Planet EPL-2000 User manual

EPL-2000
GEPON OLT
(2-PON Interface, 2 x GbE SFP, 1 x MGT Port)
Quick Installation Guide

Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. MySQL Server Installation ........................................................................... 5
4. PL-EMS Installation ....................................................................................14
5. Starting PL-EMS Management .....................................................................17
6. Customer Support .....................................................................................19

3
1. Package Contents
Thank you for purchasing PLANET GEPON OLT EPL-2000. The term “GEPON OLT”
refers to the Switch mentioned in this Quick Installation Guide.
The box should contain the following items:
zThe GEPON OLT x 1
zThe MGB-PX20 SFP Transceiver x 2
zThe Quick Installation Guide x 1
zUser’s Manual CD x 1
zPower Cord x 1
zTwo Rack-mounting Brackets with Attachment Screws x 1 (Set)
If any item is found missing or damaged, please contact your local reseller for
replacement.

4
2. Requirements
The GEPON OLT provides a GUI utility to manage the system; the following
equipment is necessary for further management:
Subscriber PC is installed with Ethernet NIC (Network Card)
MySQL Software (Windows Platform) http://dev.mysql.com/
EMS Software (Windows Platform)
Management Port connection
zNetwork cables - Use standard network (UTP) cables with RJ45 connectors
PON Port connection
zFiber Transceiver - Slot with a 1000BASE-PX20 SFP PON transceiver
zFiber Cable - Use single mode of ber (SC) cabl

5
3. MySQL Server Installation
Install the MySQL software with the purpose of saving equipment’s alarm message,
administrator message, system log, etc.
1. Please visit MySQL ofcial website http://dev.mysql.com/ and download
MySQL-Essential-5.1.73-win32.msi or MySQL-Essential-5.1.73-win64.msi for the
Windows system.
2. Once the Setup program starts running, please click the “Next” button for
starting installation.
Figure 3-1 MySQL Installation Screen

6
3. The Setup Type window appears; the default is “Typical” mode. Please click the
“Next” button.
Figure 3-2 Setup Type Screen
4. The “Ready to Install the Program” window appears; please click the “Install”
button.
Figure 3-3 Begin Installation Wizard Screen

7
5. When the installation is done, the “MySQL Enterprise” window appears. Please
click the “Next” button.
Figure 3-4 MySQL Enterprise Screen
6. The “Wizard Completed” window appears, and it will ask for Congure the
MySQL server and Register the MySQL Server now. Please click the “Finish”
button.
Figure 3-5 Wizard Completed Screen

8
7. The “MySQL Server Instance Conguration Wizard” window appears; please click
the “Next” button.
Figure 3-6 MySQL Conguration Wizard Screen
8. The “MySQL Server Instance Conguration” window appears; keep the default
setting of “Detailed Conguration” and click the “Next” button.
Figure 3-7 MySQL Server Instance Conguration (1) Screen

9
9. Please select a Server type. Keep the default setting of “Developer Machine” and
click the “Next” button.
Figure 3-8 MySQL Server Instance Conguration (2) Screen
10. Please select the database usage. Keep the default setting of “Multifunctional
Database” and click the “Next” button.
Figure 3-9 MySQL Server Instance Conguration (3) Screen

10
11. Choose where you want to place the InnoDB Datale. Here is the remaining
default setting. Please click the “Next” button.
Figure 3-10 MySQL Server Instance Conguration (4) Screen
12. Please set the approximate number of concurrent connections. Keep the default
setting of “Decision Support (DSS)/OLAP and click the “Next” button.
Figure 3-11 MySQL Server Instance Conguration (5) Screen

11
13. Please set the Network options and Server SQL mode. Keep the default setting
and click the “Next” button.
Figure 3-12 MySQL Server Instance Conguration (6) Screen
14. Please Select the default character set. Keep the default setting of “Standard
Character Set” and click the “Next” button.
Figure 3-13 MySQL Server Instance Conguration (7) Screen

12
15. Please set the Windows options. Keep default setting and click the “Next”
button.
Figure 3-14 MySQL Server Instance Conguration (8) Screen
16. Please set the security options. Type the password “1234” for current root and
new root. Click the “Next” button.
Figure 3-15 MySQL Server Instance Conguration (9) Screen

13
17. Please click the “Execute” button for starting the conguration.
Figure 3-16 MySQL Server Instance Conguration (10) Screen
18. Please give a check to “Conguration le created”, “Windows service MySQL
installed”, “Service started successfully” and “Security settings applied”, and
then click the “Finish” button.

14
4. PL-EMS Installation
1. Insert the bundled CD disk into the CD-ROM drive to launch the autorun
program. Once completed, a welcome menu screen will appear. Click the
“PL-EMS” hyperlink, the InstallShield Wizard dialog box will appear below.
2. Once the Setup program starts running, please click the “Next” button for
starting installation.
Figure 4-1 PL-EMS Setup Wizard Screen

15
3. During the installation, it will ask for the place to put the PL_EMS folder.
Figure 4-2 PL-EMS Folder Installation Screen
4. Click “Install” for starting installation.
Figure 4-3 PL-EMS Installation Screen

16
5. Click the “Finish” button for completing the EMS Setup.
Figure 4-4 PL-EMS Installation Completing Screen
6. When the PL-EMS installation is done, two icons -- PL Server and PL Client – will
appear on the desktop.

17
5. Starting PL-EMS Management
Figure 5-1 IP Management Diagram
The following shows how to start-up the PL-EMS Management of the GEPON OLT.
Please note the GEPON OLT is congured through an Ethernet connection, making
sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the GEPON OLT is 192.168.1.10 (the
factory-default IP address), then the manager PC should be set to 192.168.1.x
(where x is a number between 1 and 254, except 10), and the default subnet
mask is 255.255.255.0.
Login the GEPON OLT
1. Double-click the PL Server icon on the PC desktop. After a couple of seconds, it
will appear on the lower-right corner of the system tray.
Figure 5-2 PL Server Icon

18
2. Double-click the PL Client icon on the PC desktop. It will pop-up a window
to enter the user name and password. Please enter the default user name
“admin” and password “admin”. The login screen in Figure 5-3 appears.
Figure 5-3 PL Client Icon and Login Window
3. After entering the user name and password, the PL-EMS utility main screen will
appear as in Figure 5-4.
Figure 5-4 Main Screen of EPL-2000 GEPON OLT

19
6. Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ
resource on the PLANET Website rst to check if it could solve your issue. If you
need more support information, please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[email protected]

Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their
respective owners.