Plantronics M55 User manual

LEARN
MORE
M25™& M55™
Bluetooth®Headset

2
TAKE A GOOD LOOK
Be safe! Please read the safety guide for important safety, charging,
battery and regulatory information before using your new headset.
VOLUME BUTTON
•Volumepresets (1 tap per level change)
INDICATOR LIGHT (LED)
•Charging(solid red until charged)
•Verylowbattery(3 red flashes at powering on)
•Pairingmode(repeating red/white flashes)
MICRO USB CHARGING PORT
•UsewithanACwallcharger
1 hour before first use
2 hours (full charge)
•Donotuseheadsetwhilecharging
CALL BUTTON
•Take/Endacall
M25:
 Takeacallorendit(1 tap)
Reject a call (1-second press)
M55:
 Takeacall(1 tap or say “Answer”)
Reject a call (1-second press or say “Ignore”)
 Endacall(1 tap)
•Redial (2 taps)
•Initiatephone’svoice-dialing
(2-second press until tone is heard)
•ReconnectlostBluetooth®connection(1 tap if
the headset doesn’t automatically reconnect)
•Activatepairingmodeafterinitialsetup
(press until LED flashes red/white)
•ExitDeepSleep™mode (1 tap)
POWER SWITCH
•On(slide back to reveal green)
•Off(slide forward to cover green)
Your headset may look slightly
different than the illustration, but
will still work as described.
A
B
D
E
C
A C
D
E
B

3
CONNECT TO YOUR PHONE
“Pairing” is the set-up
process of introducing your
headset to your phone.
Before using your headset
for the first time, you must
pair it with your Bluetooth-
enabled phone.
”Multipoint” lets you pair this
headset with two phones so
you can answer a call from
either phone.
1. READY
Firsttime,rightoutofthebox
Slide the power switch to turn the
headset on. The LED flashes red/
white to indicate pairing mode.
Pairneworsecondphone
Turn on headset. Press Call button
until the LED flashes red/white for
pairing mode.
2. SET
Activate the Bluetooth feature
on your phone, then use phone
menus to “add,” “search” or “scan”
new Bluetooth devices.
Phoneshavedifferentmenusto
selectfrom,forexample
iPhone Settings > General >
Bluetooth > On (starts the search
for devices)
BlackBerry®smartphone Settings/
options > Bluetooth: On > Search
for devices
Android™Settings > Wireless &
Networks > Bluetooth: On > Scan
for devices.
3. CONNECT
Select “PLT_M25-M29” or
“PLT_M55” from the list of
Bluetooth devices shown on
your phone.
If phone asks for a passcode, enter
four zeros (0000). You may see
**** on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
white once successfully paired/
connected.
You can now make a call using
your phone’s keypad or voice-
dialing feature.

4
TRY IT ON
The loop of the gel eartip tucks into the back curve
of your ear for a stable fit.
Try on the headset. The eartip is positioned to suit
most people, but you may want to rotate it to best
fit your left or right ear.
The gel eartip clicks into grooves on the speaker, so
that the eartip doesn’t move out of place during use.
For best voice pickup, always check that the
headset points towards the corner of your mouth.
For Left Ear
For Right Ear

5
TIPS
Stay near your phone
Bluetooth has a working “range” of up to 10 meters
(33 feet) between the phone and headset before
audio degrades and the connection is lost.
Try DeepSleep™
If you leave your headset powered on but out of
range from your paired phone for more than 90
minutes, your headset will conserve its battery
power by entering into DeepSleep mode.
This power-saving mode keeps your headset
charged for up to 5 months so it’s ready when
you need it.
Once back in range with your phone, tap the Call
button to exit DeepSleep mode. If your phone is
also ringing, tap the Call button again to answer
your call.
Know how to reconnect
Your headset tries to reconnect a lost connection.
If it can’t, then tap the Call button once or manually
reconnect via the phone’s Bluetooth device menu.
If your headset remains out of range for more
than 90 minutes, the DeepSleep mode will activate.
Turn off voice commands (M55 only)
When prompted by the headset, you can just say
“answer” or “ignore” to incoming calls – no need to
press any buttons.
If you prefer not to use the voice command feature,
you can disable it and just use the Call button.
To disable: with the headset powered on,
simultaneously press the Call button and Volume
button until you see the white LED flash twice.
To reactivate the feature: just repeat the steps and
you will again see the white LED flash twice.
*Voice commands are only available in English.
Use an iPhone to check headset battery
An icon representing the battery level of your headset
is automatically displayed on-screen beside the
phone’s battery level icon.
Listen to music and more
If your phone also has the Bluetooth “A2DP” stereo
music feature, then your music, podcasts, favorite
internet radio and other streaming audio can be
heard through this headset.

6
Use Multipoint one call at a time
With multipoint and two phones paired, it’s easy to
answer calls from either phone.
When already on a call, you will hear a ringtone
notification of the incoming call from the second
paired phone.
To answer a second call from the other phone, you
must end the current call (tap Call button) so new
call automatically answers.
If you choose not to answer the second call, it will
go to voicemail.
Listen to the voice alerts (English only)
This headset automatically announces various
status alerts:
•PowerOnorOff
•Talk-timeremaining(inhours)
•BatteryLow
•RechargeHeadset
•Phone1connected
•Phone2connected
•Lostconnection
•Nophoneisconnected
•Pairing
•Pairingsuccessful
•Pairingincomplete,restartheadset
•VolumeMaximum
•Redial
•Answerorignore?(M55only)
TIPS

7
SPECIFICATIONS
Talktime Up to 11 hours
Standbytime Up to 16 days
DeepSleepMode Up to 150 days
Operatingdistance(range) Up to 10 meters (33 feet), Class II
Headset weight 8 grams
Chargeconnector Micro USB charging
Battery type Rechargeablenon-replaceablelithiumionpolymer
Chargetime(maximum) 2 hours for full
Power requirements 5V DC – 180mA
Bluetoothversion Bluetooth v3.0
Bluetooth profiles A2DP, Hands-Free (HFP) Profile 1.6 and Headset (HSP)
Profile 1.2
Operatingtemperature 0 - 40°C (32°F - 104°F)
Storagetemperature 0 - 40°C (32°F - 104°F)
Chargingtemperature 0 - 40°C (32°F - 104°F)

8
NEED MORE HELP?
*Support in English plantronics.com/support
Plantronics Ltd
RoyalWoottonBassett,UK
Tel: [phone]
[phone]*
CzechRepublic
[phone]*
Danmark
Tel: [phone]
Plantronics GmbH
Köln, Deutschland
Kundenservice:
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
Για περισσότερες
πληροφορίες:
[phone]*
Plantronics Iberia, S.L.
Madrid, España
Tel: [phone]
Finland
Tel: [phone]
Plantronics Sarl
Noisy-le-Grand
France
Tel: [phone]
Plantronics BV
RegusHouse
Harcourt Centre
HarcourtRoad
Dublin 2, Ireland
ServiceROI:1800551896
:רתאב רקב ,ףסונ עדימל
[phone]*
További információk:
[phone]*
Plantronics Acoustics
Italia Srl, Milano, Italia
Numero Verde: 800 950934
Plantronics B.V.
Hoofddorp, Nederland
NL 0800 7526876
BE 0800 39202
LUX 800 24870
Norge
Tel: [phone]
Aby uzyskać więcej informacji:
[phone]*
Portugal
Tel: [phone]
Pentru informaţii
[phone]*
Дополнительная
информация:
8-800-200-79-92
[phone]*
Sverige
Tel: [phone]
Daha fazla bilgi için:
[phone]*
en
cs
da
de
el
es
fl
fr
ga
he
hu
it
nl
ar
no
pl
pt
ro
sv
tr
ru

AЯ46
Safety information:
see the separate “For Your Safety” booklet
2-year limited warranty details:
plantronics.com/warranty
NEED MORE HELP?
Plantronics B.V.
Scorpius 140
2132 LR Hoofddorp
Netherlands
plantronics.com/support
© 2012 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered
trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license.
All other trademarks are the property of their respective owners.
Patents US 5,712,453; Patents Pending. 87608-07 (04-12) EN-GB EEE Yönetmeliğine Uygundur