Plantronics M70 Series User manual

Plantronics M70™-M90™
Series
User Guide

Contents
Welcome 3
What's in the box* 4
Select Language 5
Get paired 6
Headset Overview 7
Be safe 7
Take Control 8
Answer or end a call 8
Decline a call 8
Adjust the volume 8
Mute on/Mute off 8
Activate voice dial (phone feature) 8
Know how to reconnect 8
Change language 8
Adjust the fit 10
Charge 11
Save Power 12
Stay connected 13
More Features 14
Use two phones 14
Hear it Whisper 14
Listen to music and more 14
Support 15
2

Congratulations on purchasing your new Plantronics product. This guide contains instructions
for setting up and using your Plantronics M70™-M90™Series.
Please refer to the safety instructions for important product safety information prior to
installation or use of the product.
Welcome
3

Headphones
USB charge cable
Optional ear loop
NOTE *Contents may vary by product.
What's in the box*
4

Wearing your headset, power it on. The first time you do, you will be prompted to select your
language from a set of three options. When completed, you will hear "pairing;" go to the
"settings" menu on your phone to connect to your headset.
Select Language
5

1Activate Bluetooth®on your phone and set it to search for new devices.
•iPhone* Settings > Bluetooth > On
•Android™Smartphones* Settings > Wireless & Networks > Bluetooth: On > Scan for devices
2If necessary, enter four zeros (0000) for the passcode or accept the connection. Once
successfully paired, the indicator light stops flashing.
Get paired
6

+
Power button
Headset indicator light
Call button
Charge port
Volume button: Increases or decreases volume
Mute: Simultaneously press and hold the Volume up and Volume down button for 1-2
seconds
Track forward
Track backward
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
Headset Overview
Be safe
7

+
Tap the Call button.
Press and hold the Call button for 2 seconds.
Tap the Volume up (+) or down (–) button.
To mute the microphone, simultaneously press and hold the Volume up (+) and Volume down (–)
buttons for 1-2 seconds. You will hear “mute on”, this voice alert will be repeated once. After that
an alert tone repeats every 15 minutes when mute is on. Press and hold buttons again to un-
mute the microphone.
Activate voice dial (phone feature)
Press the Call button for 2 seconds, wait for the phone prompt and then tell the phone to dial
the name of a stored contact.
Press the Call button for 2 seconds, wait for the phone prompt and then tell the phone to dial
the name of a stored contact.
If your headset loses the Bluetooth®connection with your phone, it will automatically try to
reconnect.
If your headset can't reconnect, tap the Call button once or manually connect through the
phone's Bluetooth's device menu.
If your headset remains out of range for more than 90 minutes, the DeepSleep®mode will
activate.
Reselect the headset language at any time by putting your headset into pair mode.
Take Control
Answer or end a call
Decline a call
Adjust the volume
Mute on/Mute off
Activate voice dial (phone
feature)
Know how to reconnect
Change language
8

Press the Call button until the indicator light flashes red and blue and you hear "pairing,
please select a different language." You will once again select the headset from the devices
menu to complete the pairing process.
9

The universal-fit eartip has a thin loop that bends to gently tuck into the contours of either ear.
To adjust the fit, you can rotate the eartip on the headset or add the optional clip-on earloop.
For the best voice pickup, always check that the headset points toward the corner of your
mouth.
Adjust the fit
10