Planet FNSW-4800 User manual

48-Port 10/100Mbps Fast Ethernet Switch
Key Feature
Data Sheet
1
The Planet's FNSW-4800 is a 48-Port 10/100Mbps Fast Ethernet switch,
perfectly designed for low cost, high performance, and easy installation,
the PLANET 48-Port 10/100Base-TX Fast Ethernet Switch in your best
choice of switched networks.
With increasing bandwidth requirements for local area networks, PLANET's
FNSW-4800 Fast Ethernet Switch is the ideal option to alleviate bottlenecks
in Client / server and peer-to-peer environments in a cost-effective way.
The switch provides a combination of 48 Fast Ethernet Switching ports that
provide users with high-speed network connections.
With it's Auto-Negotiation capability, all the RJ-45/STP ports of FNSW-4800
can be configured to speeds of 10/20Mbps or 100/200Mbps automatically.
In addition, the product is equipped with the MDI/MDI-X auto detection
for easily plug and play connection, regardless of cabling types-straight
through or crossover.
The high-performance throughput at filtering / forwarding rate is up to
14880 packets per second in 10Mbps, and 148800 packets per second in
100Mbps. Along with its dynamic shared memory buffer, the FNSW-4800
can boost bandwidth, eliminate unnecessary traffic and relieve congestion
on your critical server path.
FNSW-4800
• Comply with IEEE 802.3 and IEEE 802.3u standards for
10/100Base-TX
• 48-Port 10/100Mbps Fast Ethernet Switch
• Each Switching ports support auto-negotiation-10/20,
100/200Mbps supported
• Auto-MDI/MDI-X detection on each RJ-45 port
• Prevents packet loss with back pressure (half-duplex) and
802.3x PAUSE frame flow control (full-duplex)
• High performance Store and Forward architecture, broadcast
storm control, runt/CRC filtering eliminates erroneous packets
to optimize network bandwidth
• 8K MAC address table, automatic source address learning
and ageing
• 2.5Mbit embedded memory for packet buffers
• Support up to 1522 bytes packet and 802.1Q VLAN
transparent
• 19-inch rack mount size
• Internal full-range power supply suitable for worldwide use
• EMI standards comply with FCC, CE class A

PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property or
their respective owners. Copyright©2006 PLANET Technology Corp. All rights reserved.
09-06 C-FNSW4800-2
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan R.O.C.
Tel: [phone] Fax: [phone]
Email: [email protected] www.planet.com.tw
VoIP Gateway: vip.planet.com.tw
48-Port 10/100Mbps Fast Ethernet Switch
FNSW-4800
48-Port 10/100Mbps Fast Ethernet Switch
Product
Specification
Applications
Ordering Information
2
Model
Hardware Specification
Ports
Switch Processing Scheme
Throughput (packet per second)
Switch fabric
Address Table
Share data Buffer
Flow Control
Dimensions
Weight
Power Requirement
Power Consumption / Dissipation
Temperature
Humidity Operating:
Standards Conformance
Regulation Compliance
Standards Compliance
FNSW-4800
48 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
Store-and-forward
6.6Mpps
8.8Gbps
8K entries
2.5Mbit
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
440 x 260 x 44 mm, 1U height
3.11kg
100~240V AC, 50-60 Hz, 0.6A
18 Watts maximum / 61 BTU / hr maximum
Operating: 0~50 Degree C, Storage -40~70 Degree C
10% to 90%, Storage: 5% to 95% (Non-condensing)
Standards Conformance
FCC Part 15 Class A, CE
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet),
IEEE 802.3x (full-duplex flow control)
Workgroup Switch
With up to 8.8Gbps switching fabric, the FNSW-4800 can easily have the high bandwidth Fast Ethernet network backbone or your
workgroup's backbone.
Department Switch
Uplink directly using any straight or crossover cable to the backbone switch provides the connective to back plane yet segment the
network traffic of the department to your backbone.
Data Sheet
FNSW-4800