Planet FSD-1604 User manual

16-Port 10/100Mbps
Desktop Fast Ethernet Switch
FSD-1604
User’s Manual

Table of Contents
1. Package Contents ............................................................. 3
2. Product Features............................................................... 4
2.1 Switch Front Panel ...................................................... 5
2.2 LED Indicators ............................................................ 5
2.3 Switch Rear Panel ....................................................... 5
2.4 Installing the FSD-1604............................................... 6
3.ProductSpecications ....................................................... 9
4. Customer Support .......................................................... 10

3
1.Package Contents
Check the contents of your package for following parts:
FSD-1604 x 1 DC 5V, 1A Power
Adapter x 1
User’s Manual x 1
If any of these are missing or damaged, please contact your
dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the
product in case there is a need to return it to us for repair.

4
2.Product Features
RJ-45 Interface
16-Port 10/100Mbps Fast Ethernet portsl
Comply with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TXl
Switching
Hardware based 10/100Mbps Auto-Negotiation and Autol
MDI/MDI-X
Features Store-and-Forward mode with wire-speed lteringl
and forwarding rates
Flow control for Full Duplex operation and back pressure forl
Half Duplex operation
Integrates address look-up engine, supporting 8K absolutel
MAC addresses
2Mbit SRAM Packet Bufferl
Switch Fabric: 3.2Gbps, Switch Throughput: 2.38Mppsl
Automatic address learning and address agingl
Comply with CSMA/CD protocoll
Hardware
Plastic shape and Desktop size, wall mount designedl
LED indicators for system Power, per port Link / Actl
Supports to handle up to 1522bytes packetl
External DC 5V, 1A Power Adapterl
One power on/off button for energy savingl
FCC Class B, CE compliantl

5
2.1 Switch Front Panel
Figure 1-1 shows a front panel of FSD-1604.
Power
246810 12 14 16
1357911 13 15
ACTLNK
FSD-1604
16-Port 10/100Mbps Desktop Switch
Figure 1-1: FSD-1604 Front Panel
2.2 LED Indicators
FSD-1604
LED Color Function
PWR Green Lit: Power on.
LNK/ACT Green
Lit: indicate the link through that port is
successfully established at 10/100Mbps.
Blink: indicate that the Switch is actively
sending or receiving data over that port.
2.3 Switch Rear Panel
Figure 1-2 shows a rear panel of FSD-1604.
1 61 41 21 08642
1 51 31 197531 Powe r O N / O F F
Figure 1-2: FSD-1604 Rear Panel

6
Power
Notice
1. The device is a power-required device, it
means, it will not work till it is powered. If
your networks should active all the time, please
consider using UPS (Uninterrupted Power
Supply) for your device. It will prevent you
from network data loss or network downtime.
2. In some area, installing a surge suppression
device may also help to protect your Switch
from being damaged by unregulated surge or
current to the Switch or the power adapter.
2.4 Installing the FSD-1604
This part describes how to install your FSD-1604 and make
connections to it. Please read the following topics and perform
the procedures in the order being presented.
Note
This FSD-1604 does not need software configura-
tion.
Desktop Installation
To install the FSD-1604 on desktop, simply follow the next
steps:
Step 1: Place the FSD-1604 on desktop near a DC power
source.
Step 2: Keep enough ventilation space between the FSD-1604
and the surrounding objects.
Note
When choosing a location, please keep in mind
the environmental restrictions discussed in Product
Specifications.

7
Step 3: Connect your FSD-1604 to network devices.
A. Connect one end of a standard network cable to the
10/100 RJ-45 ports on the Back of the FSD-1604.
B. Connect the other end of the cable to the network
devices such as printer servers, workstations or
routers…etc.
Step 4: Supply power to the FSD-1604.
A. Connect one end of the power cable to the
FSD-1604.
B. Connect the 5V DC power adapter to a standard
wall outlet.
When the Switch receives power, the Power LED should remain
solid Green.
PC/Laptop
xDSL/Cable Router
Internet Power Adapter
RJ-45
RJ-45
Power
001101010
161412108642
15131197531 Power ON/OFF

8
Wall Mount Installation
Step 1: PleasendthewallthatcanmounttheFSD-1604.
Step 2: Install two screws on the wall.
Step 3: Hang the FSD-1604 on the screws from the wall.
Step 4: Repeat step 4 of Desktop Installation for supply power
to the FSD-1604.
Note
Before wall mount installation, please consider the
material quality of wall, power socket location and
Ethernet cable length.
RJ-45
UTP Cable
Power
Adapter

9
3.Product Specications
Model FSD-1604
HardwareSpecication
Network Connector 16-Port RJ-45 for 10/100Base-TX
LED Display System: Power x1 (Green)
Per Port: LNK/ACT (Green)
Switch Architecture Store and Forward switch architecture
MAC Address Table 8K MAC address table with Auto learning function
Switch Fabric 3.2Gbps
Switch Throughput 2.38Mpps
Maximum Packet Size 1522Bytes
Flow Control Back pressure for Half-Duplex. IEEE 802.3x Pause
Frame for Full-Duplex
Power Requirement DC 5V,1A Power Adapter
Power Consumption 2.7 Watts / 9.2BTU
Dimension (W x D x H) 200x 135 x 35 mm
Weight 369g
Standard Conformance
EMI Safety FCC Class B, CE
Operating environment 0 ~ 50 Degree C
Storage environment -10 ~ 70 Degree C
Operating Humidity 5 ~ 95%, Relative Humidity, non-condensing
Storage Humidity 5 ~ 95%, Relative Humidity, non-condensing
Standard Compliance
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
Ethernet
Fast Ethernet
Flow Control

10
4.Customer Support
Thank you for purchase PLANET products. You can browse our
online FAQ resource at the PLANET web site rst to check if it
could solve you issue. If you need more support information,
please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[email protected]w
Copyright © PLANET Technology Corp. 2012.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong
to their respective owners.

EC Declaration of Conformity
For the following equipment:
*Type of Product: 16-Port 10/100Mbps Fast Ethernet Switch, Plastic
*Model Number: FSD-1604
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.).
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on (2004/108/EC).
For the evaluation regarding the EMC, the following standards were applied:
EN 55022 (CLASS B: 2006 + A1:2007)
EN 61000-3-2 (2006 + A2: 2009)
EN 61000-3-3 (2008)
EN 55024 (1998 + A1: 2001 + A2:2003)
IEC 61000-4-2 (2008)
IEC 61000-4-3 (2006 + A1: 2007 + A2:2010)
IEC 61000-4-4 (2004 + A1: 2010)
IEC 61000-4-5 (2005)
IEC 61000-4-6 (2008)
IEC 61000-4-8 (2009)
IEC 61000-4-11 (2004)
Responsible for marking this declaration if the:
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Product Manager
Taiwan 29, Feb., 2012
Place Date LegalSignature
PLANET TECHNOLOGY CORPORATION
e-mail: [email protected] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:[phone] Fax:[phone]

This page is intentionally left blank