Planet SG-4800 User manual

Gigabit SSL VPN Security Router
SG-4800
Quick Installation Guide

Table of Contents
1. Package Contents ....................................................................................... 3
2. Hardware Installation .................................................................................. 4
2.1 Safety Instruction ................................................................................ 4
2.2 Front panel ......................................................................................... 4
2.3 LED&Buttondenition........................................................................ 5
2.4 Placement........................................................................................... 5
2.5 Network Connection............................................................................. 6
3. BasicSystemConguration ......................................................................... 7
3.1 Web Login .......................................................................................... 7
3.2 ConguringtheWAN ........................................................................... 8
3.3 Remote Management ..........................................................................10
4. Furtherconguration..................................................................................12

3
1. Package Contents
Thank you for purchasing PLANET Gigabit Multi-Homing VPN Security Router, SG-
4800,andthisQuickInstallationGuidewillintroducehowtonishthebasicsetting
to connect the internet. Open the box of the VPN Security Router and carefully
unpackit.Theboxshouldcontainthefollowingitems:
SG-4800x1l
QuickInstallationGuidex1l
User’sManualCDx1l
PowerCordx1l
Cat5Cablex1l
19inchesBracketsx2l
BracketScrewx8l
If any of above items are damaged or missing, please contact your dealer
immediately.

4
2. Hardware Installation
The followings are instructions for setting up PLANET SG-4800. Refer to the
illustration and follow the simple steps below to quickly install your VPN Security
Router.
2.1 Safety Instruction
ThefollowingisthesafetyinstructionsforVPNSecurityRouterbeforeinstalling.
Themaximumoperatingtemperatureofthe routeris50ºC.Care must be taken
toallowsufcientaircirculation.
The connections and equipment that supply power to the router should be
capableofoperatingsafelywiththemaximumpowerrequirementsoftherouter.
In the event of a power overload, the supply circuits and supply wiring should
notbecomehazardous.
The AC power cord must plug into the right supply voltage. Make sure that the
supplied AC voltage is correct and stable. If the input AC voltage is over 10%
lowerthanthestandardmaycausetheroutertomalfunction.
Generally, when installed after the nal conguration, the product must comply
with the applicable safety standards and regulatory requirements of the country
inwhichitisinstalled.Ifnecessary,consultfortechnicalsupport.
2.2 Front panel
Figure 2-1 Front Panel of the SG-4800
Power Indicator:Lightsupwhenthepowerison.
DIAG Indicator:Glitterswhensystemisonself-testafterpoweronthedevice.
Ethernet Port can be set as a:
LAN Port:lTheSecurityRoutersupports8LANport.
WAN Port:lTheSecurityRoutersupports4WANports.
DMZ Port:lTheSecurityRoutersupports1DMZport.

5
2.3 LED&Buttondenition
LED Color Status Description
PWR Green Steady PowerOn
Off Off PowerOff
DIAG Amber
SteadyOn Systemiscrashed.
Blinking Systemisonself-testafterpoweronthe
device.
Off System is ready.
WAN/DMZ
LINK/ACT Green
SteadyOn Porthasbeenconnected&getsIP.
Blinking Transmit data.
Off NotgettheIPaddress,eventheporthas
been connected.
LAN
LINK/ACT Green SteadyOn LANporthasbeenconnected.
Blinking Transmit data.
LAN/
WAN/DMZ
Speed
Green SteadyOn Works on 1000Mbps.
Amber SteadyOn Works on 100Mbps.
Off Off Works on 10Mbps.
Button Action Description
Reset
Press for 5 Secs Warm Start
DIAGindicator:AmberLEDashingslowly.
PressOver10Secs Factory Default
DIAGindicator:AmberLEDashingquickly.
2.4 Placement
Makesurethedeviceisplacedinasafeenvironmenttoavoidequipmentfailure.
DONOTplaceanythingontopofthedevice.Excessiveweightcoulddamageit.l
DO NOT obstruct ventilation slots on each side of the router or expose it tol
direct sunlight or other heat source. Be sure that there is adequate air ow
aroundtherouter.
Placetherouteronaatsurfacetoavoidanydamage.l

6
2.5 Network Connection
SSL VPN Tunnel
Modem
ADSL
PC SG-4800
Vendor
Headquarters Action Office
Branch Offices
Mail-ServerWeb-Server
DMZ
Access Point
Firewall GatewayFirewall Gateway
Modem
Modem
Modem
PC
PC Group
PC
PC
Laptop
Firewall Firewall
ADSL
ADSL
a/n
PPTP VPN Tunnel
IPSec VPN Tunnel IPSec VPN Tunnel
ADSL 2/2+
ADSL
VDSL2
VDSL2
100Base-TX UTP
1000Base-T UTP
5GHz 802.11a/n
a/n
VDSL2VDSL2
Action Office
Internet
Finance-Server
Figure 2-2 Topology of the SG-4800

7
3.BasicSystemConguration
3.1 Web Login
Step 1. Connect a computer to a LAN port on the router. Your PC (DHCP client
mode) will obtain an IP address automatically. (It is usually in the
192.168.1.xrange.)
Step 2. Start a web browser. To use the user interface, you need a PC with
InternetExplorer(version6andhigher),Firefox,orSafari(forMac).
Step 3. Enter the default IP address of the router: 192.168.1.1 into the URL
addressbox.
Step 4. Enterthedefaultusernameadminandthedefaultpasswordadmin.Then
clickLogintoenterWeb-baseduserinterface.
Figure 3-1 Login page of the SG-4800
DefaultLANIP:192.168.1.1
DefaultName:admin
DefaultPassword:admin

8
3.2 ConguringtheWAN
Step 1. GotoNetwork NetworkConnectiontondWAN Setting.
Figure 3-2 Network connection button
Figure 3-3 Multi-WAN interface setting page

9
Step 2. ClickEdittoenterWANcongurationpage.
Figure 3-4 WAN conguration page
There are six types of WAN connection. They are Obtain an IP automatically,
Static IP, PPPoE (Point-to-Point Protocol over Ethernet), PPTP (Point-to-Point
Tunneling Protocol), Transparent Bridge or Router Plus NAT Mode. Users
can choose according to their actual network structure. You can nd detail setting
processintheusermanual.
Figure 3-5 WAN connection type selection item

10
3.3 Remote Management
Thefunctioncanenableuserstomanagethesecurityrouteratremotesitesandto
allowtechnicalpersontoassistyouinsolvingnetworkproblem.
Step 1. GotoFirewall General Policy.
Figure 3-6 The rewall setting button
Figure 3-7 General Policy setting page
Step 2. Click Enable to active Remote Management. And then enter the control
portyouwanttouse.Thedefaultvalueis8080.
Step 3. Click Applytosavetheconguration.Andyoucantypethehttp://WAN
IP address: 8080toaccesstherouterfromtheremoteside.