Planon SlimScan SS100 User manual

PlanOn SlimScan
SS100
Quick Start
Guide

Before You Begin
Before you get started, take a moment to
familiarize yourself with your new SlimScan
SS100 portable scanner.
Note: Initially charge your SlimScan by using the
USB cable that came with it.
NEXT: The installation software is located in
your Slimscan

Software Installation:
1. SlimScan has 2 drives in its memory
named: Removable Disk and KCScan100
2. Connect SlimScan scanner to PC.
3. Install Windows Service1
4. Install SlimScan Business Card and
Receipt Manager software by double
clicking on Setup.exe on the KCScan 100
Disk directory.
by double
clicking on SvcSetup.exe on the
Removable Disk directory .
5. SlimScan is now ready to use.
1Windows Service: Installation of Windows Service is
mandatory. The service always runs in the background
and monitors the computer’s USB ports. Whenever you
connect the SlimScan scanner to one of the USB ports,
it automatically detects it and processes all the newly
scanned images.

Scanning Instructions:
1. Power ON the SlimScan scanner.
2. From scanner menu select “Scan” and
then select the folder where you want the
scanned image be saved.
3. Hold the SlimScan on the document in
vertical position.
4. Start rolling the scanner forward, keeping
it in same vertical position.
5. Stop rolling the scanner when you reach
end of document.
6. Wait for the scanner to save the image.
7. Repeat steps 1 to 6 until all documents
are scanned.
8. Connect the scanner to PC. The Windows
Service1will post-process all your newly
scanned images and the scanner will be
shown as a removable USB drive.
For detailed instructions, please refer to the user
manual. This is on your SlimScan KCScan 100 disk
drive.