Plantronics Blackwire C510- M User manual

Getting started:
The Plantronics Blackwire headset is ready
to use with your computer and Microsoft®
Lync® 2013.
1. Connect your headset to the
computer. If this is the first time
you are connecting, wait for the
installation process to complete.
Restart the computer if directed to
do so.
Configuring Microsoft Lync 2013 to always
route call audio to the headset:
2. Click on the Options button in the
main Microsoft Lync window.
3. Select the Audio Device option.
4. Choose your Plantronics headset
for Audio Device.
5. Check the Also Ring box for
Secondary Ringer and choose your
PC speakers from the drop down
menu if you would like them to ring
for incoming calls.
6. In this screen you can also test and
adjust volumes.
7. Click Ok when finished.
Note: USB configuration settings are unique
for each USB port. If you connect the
headset to a different port you will need to
make these changes again to set behavior
for that USB port.
Blackwire®C510-M/C520-M™Quick Setup Guide
Welcome:
Using a Plantronics Blackwire headset
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer’s internal microphone
and speaker.
5
4
2
3
Blackwire C510-M/C520-M Key Features:
Manages PC calls with Smart Sensor™
convenience
One-touch call answer/end, vol +/-, and mute
Inline indicator lights and user friendly audio
tones alert the user to connection, mute and
volume status
PC wideband audio with noise-canceling
microphones for the best audio quality on calls
Take it on the go, with folding ear cushions
and included carrying case
Monaural (C510-M), Stereo (C520-M)
5
7
Control Functions:
A. Mute microphone
B. Volume adjust
C. Call answer/end

*This picture shows the
Stereo (C520-M) version
A
B
C

Making and Receiving Calls with Microsoft® Lync® 2013
To MAKE a call:
To call an existing contact, hover over the
image of the contact you’d like to call so your
communication options appear to the right
(1). Then click the phone icon to place the
call (2). You can also click the arrow next to
the phone icon and choose a different calling
option (3).
You can also enter a phone number manually
using the search box located at the top of
the main Microsoft Lync screen (4).
When a call is placed, a call window will open
and the audio will be routed to your headset.
To RECEIVE a call:
When you receive a call, a notification
window will appear in the lower right
corner of your computer screen (5).
To answer the call, simply put the
headset on. If you are already wearing
the headset, use the controls on your
headset or click on the call notification
window (6).
You can also redirect the call with one of
the choices from the options menu (7) or
ignore it (8).
©2013 Plantronics, Inc. All rights reserved. Plantronics, Smart Sensor, Blackwire, C510-M and C520-M are trademarks or registered trademarks of Plantronics, Inc. Microsoft and Lync are trademarks or registered trademarks of Microsoft Corporation in the US and
other countries. Published 03.13
5
6
8
2
4
7
1
3