Plantronics BackBeat PRO 2 User manual

BackBeat PRO 2
BackBeat PRO 2 Special Edition
User guide

Contents
Overview 3
Volume 3
Play/pause music 3
Track selection 3
Open Listening 3
Active Noise Cancelling 3
Charge 3
Mute 4
Answer or end a call 4
Call back last call 4
Power on/off 4
Pair mode 4
Be safe 4
Pair 5
Get Paired 5
NFC pairing (Android) 5
Pair second device 5
More Features 6
Use sensors 6
Reset Sensors 6
Get Plantronics HUB 6
Support 7
2

R
3.5mm
ANC
Open Listening
OFF
Rotate the volume wheel forwards (+) or backwards (–) to control the volume.
Tap the Play/pause button.
NOTE Because your headset is equipped with sensors, if you are playing music and you take off your
headset, your music pauses. If you put on your headset, your music resumes (functionality varies by
application and there is no functionality with web-based apps).
Tap the Forward button or Back button to control the track selection.
1To hear your surroundings, slide the switch to activate Open Listening mode when not on a call.
2To increase or decrease the level, rotate the volume wheel forwards (+) or backwards (–) when
not on a call.
Slide the switch to activate or deactivate ANC to block out unwanted noise.
It takes up to 3 hours to fully charge your headphones. The LEDs turn off once charging is
complete.
=
=
=
=
=
Overview
Volume
Play/pause music
Track selection
Open Listening
Active Noise Cancelling
Charge
3

TIP To check the battery status of the headphones, tap the Call button while wearing your
headphones. Headphones must be in idle state.
Your headphones have up to 24 hours of listening time.
During a conversation, press the Mute button . You hear "mute on" or "mute off". While the
microphone is muted, an alert repeats every 15 minutes.
Tap the Call button.
NOTEBecause your headset is equipped with sensors, if a call comes in, answer the call by putting on
the headset.
Double-tap the Call button .
Slide the switch to power on or off.
Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
Mute
Answer or end a call
Call back last call
Power on/off
Pair mode
Be safe
4

The first time you power on your headphones, the pairing process begins.
NOTEIf your phone supports Near Field Communication (NFC), go to NFC pairing (Android).
1Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
2Activate Bluetooth®on your phone and set it to search for new devices.
•iPhoneSettings > Bluetooth > On*
•AndroidSettings > Bluetooth:On > Scan for devices*
NOTE *Menus may vary by device.
3Select "PLT BB PRO 2".
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear "pairing successful" and the LEDs stop flashing.
1BackBeat PRO 2 Special Edition only Ensure that NFC is on and that your phone's display is
unlocked. (Phones may vary.)
2Tap and hold the headphones to the phone's NFC tag location until NFC pairing is complete. If
necessary, accept the connection.
NOTE The headphone's NFC tag is located on the outside of the left ear cup. (Phone tag locations
vary.)
LR
1Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
2Activate Bluetooth on your second device and follow steps 2 and 3 in "Get paired".
Pair
Get Paired
NFC pairing (Android)
Pair second device
5

Smart sensors respond when you put on or take off your headphones.
Putting on your headphones will:
•Resume paused music
•Answer an incoming mobile call
Taking off your headphones will:
•Pause music (while music is playing)
Enabling or disabling sensors
When your headphones are powered on and in an idle state, press and hold the Mic button and
the Call button for more than 4 seconds until you hear "Smart sensors off". Repeat to
reactivate.
You may need to reset the sensors if they are not working as expected.
To reset the headset sensors, connect it directly to your computer's USB port, and place it, with
the ear cups up, on a flat, non-metallic surface for more than 10 seconds.
Discover how Plantronics Hub applications bring additional functionality to your headset. Go to
plantronics.com/software and download Plantronics Hub to:
• Change language (Plantronics Hub for Windows and Mac only)
• Receive firmware updates (Plantronics Hub for Windows and Mac only)
• Personalise headset settings
• Find a lost headset
More Features
Use sensors
Reset Sensors
Get Plantronics HUB
6

EN
Tel: [phone]
FI
Tel: [phone]
NO
Tel: [phone]
AR
Tel: [phone]*
FR
Tel: [phone]
PL
Tel: [phone]*
CS
Tel: [phone]*
GA
Tel: [phone]
PT
Tel: [phone]
DA
Tel: [phone]
HE
Tel: [phone]*
RO
Tel: [phone]*
DE
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
HU
Tel: [phone]*
RU
Tel: [phone]
Tel: [phone]*
EL
Tel: [phone]*
IT
Tel: [phone]
SV
Tel: [phone]
ES
Tel: [phone]
NL
NL 0800 7526876
BE 0800 39202
LUX 800 24870
TR
Tel: [phone]*
*Support in English
For warranty details, go to plantronics.com/warranty.
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc. Plantronics BV
345 Encinal Street
Santa Cruz, CA 95060
United States
South Point Building C
Scorpius 140
2132 LR Hoofddorp, Netherlands
©2016 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under licence. All
other trademarks are the property of their respective owners.
208216-07 (10.16)