Planet WGSW-28040 Installation instructions

Command Guide of WGSW-28040
1

Command Guide of WGSW-28040
2
Contents
Chapter 1 COMMAND LINE INTERFACE ................................................... 12
1.1 Accessing the CLI ............................................................................................................................. 12
1.2 Command Line Modes ...................................................................................................................... 12
1.3 Cammand Help .................................................................................................................................. 13
1.4 Command Line Editing ..................................................................................................................... 14
1.5 Requirements .................................................................................................................................... 14
Chapter 2 CONSOLE CLI MANAGEMENT ................................................. 16
2.1 Terminal Setup................................................................................................................................... 16
2.2 Logon to the Console ....................................................................................................................... 18
2.3 Configuring IP Address .................................................................................................................... 18
Chapter 3 TELNET CLI MANAGEMENT ..................................................... 21
3.1 Telnet Login ....................................................................................................................................... 21
Chapter 4 Commands for CLI Configuration ............................................ 22
4.1 802.1x ................................................................................................................................................. 22
4.1.1 dot1x..........................................................................................................................................................22
4.1.2 dot1x authentication...................................................................................................................................23
4.1.3 dot1x reauthentication................................................................................................................................24
4.1.4 dot1x timeout reauth-period.......................................................................................................................25
4.1.5 dot1x timeout quiet-period..........................................................................................................................26
4.1.6 dot1x timeout supp-timeout........................................................................................................................26
4.1.7 dot1x max-req............................................................................................................................................27
4.1.8 dot1x guest-vlan.........................................................................................................................................28
4.1.9 dot1x guest-vlan.........................................................................................................................................30
4.1.10 show dot1x...............................................................................................................................................31
4.1.11 show dot1x authenticated-hosts...............................................................................................................32
4.1.12 show dot1x interface................................................................................................................................32
4.1.13 show dot1x guest-vlan .............................................................................................................................33
4.2 AAA ..................................................................................................................................................... 35
4.2.1 aaa authentication......................................................................................................................................35
4.2.2 login authentication....................................................................................................................................36
4.2.3 ip http login authentication .........................................................................................................................38
4.2.4 enable authentication.................................................................................................................................40
4.2.5 show aaa authentication ............................................................................................................................42
4.2.6 show line lists.............................................................................................................................................43

Command Guide of WGSW-28040
3
4.2.7 tacacs default-config..................................................................................................................................44
4.2.8 tacacs host.................................................................................................................................................45
4.2.9 show tacacs default-config.........................................................................................................................46
4.2.10 show tacacs.............................................................................................................................................46
4.2.11 radius default-config.................................................................................................................................47
4.2.12 radius host ...............................................................................................................................................48
4.2.13 show radius default-config .......................................................................................................................49
4.2.14 show radius..............................................................................................................................................50
4.3 ACL ..................................................................................................................................................... 51
4.3.1 mac acl.......................................................................................................................................................51
4.3.2 permit (MAC)..............................................................................................................................................51
4.3.3 deny (MAC)................................................................................................................................................52
4.3.4 ip acl ..........................................................................................................................................................54
4.3.5 permit (IP)..................................................................................................................................................54
4.3.6 deny (IP)....................................................................................................................................................57
4.3.7 ipv6 acl.......................................................................................................................................................59
4.3.8 permit (IPv6) ..............................................................................................................................................59
4.3.9 deny (IPv6).................................................................................................................................................61
4.3.10 bind acl.....................................................................................................................................................63
4.3.11 show acl utilization ...................................................................................................................................64
4.4 Administration ................................................................................................................................... 66
4.4.1 enable........................................................................................................................................................66
4.4.2 exit .............................................................................................................................................................67
4.4.3 configure....................................................................................................................................................67
4.4.4 interface.....................................................................................................................................................68
4.4.5 line.............................................................................................................................................................69
4.4.6 end.............................................................................................................................................................70
4.4.7 reboot.........................................................................................................................................................70
4.4.8 system name..............................................................................................................................................71
4.4.9 system contact...........................................................................................................................................72
4.4.10 system location........................................................................................................................................73
4.4.11 username.................................................................................................................................................74
4.4.12 enable password......................................................................................................................................75
4.4.13 ip address ................................................................................................................................................76
4.4.14 ip default-gateway....................................................................................................................................76
4.4.15 ip dns.......................................................................................................................................................77
4.4.16 ip dhcp .....................................................................................................................................................78
4.4.17 ipv6 autoconfig.........................................................................................................................................79
4.4.18 ipv6 address.............................................................................................................................................80

Command Guide of WGSW-28040
4
4.4.19 ipv6 default-gateway................................................................................................................................80
4.4.20 ipv6 dhcp..................................................................................................................................................81
4.4.21 ip service..................................................................................................................................................82
4.4.22 ip session-timeout....................................................................................................................................83
4.4.23 exec-timeout ............................................................................................................................................84
4.4.24 password-thresh ......................................................................................................................................85
4.4.25 silent-time.................................................................................................................................................87
4.4.26 history......................................................................................................................................................88
4.4.27 clear service.............................................................................................................................................90
4.4.28 ssl ............................................................................................................................................................91
4.4.29 ping..........................................................................................................................................................92
4.4.30 traceroute.................................................................................................................................................92
4.4.31 clear arp...................................................................................................................................................93
4.4.32 show version............................................................................................................................................94
4.4.33 show info..................................................................................................................................................94
4.4.34 show history.............................................................................................................................................95
4.4.35 show username........................................................................................................................................96
4.4.36 show ip.....................................................................................................................................................97
4.4.37 show ip dhcp............................................................................................................................................97
4.4.38 show ipv6.................................................................................................................................................98
4.4.39 show ipv6 dhcp........................................................................................................................................99
4.4.40 show line..................................................................................................................................................99
4.5 Cable Diagnostics ........................................................................................................................... 101
4.5.1 show cable-diag interface ........................................................................................................................101
4.6 DHCP Snooping............................................................................................................................... 102
4.6.1 Ip dhcp snooping......................................................................................................................................102
4.6.2 ip dhcp snooping vlan..............................................................................................................................102
4.6.3 ip dhcp snooping trust..............................................................................................................................103
4.6.4 ip dhcp snooping verify............................................................................................................................104
4.6.5 ip dhcp snooping limit rate .......................................................................................................................105
4.6.6 clear ip dhcp snooping statistics ..............................................................................................................106
4.6.7 show ip dhcp snooping ............................................................................................................................106
4.6.8 show ip dhcp snooping interface..............................................................................................................107
4.6.9 show ip dhcp snooping binding................................................................................................................108
4.6.10 ip dhcp snooping option.........................................................................................................................108
4.6.11 ip dhcp snooping option action...............................................................................................................109
4.6.12 ip dhcp snooping option circuit-id........................................................................................................... 110
4.6.13 ip dhcp snooping option remote-id......................................................................................................... 110
4.6.14 show ip dhcp snooping option.................................................................................................................111

Command Guide of WGSW-28040
5
4.6.15 ip dhcp snooping database.................................................................................................................... 112
4.6.16 ip dhcp snooping database write-deley.................................................................................................. 113
4.6.17 ip dhcp snooping database timeout ....................................................................................................... 114
4.6.18 clear ip dhcp snooping database statistics............................................................................................. 115
4.6.19 renew ip dhcp snooping database ......................................................................................................... 116
4.6.20 show ip dhcp snooping database........................................................................................................... 117
4.7 DoS .................................................................................................................................................... 119
4.7.1 dos........................................................................................................................................................... 119
4.7.2 port dos....................................................................................................................................................122
4.7.3 ip gratuitous-arps .....................................................................................................................................122
4.7.4 show dos..................................................................................................................................................123
4.8 Dynamic ARP Inspection ................................................................................................................ 124
4.8.1 ip arp inspection.......................................................................................................................................124
4.8.2 ip arp inspection vlan...............................................................................................................................124
4.8.3 ip arp inspection trust...............................................................................................................................125
4.8.4 ip arp inspection validate..........................................................................................................................126
4.8.5 ip arp inspection rate-limit........................................................................................................................127
4.8.6 clear ip arp inspection statistics ...............................................................................................................128
4.8.7 show ip arp inspection .............................................................................................................................129
4.8.8 show ip arp inspection interface...............................................................................................................129
4.9 GVRP ................................................................................................................................................ 131
4.9.1 gvrp..........................................................................................................................................................131
4.9.2 gvrp (port)................................................................................................................................................131
4.9.3 gvrp port registration mode......................................................................................................................132
4.9.4 gvrp port creation vlan forbidden..............................................................................................................133
4.9.5 clear gvrp statistics...................................................................................................................................134
4.9.6 show gvrp statistics..................................................................................................................................134
4.9.7 show gvrp.................................................................................................................................................135
4.9.8 show gvrp port configuration....................................................................................................................136
4.10 IGMP Snooping.............................................................................................................................. 138
4.10.1 Ip igmp snooping....................................................................................................................................138
4.10.2 ip igmp snooping report-suppression.....................................................................................................138
4.10.3 ip igmp snooping version.......................................................................................................................139
4.10.4 ip igmp snooping unknown-multicast action...........................................................................................140
4.10.5 ip igmp snooping forward-method..........................................................................................................141
4.10.6 ip igmp snooping querier........................................................................................................................142
4.10.7 ip igmp snooping vlan............................................................................................................................143
4.10.8 ip igmp snooping vlan parameters .........................................................................................................145
4.10.9 ip igmp snooping static port ...................................................................................................................147

Command Guide of WGSW-28040
6
4.10.10 ip igmp snooping vlan static router port................................................................................................147
4.10.11 ip igmp snooping static group...............................................................................................................149
4.10.12 ip igmp profile.......................................................................................................................................150
4.10.13 ip igmp filter..........................................................................................................................................151
4.10.14 ip igmp max-group...............................................................................................................................152
4.10.15 clear ip igmp snooping groups.............................................................................................................154
4.10.16 clear ip igmp snooping statistics ..........................................................................................................154
4.10.17 show ip igmp snooping counters..........................................................................................................155
4.10.18 show ip igmp snooping groups.............................................................................................................155
4.10.19 show ip igmp snooping router..............................................................................................................156
4.10.20 show ip igmp snooping querier ............................................................................................................157
4.10.21 show ip igmp snooping.........................................................................................................................157
4.10.22 show ip igmp snooping vlan.................................................................................................................158
4.10.23 show ip igmp snooping forward-all.......................................................................................................159
4.10.24 show ip igmp profile.............................................................................................................................160
4.10.25 show ip igmp port filter.........................................................................................................................160
4.10.26 show ip igmp port max-group...............................................................................................................161
4.10.27 show ip igmp port max-group action....................................................................................................162
4.11 IP Source Guard ............................................................................................................................ 164
4.11.1 ip source verify.......................................................................................................................................164
4.11.2 ip source binding....................................................................................................................................165
4.11.3 show ip source interface.........................................................................................................................165
4.11.4 show ip source binding...........................................................................................................................166
4.12 Link Aggregation ........................................................................................................................... 168
4.12.1 lag load-balance.....................................................................................................................................168
4.12.2 lacp system-priority................................................................................................................................169
4.12.3 lacp port-priority.....................................................................................................................................169
4.12.4 lacp timeout............................................................................................................................................170
4.12.5 lag..........................................................................................................................................................171
4.12.6 show lag.................................................................................................................................................172
4.13 LLDP ............................................................................................................................................... 174
4.13.1 lldp .........................................................................................................................................................174
4.13.2 lldp tx-interval.........................................................................................................................................175
4.13.3 lldp reinit-delay.......................................................................................................................................175
4.13.4 lldp holdtime-multiplier ...........................................................................................................................176
4.13.5 lldp tx-delay............................................................................................................................................177
4.13.6 lldp tlv-select..........................................................................................................................................178
4.13.7 lldp tlv-select pvid...................................................................................................................................179
4.13.8 lldp tlv-select vlan-name.........................................................................................................................180

Command Guide of WGSW-28040
7
4.13.9 lldp lldpdu...............................................................................................................................................182
4.13.10 lldp tx/rx................................................................................................................................................182
4.13.11 lldp med................................................................................................................................................184
4.13.12 lldp med tlv-select ................................................................................................................................185
4.13.13 lldp med fast-start-report-count............................................................................................................186
4.13.14 lldp med network-policy........................................................................................................................187
4.13.15 lldp med network-policy add | remove..................................................................................................188
4.13.16 lldp med network-policy auto................................................................................................................189
4.13.17 lldp med location..................................................................................................................................190
4.13.18 show lldp..............................................................................................................................................191
4.13.19 show lldp local-device..........................................................................................................................192
4.13.20 show lldp neighbor...............................................................................................................................195
4.13.21 show lldp med......................................................................................................................................197
4.13.22 show lldp statistics ...............................................................................................................................199
4.13.23 show lldp tlv-overloading......................................................................................................................200
4.14 Logging .......................................................................................................................................... 202
4.14.1 logging ...................................................................................................................................................202
4.14.2 logging flash | buffered...........................................................................................................................203
4.14.3 logging host............................................................................................................................................204
4.14.4 show logging..........................................................................................................................................206
4.14.5 show logging flash | buffered .................................................................................................................207
4.14.6 clear logging flash | buffered..................................................................................................................208
4.15 MAC Address Table ....................................................................................................................... 210
4.15.1 clear mac address-table.........................................................................................................................210
4.15.2 mac address-table aging-time................................................................................................................ 211
4.15.3 mac address-table static........................................................................................................................ 211
4.15.4 mac address-table static drop................................................................................................................212
4.15.5 show mac address-table........................................................................................................................213
4.15.6 show mac address-table counters .........................................................................................................214
4.15.7 show mac address-table aging-time ......................................................................................................214
4.16 Mirror .............................................................................................................................................. 215
4.16.1 mirror session ........................................................................................................................................215
4.16.2 show mirror............................................................................................................................................216
4.17 MLD Snooping ............................................................................................................................... 218
4.17.1 ipv6 mld snooping..................................................................................................................................218
4.17.2 ipv6 mld snooping report-suppression...................................................................................................219
4.17.3 ipv6 mld snooping version......................................................................................................................220
4.17.4 ipv6 mld snooping vlan...........................................................................................................................220
4.17.5 ipv6 mld snooping vlan parameters........................................................................................................222

Command Guide of WGSW-28040
8
4.17.6 ipv6 mld snooping vlan static-port..........................................................................................................224
4.17.7 ipv6 mld snooping vlan static-router-port ...............................................................................................224
4.17.8 ipv6 mld snooping vlan static-group.......................................................................................................226
4.17.9 ipv6 mld profile.......................................................................................................................................227
4.17.10 ipv6 mld filter........................................................................................................................................228
4.17.11 ipv6 mld max-groups............................................................................................................................229
4.17.12 clear ipv6 mld snooping groups ...........................................................................................................231
4.17.13 clear ipv6 mld snooping statistics.........................................................................................................231
4.17.14 show ipv6 mld snooping groups counters............................................................................................232
4.17.15 show ipv6 mld snooping groups...........................................................................................................232
4.17.16 show ipv6 mld snooping router ............................................................................................................233
4.17.17 show ipv6 mld snooping.......................................................................................................................234
4.17.18 show ipv6 mld snooping vlan...............................................................................................................235
4.17.19 show ipv6 mld snooping forward-all.....................................................................................................235
4.17.20 show ipv6 mld profile............................................................................................................................236
4.17.21 show ipv6 mld filter ..............................................................................................................................237
4.17.22 show ipv6 mld max-group....................................................................................................................237
4.17.23 show ipv6 mld max-group action..........................................................................................................238
4.18 Port Security .................................................................................................................................. 240
4.18.1 port-security...........................................................................................................................................240
4.18.2 port-security address-limit......................................................................................................................240
4.18.3 show port-security..................................................................................................................................241
4.19 Port Error Disable ......................................................................................................................... 243
4.19.1 errdisable recovery cause......................................................................................................................243
4.19.2 errdisable recovery interval....................................................................................................................244
4.19.3 show errdisable recovery.......................................................................................................................246
4.20 Port ................................................................................................................................................. 247
4.20.1 description..............................................................................................................................................247
4.20.2 speed.....................................................................................................................................................248
4.20.3 duplex....................................................................................................................................................249
4.20.4 flow-control.............................................................................................................................................249
4.20.5 shutdown................................................................................................................................................251
4.20.6 jumbo-frame...........................................................................................................................................251
4.20.7 protected................................................................................................................................................252
4.20.8 eee.........................................................................................................................................................253
4.20.9 clear interface ........................................................................................................................................254
4.20.10 show interface......................................................................................................................................255
4.21 QoS ................................................................................................................................................. 257
4.21.1 qos.........................................................................................................................................................257

Command Guide of WGSW-28040
9
4.21.2 qos trust.................................................................................................................................................258
4.21.3 qos map.................................................................................................................................................259
4.21.4 qos queue..............................................................................................................................................262
4.21.5 qos cos...................................................................................................................................................264
4.21.6 qos trust.................................................................................................................................................265
4.21.7 qos remark.............................................................................................................................................265
4.21.8 show qos................................................................................................................................................266
4.21.9 show qos map........................................................................................................................................267
4.21.10 show qos interface...............................................................................................................................268
4.22 Rate Limit ....................................................................................................................................... 270
4.22.1 rate limit.................................................................................................................................................270
4.22.2 rate limit (interface)................................................................................................................................271
4.23 RMON ............................................................................................................................................. 273
4.23.1 Rmon event............................................................................................................................................273
4.23.2 Rmon alarm ...........................................................................................................................................274
4.23.3 rmon history...........................................................................................................................................276
4.23.4 clear rmon interfaces statistics...............................................................................................................277
4.23.5 show rmon event....................................................................................................................................278
4.23.6 show rmon event log..............................................................................................................................279
4.23.7 show rmon alarm ...................................................................................................................................280
4.23.8 show rmon history..................................................................................................................................280
4.23.9 show rmon history statistics...................................................................................................................281
4.24 SNMP .............................................................................................................................................. 283
4.24.1 snmp......................................................................................................................................................283
4.24.2 snmp trap...............................................................................................................................................283
4.24.3 snmp view..............................................................................................................................................284
4.24.4 snmp access group................................................................................................................................285
4.24.5 snmp community....................................................................................................................................286
4.24.6 snmp user..............................................................................................................................................287
4.24.7 snmp engineID.......................................................................................................................................288
4.24.8 snmp host ..............................................................................................................................................289
4.24.9 show snmp.............................................................................................................................................290
4.24.10 show snmp trap....................................................................................................................................291
4.24.11 show snmp view...................................................................................................................................291
4.24.12 show snmp group.................................................................................................................................292
4.24.13 show snmp community.........................................................................................................................292
4.24.14 show snmp host...................................................................................................................................293
4.24.15 show snmp user...................................................................................................................................293
4.24.16 show snmp engineid............................................................................................................................294

Command Guide of WGSW-28040
10
4.25 Storm Control ................................................................................................................................ 295
4.25.1 Storm-control unit...................................................................................................................................295
4.25.2 storm-control ifg.....................................................................................................................................295
4.25.3 storm-control..........................................................................................................................................296
4.25.4 storm-control action ...............................................................................................................................298
4.25.5 show storm-control.................................................................................................................................299
4.26 Spanning Tree ................................................................................................................................ 301
4.26.1 spanning-tree.........................................................................................................................................301
4.26.2 spanning-tree bpdu................................................................................................................................302
4.26.3 spanning-tree mode...............................................................................................................................302
4.26.4 spanning-tree priority .............................................................................................................................304
4.26.5 spanning-tree hello-time.........................................................................................................................305
4.26.6 spanning-tree max-hops ........................................................................................................................306
4.26.7 spanning-tree forward-delay ..................................................................................................................306
4.26.8 spanning-tree maximum-age .................................................................................................................307
4.26.9 spanning-tree tx-hold-count ...................................................................................................................307
4.26.10 spanning-tree pathcost method............................................................................................................308
4.26.11 spanning-tree port-priority ....................................................................................................................309
4.26.12 spanning-tree cost................................................................................................................................309
4.26.13 spanning-tree edge..............................................................................................................................310
4.26.14 spanning-tree bpdu-filter...................................................................................................................... 311
4.26.15 spanning-tree bpdu-guard.................................................................................................................... 311
4.26.16 spanning-tree link-type.........................................................................................................................312
4.26.17 spanning-tree mst configuration...........................................................................................................312
4.26.18 spanning-tree mst priority.....................................................................................................................314
4.26.19 spanning-tree mst cost.........................................................................................................................314
4.26.20 spanning-tree mst port-priority.............................................................................................................315
4.27 System File .................................................................................................................................... 317
4.27.1 boot system............................................................................................................................................317
4.27.2 save .......................................................................................................................................................318
4.27.3 copy .......................................................................................................................................................318
4.27.4 delete.....................................................................................................................................................320
4.27.5 restore-default........................................................................................................................................321
4.27.6 show config............................................................................................................................................321
4.27.7 show flash..............................................................................................................................................322
4.28 Time ................................................................................................................................................ 324
4.28.1 clock set.................................................................................................................................................324
4.28.2 clock timezone .......................................................................................................................................324
4.28.3 clock source...........................................................................................................................................326

Command Guide of WGSW-28040
11
4.28.4 clock summer-time.................................................................................................................................326
4.28.5 show clock .............................................................................................................................................328
4.28.6 sntp........................................................................................................................................................329
4.28.7 show sntp...............................................................................................................................................330
4.29 VLAN ............................................................................................................................................... 331
4.29.1 vlan ........................................................................................................................................................331
4.29.2 vlan name ..............................................................................................................................................331
4.29.3 switchport mode.....................................................................................................................................332
4.29.4 switchport hybrid pvid ............................................................................................................................333
4.29.5 switchport hybrid ingress-filtering...........................................................................................................333
4.29.6 switchport hybrid acceptable-frame-type................................................................................................334
4.29.7 switchport hybrid allowed vlan add ........................................................................................................335
4.29.8 switchport hybrid allowed vlan remove ..................................................................................................335
4.29.9 switchport access vlan...........................................................................................................................336
4.29.10 switchport tunnel vlan...........................................................................................................................337
4.29.11 switchport trunk native vlan..................................................................................................................337
4.29.12 switchport trunk allowed vlan...............................................................................................................338
4.29.13 switchport default-vlan tagged .............................................................................................................338
4.29.14 switchport forbidden default-vlan .........................................................................................................339
4.29.15 switchport forbidden vlan .....................................................................................................................340
4.29.16 management-vlan ................................................................................................................................340
4.29.17 show management-vlan.......................................................................................................................341
4.29.18 protocol-vlan group..............................................................................................................................341
4.29.19 protocol vlan binding............................................................................................................................343
4.29.20 show protocol vlan group.....................................................................................................................343
4.29.21 show protocol vlan interfaces...............................................................................................................344
4.30 Voice VL AN .................................................................................................................................... 346
4.30.1 voice vlan...............................................................................................................................................346
4.30.2 voice vlan id...........................................................................................................................................346
4.30.3 voice vlan oui-table ................................................................................................................................347
4.30.4 voice vlan cos ........................................................................................................................................347
4.30.5 voice vlan aging-time .............................................................................................................................348
4.30.6 voice vlan cos mode ..............................................................................................................................349
4.30.7 voice vlan enable...................................................................................................................................349
4.30.8 show voice vlan......................................................................................................................................350

Command Guide of WGSW-28040
12
Chapter 1 COMMAND LINE INTERFACE
1.1 Accessing the CLI
When accessing the management interface for the switch over a direct connection to the server’s console port, or via a
Telnet connection, the switch can be managed by entering command keywords and parameters at the prompt. Using the
switch's command-line interface (CLI) is very similar to entering commands on a UNIX system.
This chapter describes how to use the Command Line Interface (CLI).
1.2 Command Line Modes
The CLI groups all the commands in appropriate modes according to the nature of the command. A sample of the CLI
command modes are described below. Each of the command modes supports specific software commands.
Mode-based Command Hierarchy
The Command Line Interface (CLI) groups all the commands in appropriate modes by the nature of the commands.
Examples of the CLI command modes are described below. Each of the command modes supports specific switch’s
commands.
The CLI Command Modes table captures the command modes, the prompts visible in that mode and the exit method from
that mode.
Command Mode Access Method Prompt Exit or Access Previous Mode
User Mode
This is the first level of
access. Perform basic tasks
and list system information.
COMMAND> Enter Logout command
Privileged Mode From the User Mode, enter
the enable command. Switch# To exit to the User Mode, enter exit or Logout.
Global Config
Mode
From the Privileged Mode,
enter the configuration
command.
Switch (Config)# To exit to the Privileged Mode,enter
the exit command.
Interface Config
Mode
From the Global Config
mode, enter the interface
<port#> command.
Switch (config-if)# To exit to the Global Config mode,
enter exit.
Table 4-1 CLI Command Modes

Command Guide of WGSW-28040
13
The CLI is divided into various modes. The commands in one mode are not available until the operator switches to that
particular mode. The commands available to the operator at any point in time depend upon the mode. Entering a question
mark (?) at the CLI prompt, and displays a list of the available commands and descriptions of the commands.
The CLI provides the following modes:
User Mode
When the operator logs into the CLI, the User Mode is the initial mode. The User Mode contains a limited set of
commands. The command prompt shown at this level is:
Command Prompt: switch>
Privileged Mode
To have access to the full suite of commands, the operator must enter the Privileged Mode. The Privileged Mode requires
password authentication. From Privileged Mode, the operator can issue any Exec command to enter the Global
Configuration mode. The command prompt shown at this level is:
Command Prompt: switch#
Global Config Mode
This mode permits the operator to make modifications to the running configuration. General setup commands are grouped
in this mode. From the Global Configuration mode, the operator can enter the Interface Configuration mode. The
command prompt at this level is:
Command Prompt: switch(Config)#
From the Global Config mode, the operator may enter the following configuration modes:
Interface Config Mode
Many features are enabled for a particular interface. The Interface commands enable or modify the operation of an
interface. In this mode, a physical port is set up for a specific logical connection operation. The command prompt at this
level is:
Command Prompt: Switch(config-if)#
1.3 Cammand Help
To enter ? at any command mode, and the CLI will return possible commands at that point, along with some description of
the keywords:
Switch(config)# copy tftp ?
running-config Running configurations
startup-config Startup configurations
firmware Runtime firmware image

Command Guide of WGSW-28040
14
To use the <Tab> key to do keyword auto completion:
Switch(config)# copy tftp r<Tab>
Switch(config)# copy tftp running-config
You do not need to type in the entire commands; you only need to type in enough characters for the CLI to recognize the
command as unique. The following example shows you how to enter the show running-config command:
Switch(config)# sh ru
Note: If you want to stop displaying the information, press key “q” to escape.
1.4 Command Line Editing
Before you press <Enter>, the current command line can be edited using special keys including
arrows and <Ctrl> keys. The following table describes the special keys and their function
supported by the CLI:
Keys Function
<Ctrl>-B;
←
Moves the cursor back one character
<Ctrl>-D Deletes the character at the cursor
<Ctrl>-E Jumps to the end of the current command line
<Ctrl>-F;
→
Moves the cursor forward one character
<Ctrl>-K Deletes from the cursor to the end of the command line
<Ctrl>-N;
↓
Enters the next command line in the command history
<Ctrl>-P;
↑
Enters the previous command line in the command history
<Ctrl>-U Deletes from the cursor to the beginning of the command line
<Ctrl>-W Deletes the last word typed
<Esc> B Moves the cursor backward one word
<Esc> D Deletes from the cursor to the end of the word
<Esc> F Moves the cursor forward one word
<Backspace> Delete the character before the cursor
<Del> Delete the character at the cursor
1.5 Requirements
Workstations running Windows XP/Vista/7/8/, Windows 2003/2008, MAC OS X or later, Linux, UNIX, or other
platforms are compatible with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Interface Card)

Command Guide of WGSW-28040
15
Serial Port Connection (Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS-232 converter.
The above Workstations have been installed with terminal emulator, such as Hyper Terminal included in
Windows XP/2003.
Serial cable -- one end is attached to the RS-232 serial port, while the other end to the console port of the
Managed Switch.
Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ-45 connectors.
The above PC is installed with Web Browser and JAVA runtime environment plug-in.

Command Guide of WGSW-28040
16
Chapter 2 CONSOLE CLI MANAGEMENT
2.1 Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to RJ-45 type of serial
(console) port of the Managed Switch.
Figure 2-1 Managed Switch Console Connectivity
The console port of the Managed Switch is a RJ-45 type, RS-232 serial port connector. It is an interface for connecting a
terminal directly. Through the console port, it provides rich diagnostic information including IP Address setting, factory
reset, port management, link status and system setting. Users can use the attached RS-232 cable in the package and
connect to the console port on the device. After the connection, users can run any terminal emulation program (Hyper
Terminal, ProComm Plus, Telix, Winterm and so on) to enter the startup screen of the device.
WGSW-28040 Rear Panel
Figure 2-2: Rear Panel of WGSW-28040
A terminal program is required to make the software connection to the Managed Switch. Windows' Hyper Terminal
program may be a good choice. The Hyper Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be configured as:
♦ Baud
: 115200
♦ Data bits
: 8
♦ Parity
: None
♦ Stop bits
: 1
♦ Flow control
: None
Console port

Command Guide of WGSW-28040
17
Figure 2-3 Hyper Terminal COM Port Configuration
You can change these settings, if desired, after you log on. This management method is often preferred because you can
remain connected and monitor the system during system reboots. Also, certain error messages are sent to the serial port,
regardless of the interface through which the associated action was initiated. AMacintosh or PC attachment can use any
terminal-emulation program for connecting to the terminal serial port. A workstation attachment under UNIX can use an
emulator such as TIP.

Command Guide of WGSW-28040
18
2.2 Logon to the Console
Once the terminal is connected to the device, power on the Managed Switch, and the terminal will display “running testing
procedures”. Then, the following message asks to log-in user name and password. The factory default user name and
password are shown as follows and the login screen in Figure 3-1 appears.
Username: admin
Password: admin
Figure 3-1: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed description of the commands, please
refer to the following chapters.
1. For security reason, please change and memorize the new password after this first setup.
2. Only accept command in lowercase letter under console interface.
2.3 Configuring IP Address
The Managed Switch is shipped with default IP address shown below.
IPAddress: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the procedures as follows:
Show the current IP Address
1. At the “#” prompt, enter “show ip”.
2. The screen displays the current IP address and Subnet Mask as shown in Figure 3-2.

Command Guide of WGSW-28040
19
Figure 3-2: IP Information Screen
Configuring IP Address
3. On ”WGSW-28040#” prompt, enter “configure”.
4. On “WGSW-28040(config)#” prompt, enter the following command and press <Enter> as shown in Figure
3-3.
WGSW-28040(config)# ip address 192.168.1.100 mask 255.255.255.0
WGSW-28040(config)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 3-3: Configuring IP Address Screen
5. Repeat step 1 to check if the IP address is changed.

Command Guide of WGSW-28040
20
Store current switch configuration
6. At the “#” prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 3-4: Saving Current Configuration Command Screen
If the IP is successfully configured, the Managed Switch will apply the new IP address setting immediately. You can
access the Web interface of the Managed Switch through the new IP address.
If you are not familiar with the console command or the related parameter, enter “ ?”
anytime
in console to get the help description.