Planet XGS-6320-8UP4X User manual

L3 Multi-port 10Gigabit Managed Ethernet Switch
XGS-6320-8X8TR
XGS-6320-12X4TR
XGS-6320-8UP4X
Quick Installation Guide

Table of Contents
1. Package Contents................................................................................. 3
2. Requirements....................................................................................... 4
3. Terminal Setup..................................................................................... 5
3.1 Logging on to the Console.............................................................. 6
 3.2 ConguringIPAddress ................................................................... 7
 3.3 StoringCurrentSwitchConguration ............................................... 9
4. Starting Web Management .................................................................. 10
 4.1 LoggingintotheManagedSwitch................................................. 11
 4.2 SavingConguration .................................................................... 14
5. RecoveringtoDefaultConguration ..................................................... 15
6. Customer Support .............................................................................. 16

3
1. Package Contents
Thank you for purchasing PLANET Multi-port 10Gigabit Managed Ethernet
Switch, XGS-6320-8X8TR/XGS-6320-12X4TR/XGS-6320-8UP4X. Thedescriptions
ofthesemodelsareshownbelow:
XGS-6320-8X8TR Layer38-Port10GBASE-XSFP++8-Port10GBASE-T
ManagedEthernetSwitch
XGS-6320-12X4TR Layer312-Port10GBASE-XSFP++4-Port10GBASE-T
ManagedEthernetSwitch
XGS-6320-8UP4X Layer38-Port10GBASE-T802.3btPoE+4-Port
10GBASE-XSFP+ManagedEthernetSwitch
“Managed Switch” is used as an alternative name in this Quick Installation
Guide.
Open the box of the Managed Switch and carefully unpack it. The box should
containthefollowingitems:
L3ManagedSwitchx1 QuickInstallation
Guidex1 DB9toRS232Cablex1
Let’s get started with your PLANET product
XGS-6320-8X8TR
EN Please scan the QR code to browse our online User’s Manual or Quick
Installation Guide and follow the instructions to complete the setup.
Quick
Installation
DE
Bitte scannen Sie den QR Code sie werden per Browser zur
Bedienungsanleitung oder Schnellanleitung weiter geleitet. Folgen Sie den
Anweisungen um die Installation abzuschließen.
FR
Veuillez scanner le code QR pour obtenir notre Notice d’Utilisation en
ligne ou notre Guide d’Installation Rapide et suivez les instructions pour
compléter la conguration
ES
Escanee el código QR para encontrar el Manual del Usuario en línea o
la Guía de Instalación Rápida y siga las instrucciones para completar la
conguración.
IT Scansiona il codice QR per consultare online il Manuale utente o la Guida di
installazione rapida e segui le istruzioni per completare la congurazione.
PT Por favor, escaneie o QR code para navegar no Manual do Usuário ou Guia
de Instalação Rápida. Siga as instruções para completar a conguração.
PL
Zeskanuj kod QR, aby otworzyć naszą internetową instrukcję obsługi
lub instrukcję szybkiej instalacji. Postępuj zgodnie z instrukcjami, aby
zakończyć poprawną kongurację.
RU
One word modify: Отсканируйте QR-код, чтобы просмотреть наше
онлайн-руководство пользователя или руководство по быстрой
настройке, и следуйте инструкциям для завершения настройки
RO Te rugam sa scanezi codul QR, pentru a descarca User’s Manual sau Quick
Installation Guide si a urmari instructiunile necesare in nalizarea instalarii
AR
Need more help?
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Technical Support: [email protected]
Copyright © PLANET Technology Corp. 2023.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Part No. 2340-A98260-000
ACPowerCordx1
Rack-mountingKits SFPDustCapsx12,8or4
(dependingonmodels)
If any item is found missing or damaged, please contact your local reseller for
replacement.

4
2. Requirements
zWorkstations running Windows 7/8/10/11, MAC OS 11 or later, Linux,
UNIX,orotherplatformsthatarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernet NIC(NetworkInterfaceCard)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
 The above Workstations have been installed with terminal emulator,
such as Tera Term or PuTTY.
Serial cable -- one end is attached to the RS232 serial port, while the
otherendtotheconsoleportoftheManagedSwitch.
zEthernet Port Connection
 Network cables -- Use standard network (UTP) cables with RJ45 connec-
tors.
 TheabovePCisinstalledwithWebbrowser.
It is recommended to use the latest Chrome version that works
withyourworkstationtoaccessthe Managed Switch.Ifthe Web
interface of the Managed Switch is not accessible, please turn
offtheanti-virussoftwareorfirewallandthentryitagain.

5
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebookcomputerandtoRJ45typeofserialportoftheManagedSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the
ManagedSwitch.
1. Run terminal program on the OS.
2.When the following screenappears,makesure that theCOMportshouldbe
conguredas:
zSpeed:115200
zData:8bit
zParity:None
zStopbits:1bit
zFlowcontrol:None
Figure 3-2: COM Port Conguration

6
3.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed Switch,
and the terminal will display “running testing procedures”. Subsequently, a
prompt will request the entry of your username and password. The factory
default user name and password are shown as follows and you can refer to
Figure3-3fortheloginscreen.
Username:admin
Password:admin
The following console screen based on the XGS-6320-8X8TR
will be the same as that of the XGS-6320-12X4TR and XGS-
6320-8UP4X.
Figure 3-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a
detaileddescriptionofthecommands,pleaserefertothefollowingchapters.
1.For security reason, please change and memorize the new
passwordafterthisfirstsetup.
2.Onlyaccept command in lowercase letter under console inter-
face.

7
3.2 ConguringIPAddress
TheManagedSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch,
pleaseusetheproceduresasfollows:
 Show the current IP Address
1.Atthe“#” prompt, enter “show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure3-4.
Figure 3-4: IP Information Screen

8
 Conguring IP Address
3.At the “#” prompt, enter the following command and press <Enter> as
showninFigure3-5.
XGS-6320-8X8TR#congure terminal
XGS-6320-8X8TR(cong)#interface vlan 1
XGS-6320-8X8TR(cong-if-vlan)#ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Managed
Switch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Figure 3-5: Conguring IP Address Screen
4.Repeatstep1tocheckiftheIPaddresshaschanged.
If the IP is successfully congured, the Managed Switch will apply the new IP
addresssettingimmediately.Youcan accesstheWebinterfaceofthe Managed
SwitchthroughthenewIPaddress.

9
3.3 StoringCurrentSwitchConguration
Inthe Managed Switch,therunning conguration sequence running-cong can
be saved from the RAM to FLASH by “copy” command, so that the running
conguration sequence becomes the start-up conguration le, which is called
congurationsave.
Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 3-6: Saving Current Conguration Command Screen
Ifyou are not familiar with the console commandor the related
parameter, enter “help” anytime in console to get the help
description.

10
4. Starting Web Management
The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is congured through an Ethernet
connection. Please make sure the manager PC must be set to the same IP
subnet address.
Forexample,the defaultIPaddressoftheManagedSwitchis192.168.0.100,
then the manager PC should be set to 192.168.0.x (where x is a
number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address: 192.168.0.100
Figure 4-1: IP Management Diagram

11
4.1 Logging in to the Managed Switch
1.Use Chrome, Edge or Firefox Web browser and enter IP address
https://192.168.0.100(thefactorydefaultIPaddressortheonethatyou
havejustchangedinconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name
and password “admin” (or the password you have changed via console).
TheloginscreeninFigure4-2appears.
DefaultIPAddress:192.168.0.100
DefaultUsername: admin
DefaultPassword:admin
Figure 4-2: Login Screen
The following web screen based on the XGS-6320-8X8TR will
be the same as that of the XGS-6320-12X4TR and the XGS-
6320-8UP4X.

12
3.Afterenteringthepassword,themainscreenappearsasFigure4-3shows.
Figure 4-3: Web Main Screen of Managed Switch
The Switch Menu on the top of the Web page lets you access all the
commands and statistics the Managed Switch provides. The Switch Menu
always contains one or more buttons, such as “System”, “Switching”,
“Routing” “QoS”, “Security”, “Ring”and“Maintenance”.
Figure 4-4: Switch Menu
Figure 4-5: Switch Menu – System, Switching, Routing and QoS

13
Figure 4-6: Switch Menu – Security, Ring and Maintenance
Figure 4-7: Switch Menu – PoE (only applies to XGS-6320-8UP4X)
If you are not familiar with Switch functions or the related
parameter, press “Help icon” anytime on the Web page to get
thehelpdescription.
Now, you can use the Web management interface to continue the Switch
management or manage the Switch by console interface.
Please refer to the user’s manual for more.

14
4.2.SavingConguration
To save all applied changes and set the current conguration as a startup
conguration on the Web user interface, the startup-conguration le will be
loadedautomaticallyacrossasystemreboot.
1. Click the Save icon on the top Switch Menu bar.
Figure 4-8: Save Cong -- Hot key
2. Press the “Save Conguration” button.
3. Or the other way to save the setting is to Click Maintenance, Save
Startup Cong.
Figure 4-9: Save Cong – Maintenance

15
5.RecoveringtoDefaultConguration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address “192.168.0.100” or reset
the login password to default value, press the hardware-based reset button
on the front panel for about 10 seconds. After the device is rebooted,
you can log in the management Web interface within the same subnet of
192.168.0.xx.
Reset
Console
115200, N, 8, 1
10
9
12
11
14
13
16
15
Reset Button
Figure 5-1: Reset Button

16
6. Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQs
resource and User’s Manual on PLANET Web site rst to check if it could solve
your issue. If you need more support information, please contact PLANET
switch support team.
PLANETonlineFAQs:
https://www.planet.com.tw/en/support/faq
Switchsupportteammailaddress:
[email protected]
XGS-6320-8X8TR/XGS-12X4TR/XGS-6320-8UP4XUser’sManual:
https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword
=xgs-6320&view=3#list
(Please select your switch model name from the drop-down menu of Product
Model.)
Copyright©PLANETTechnologyCorp.2023.
Contents are subject to revision without prior notice.
PLANETisaregisteredtrademarkofPLANETTechnologyCorp.
Allothertrademarksbelongtotheirrespectiveowners.