Introduction
Front Panel
H.265 Network Video Recorder
Power, HDD, LAN, REC, Event, Alarm, CAM Status USB Port
DO Status
DI Status
Rear Panel
DI/DO
MIC. In
HDMI Power
Power Supply Switch
LAN1
LAN2
Audio Out
e-SATA
VGA Reset USB Port
Fan Power
- 1 - - 2 -