Planet FWA-2100-NR User manual

Industrial 5G NR Outdoor Unit (ODU)
FWA-2100-NR
Quick Installation Guide

Table of Contents
1. Package Contents................................................................................. 3
2. Requirement ........................................................................................ 4
3. Hardware Installation............................................................................ 5
3.1 SIM Card Installation ..................................................................... 5
3.2 Wiring the Ethernet Cable Installation.............................................. 6
3.3 Wall Hanging and Pole Mounting Installation ..................................... 7
4. Starting Web Management .................................................................... 9
5. RecoveringBacktoDefaultConguration ............................................. 12
6. Discovery through PLANET NMS Controller............................................ 13
7. Customer Support .............................................................................. 14

3
1. Package Contents
Thank you for purchasing PLANET Industrial 5G NR Cellular Outdoor Unit,
FWA-2100-NR. The description of this model is as follows:
Model Name Description
FWA-2100-NR Industrial 5G NR Outdoor Unit (ODU) with 1-port Gigabit
PoE PD
“5G ODU” is used as an alternative name in this Quick Installation Guide.
Open the box of the 5G ODU and carefully unpack it. The box should contain
the following items:
5G ODU x 1 QR Code Sheet Wall Bracket and Base x 1
Let’s get started with your PLANET product
FWA-2100-NR
EN Please scan the QR code to browse our online User’s Manual or Quick
Installation Guide and follow the instructions to complete the setup.
Quick
Installation
DE
Bitte scannen Sie den QR Code sie werden per Browser zur
Bedienungsanleitung oder Schnellanleitung weiter geleitet. Folgen Sie den
Anweisungen um die Installation abzuschließen.
FR
Veuillez scanner le code QR pour obtenir notre Notice d’Utilisation en
ligne ou notre Guide d’Installation Rapide et suivez les instructions pour
compléter la conguration
ES
Escanee el código QR para encontrar el Manual del Usuario en línea o
la Guía de Instalación Rápida y siga las instrucciones para completar la
conguración.
IT Scansiona il codice QR per consultare online il Manuale utente o la Guida di
installazione rapida e segui le istruzioni per completare la congurazione.
PT Por favor, escaneie o QR code para navegarno Manual do Usuário ou Guia
de Instalação Rápida. Siga as instruções para completar a conguração.
PL
Zeskanuj kod QR, aby otworzyć naszą internetową instrukcję obsługi
lub instrukcję szybkiej instalacji. Postępuj zgodnie z instrukcjami, aby
zakończyć poprawną kongurację.
RU
One word modify: Отсканируйте QR-код, чтобы просмотреть наше
онлайн-руководство пользователя или руководство по быстрой
настройке, и следуйте инструкциям для завершения настройки
RO Te rugam sa scanezi codul QR, pentru a descarca User’s Manual sau Quick
Installation Guide si a urmari instructiunile necesare in nalizarea instalarii
AR
Need more help?
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Technical Support: [email protected]
Copyright © PLANET Technology Corp. 2023.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Part No. 2341-B90570-000
EU Wireless Use Restriction
This device is restricted to indoor use
when operating in the 5150 to 5350
MHz freguency range. This restriction
applies in: AT, BE, BG, CH, C Y, CZ, DE,
DK, EE, EL, ES, FI, FR, HR, HU, IE, IS,
IT, LI, LT, LU, L V, M T, NL, NO, PL, P T,
RO, SE, SI, SK, TR, UA.
RJ45 Wall-mounted Kit x 1 Pole Clamp x 1
Wired Waterproof Kit x 2 Waterproof Rubber Stopper
If any item is found missing or damaged, please contact your local reseller for
replacement.

4
2. Requirement
zWorkstations running Windows 10/11, MAC OS X or later, Linux, UNIX, or
other platforms are compatible with TCP/IP protocols.
zWorkstations are installed with Ethernet NIC (Network Interface Card)
zEthernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45 connec-
tors.
The above PC is installed with Web browser and JAVA runtime environ-
ment plug-in.
It is recommended to use Chrome 98.0.xx to access the Cellular
Gateway. If the Web interface of the 5G ODU is not accessible,
please turn off the anti-virus software or firewall and then try it
again.
Using either a PoE injector, a PoE switch, or a DC adapter (12V,
1.5A) for power supply ensures the device functions properly.
Please note that these power supplies are not included in the
package.

5
3. Hardware Installation
Refer to the illustration and follow the simple steps below to quickly install
your 5G ODU.
3.1 SIM Card Installation
A. Unscrew the two screws on the device’s cover to remove the cover.
B. Insert the SIM card as directed by the SIM card interface.
SIM 2
SIM 1

6
C. Put back the device’s cover and tighten the screws.
A Nano SIM card with 5G NR and 4G LTE subscription
3.2 Wiring the Ethernet Cable Installation
By following the steps in the picture from left to right, put the network cable
into the waterproof connector, and tighten the connector. Plug the cable into
the device’s LAN port, and tighten the waterproof connector with the device.
Plug the other end of the network cable into the PoE port of the PoE switch to
nishtheinstallation.
Please make sure that the waterproof connector is securely
fastened with 5G ODU to prevent internal water seepage.

7
3.3 Wall Hanging and Pole Mounting Installation
Wall hanging
Step 1: Lock the base to the device.
Step 2: Connect the wall bracket to the base and fasten the screws.
Step 3: Drill 4 holes with a 3mm diameter on the wall. The horizontal and
vertical distances between the 2 holes are 69.5mm and 45mm,
respectively.
Step 4: Place four anchors inside the hole by hammering them. Then screw
the four screws leaving a space of 2mm apart as shown in the
circled diagram below.
1 2

8
Step 5: The switch, shown in the picture below, can now be hung on the
wall.
1Place against a wall
2Hang up
3mm Screw
4G/5G
45mm
69.5mm
Pole mounting
To install the base and wall bracket, refer to Step 1 and Step 2 in Device
Installation (Wall Hanging).
Step 6: The pole clamp goes through the hole of the wall bracket, and is
wrappedaroundthepole.Tonishtheinstallation,fastentheclamp.

9
4. Starting Web Management
The following shows how to start up the Web Management of the 5G ODU.
Note the 5G ODU is congured through an Ethernet connection. Please make
sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the 5G ODU is 192.168.1.1, then the
manager PC should be set to 192.168.1.x (where x is a number between 2
and 254), and the default subnet mask is 255.255.255.0.
PC/Workstation with Web
Browser 192.168.1.x
PoE Switch/Injector
PoE
Figure 4-1: IP Management Diagram
The DHCP server of the Cellular Gateway is enabled. Therefore,
the LAN PC will get IP from the Cellular Gateway.

10
Logging in to the Cellular Gateway
1. Use Chrome 98.0.xx or above Web browser and enter IP address
http://192.168.1.1 (the factory default IP address or the one that you
have just changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default user name
“admin” and password “admin” (or the password you have changed
before) as shown in Figure 4-2.
Default IP Address: 192.168.1.1
Default User Name: admin
Default Password: admin
Default SSID (2.4G): PLANET_2.4G
Figure 4-2: Login Screen

11
3. After entering the password, the main screen appears as shown in Figure
4-3.
Figure 4-3: Web-based Main Screen of Cellular Gateway
Now, you can use the Web management interface to continue the Cellular
Gateway management or manage the Cellular Gateway by console interface.
Please refer to the user’s manual for more.

12
5.RecoveringBacktoDefaultConguration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address “192.168.1.1” or reset the
login password to default value, press the hardware reset button on the rear
panel for about 15 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.1.xx.
802.3at PoE+ LAN
Reset button
Dual Nano SIM Card Slot
Figure 5-1: FWA-2100-NR Reset Button

13
6. Discovery through PLANET NMS Controller
(NMS-500/NMS-1000V)
The FWA-2100-NR is the IP-based switched power manager, which can be
centrally monitored by PLANET NMS Controller.
Follow the steps below to discover the managed FWA-2100-NR through
PLANET NMS controller (NMS-500/NMS-1000V). Please ensure each managed
FWA-2100-NR uses a dierent static IP in the same subnet before physically
connecting to the managed network.
Please regularly check PLANET website for the latest compatible
list of the controller FWA-2100-NR in each firmware version.
Step 1. Launch the Web browser (Google Chrome is recommended.) and
enter the default IP address https://192.168.1.100:8888 of the NMS
controller. Then, enter the default username and password “admin”
to log on to the system.
*ThesecureloginwithSSL(HTTPS)prexisrequired.
Step 2. Go to the “Domain” page to discover and add the managed
FWA-2100-NR to the device list. Then, you can search and add them
and go to the “Device List” and “Topology View” page to monitor
the FWA-2100-NR.

14
7. Customer Support
You can browse our online FAQ resource and User’s Manual on PLANET Web
site rst to check if it could solve your issue. If you need more support
information, please contact PLANET support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq.
php?method=keyword&keyword=FWA-2100-NR
Support team mail address:
[email protected]
FWA-2100-NR User’s Manual:
https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword
=FWA-2100-NR&view=3#list
(Please select your model name from the drop-down menu of Product Models.)
Copyright © PLANET Technology Corp. 2024.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.