SPECIFICATIONS
Talk Time Up to 11 hours¹
Standby Time Up to 16 days¹
Weight 11.5 grams
Multipoint Technology Use one headset to answer calls from either of two
paired Bluetooth-enabled phones.
Bluetooth Version Bluetooth v3.0
Bluetooth Profiles Advanced Audio Distribution Profile (A2DP), Hands-Free
(HFP) Profile 1.6 and Headset (HSP) Profile 1.2
Charge Connector Micro USB charging
Battery Type Rechargeable non-replaceable lithium ion polymer
Charge Time (Maximum) 2 hours for full charge
Operating + Storage
Temperature
32°F - 104°F (0 - 40°C)
Service & Support 1-year limited warranty
Make your mobile life easier. Streaming audio, extended battery life, whispered talk-time alerts
and noise reduction make every call worry-free. Avoid recharging even longer by using the power
switch between calls, and if you have an iPhone®, you can monitor battery life on screen. So talk
freely knowing you have the time you need and the technology you want.
M50™
MAKES CALLS WORRY-FREE
•Streamstunes,podcastsandmorefromsmartphones
•Fightsnoiseandwind
•iPhonedisplaysheadsetbatterymeter
•Powerswitchletsyouextendbatterylife
•Voicealertstellyoutalktime,volume,connection
and more
•Pairtwophonesandtakeacallfromeitherone
•Comfortablytseitherear
•WorkswithBluetooth®phones
TECHNICAL ASSISTANCE CENTER
Backed by Plantronics industry-leading global service
and support 866-363-2583 or plantronics.com/
support
For more information about the M50 or other
Plantronics products, please visit our website at
plantronics.com
CONNECT TO YOUR PHONE
Video Tutorial: plantronics.com/pairing
©2011 Plantronics, Inc. All rights reserved. Plantronics, the logo design, M50 and the Sound World graphic are trademarks or
registered trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics
is under license. All other trademarks are the property of their respective owners. U.S. Patents Pending. (10-11)
1. READY
First time, right out of the box: With the
headset turned off, activate Bluetooth
pairing mode by sliding Power switch on.
The LED flashes red/blue to indicate
pairing mode.
2. SET
Activate the Bluetooth feature on your
phone, then get phone to add / search /
discover new Bluetooth devices.
3. CONNECT
Select “PLT_M50” from the list of
Bluetooth devices shown on your phone.
If phone asks for a passcode, enter four
zeros (0000). You may see **** on screen.
Some phones also ask to confirm headset
connection after pairing. Headset
LED will stop flashing red/blue once
successfully paired/connected.
1Performance is dependent upon battery and may vary by device
Discover/
Search
PLT_M50
****
