Plantronics Voyager 104 User manual

Voyager 100 Series
User Guide

Contents
Pair 3
Get Paired 3
Pair second device 3
NFC pairing 3
Fit 4
Charge 5
The basics 6
Headset overview 6
Power on/off 6
Make/Take/End Calls 6
Mute 7
Adjust the volume 7
Play or pause audio 7
Track forward 7
Track backward 7
Support 8
2

The first time you power on your headphones, the pairing process begins.
1Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
2Activate Bluetooth®on your phone and set it to search for new devices.
•iPhone Settings > Bluetooth > On*
•Android Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
3Select “PLT V100 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
1Ensure NFC is on and your phone’s display is unlocked.
2Tap and hold the headphones to the phone’s NFC tag location until NFC pairing completes. If
necessary, accept the connection.
TIP Keep an eye on your Smartphone's screen for prompts to start and accept the pairing process.
Pair
Get Paired
Pair second device
NFC pairing
3

For the best fit and sound quality, adjust the headband.
1Lengthen or shorten the headband until the ear cushions fit comfortably over your ear.
2Position the stabilizer T-pad above your ear.
3Stretch and bend your headset for a perfect fit.
4To wear the microphone on the other side, rotate the boom up and over.
5Adjust the boom so it points to the corner of your mouth.
Fit
4

It takes up to 2 hours to fully charge your headphones. The LED turns off once charging is
complete.
TIP To check the battery status, press the power button towards the Bluetooth button while wearing
your headphones and not on a call.
Charge
5