Planet WNAP-6305 User manual

802.11b/g/n Outdoor
Wireless Access Point
WNAP-6308

2 / 36
Product Position
Product Glance
Product Overview
Product Installation
Product Benefits
Product Features
Management –Web UI & Utility
Applications
Product Comparison
Appendix
Related Products
Outdoor Antennas
Accessories
Presentation Outlines

3 / 36
Product Position –Outdoor Wireless
WNAP-7300
WNAP-6306 WNAP-6308 WNAP-7206
WNAP-7350
WNAP-6350
150Mbps 300Mbps
5GHz 2.4GHz
WNAP-7320
WNAP-6305

4 / 36
Product Glance –2.4GHz 11n Outdoor AP
WNAP-6305 WNAP-6306 WNAP-6308 WNAP-6350
MIMO System 1T1R 2T2R
Max. TX Speed 150Mbps 300Mbps
Max. TX Power 27dBm(500mW) 20dBm(100mW) 23dBm(200mW) 27dBm(500mW)
Antenna 12dBi None
Antenna
Connector
RP-SMA
(Female) x 1
N-Type
(Male) x 1
N-Type
(Male) x 1
N-Type
(Female) x 2
PoE 12V DC/
Passive PoE(40m)
18V DC/
Passive PoE (30m)
24V DC/
Passive PoE
(100m)
802.3af PoE
(100m)
LAN 10/100Mbps x 1 10/100Mbps x 1 10/100Mbps x 1 10/100Mbps x 2
IP Level IP55
UV Resistance
IP65 IP55
UV Resistance
IP67
Aluminum
Operating
Temperature
-20~70 degrees C -20~70 degrees C -35~65 degrees
C
-30~75 degrees C
Operation Modes AP/Router,
WDS(4),
Repeater,
Universal Repeater,
WISP
AP, Client,
WDS(4),
Repeater,
Universal Repeater,
WISP
AP/Router,
Client, WDS(8),
Repeater,
WISP
AP/Router, Client,
WDS(8),
Repeater,
WISP

5 / 36
Product Glance –Application

6 / 36
Product Overview
Dimensions: 45 x 169mm (Φ x H)
Front View
Rear View Bottom View
Top View
169 mm
45 mm
Weight: 128g
N-Type (M)
Connector
Reset
Button
LAN Port (Passive PoE)
Pin 4, 5(+); Pin 7, 8(-)

7 / 36
Product Overview
LEDs
Signal Indicators (Client Mode)
Power
LAN

8 / 36
Product Overview
Hardware Design
LED Indicators
N-type Antenna Connector
2.4GHz Antenna
Mounting Bracket
Water-resistance
Rubber Ring
Cap
Gasket
The Antenna is required,
and must be purchased
separately.

9 / 36
Product Installation
Installation –Step 1
Connect the Antenna to the top of the WNAP-6308.

10 / 36
Product Installation
Installation –Step 2
Open the bottom of the WNAP-6308.
Plug the RJ-45 Ethernet cable into the LAN Port through the Cap and Gasket.
Then seal the bottom of the WNAP-6308 with the Cap and Gasket.
The rubber ring must be installed
to prevent the penetration of water.