Plantronics VOYAGER 520 User manual

BLUETOOTH®HEADSET
User Guide
Guide de l'utilisateur

2Plantronics Voyager 520
EN ENGLISH
TABLE OF CONTENTS
Welcome 3
What is Bluetooth? 3
Package Contents & Features 4
Charging 5
Pairing 6
Proper Fit 8
Headset Controls 9
Indicators 11
Range 11
Hands-Free Features 12
Multipoint 13
Accessories Available for Purchase 14
Troubleshooting 15
Product Specifications 16
Technical Assistance 16
Limited Warranty 16
Important Safety and Operational Information 17
Regulatory Notices 19

3
Plantronics Voyager 520
EN ENGLISH
WELCOME
Thank you for choosing the Plantronics Voyager™ 520 headset. To get the
most from your new headset, we recommend that you take the following
steps:
Read this User Guide, including all the safety information at the end of this
guide, before you use your headset.
If you need assistance, please do the following:
Follow the steps in the “Troubleshooting” section on page 15.
Contact the Plantronics Technical Assistance Center at [phone]
or visit www.plantronics.com/support.
Visit www.plantronics.com/productregistration to register your headset online
so we can provide you with the best possible service and technical support.
NOTE: If you are considering returning the product, please contact the Technical
Assistance Center first.
1.
2.
•
•
3.
WHAT IS Bluetooth?
Bluetooth wireless technology provides a way for devices to communicate
with each other using short-range radio frequency instead of wires.
Any two Bluetooth devices can communicate as long as they both have
Bluetooth turned on, they are within range and they have been paired--a
quick “handshake” process that connects the two devices.
Bluetooth range is up to 33 feet (10 metres). Obstructions, such as walls
or other electronic devices, can cause interference or shorten the effective
range. For optimal performance, place your headset and phone on the
same side of your body.

4Plantronics Voyager 520
EN ENGLISH
PACKAGE CONTENTS & FEATURES
Call control button
Wind screen
Adjustable ear loop
Ear tip
Charging jack
Noise canceling
microphone
AC charger 100 – 240V
Desktop charging cradle
1.
2.
3.
4.
5.
6.
7.
8.
3
6
87
1
1
2
5
4

5
Plantronics Voyager 520
EN ENGLISH
CHARGING
Before you use your headset for the first time, charge it for at least 1 hour.
It takes approximately 2 hours to fully charge your headset.
While your headset is charging the indicator glows red. When your
headset is fully charged, the indicator turns off.
There are two ways to charge the headset:
Use the AC charger to connect directly to a
power outlet.
Use the desktop charging cradle with the AC
charger.
Turn the charging cradle upside down and
slide off the cover.
Insert the AC charger cable into the charging
cradle.
Slide the charging cradle cover back into place.
Plug the AC charger into a power outlet.
Insert the headset into the charging cradle.
•
•
1.
2.
3.
4.
5.
Red Flashes Battery Level
1 Less than 1/3 full
2 1/3 to 2/3 full
3 More than 2/3 full
1
2
12
3
WARNING: Do not use your headset while it is connected to the charger.
CHECK THE CHARGE LEVEL
When you turn on the headset, the indicator flashes red to show the charge level.
4
5

6Plantronics Voyager 520
EN ENGLISH
PAIRING
Pairing is the process of introducing your headset to your phone. Before
using your headset for the first time, you must pair it with your Bluetooth
phone. Normally you only need to pair your headset with your phone
once. To see a demo of the pairing process, visit
www.plantronics.com/EasyToPair.
QUICKPAIR™ TECHNOLOGY
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your headset on, your
headset automatically enters pairing mode for 10 minutes. Once paired
successfully, your headset stays on for instant use.
If not successfully paired after 10 minutes, your headset automatically
powers off. When you turn the headset on again, it automatically goes
into pairing mode until successfully paired with a Bluetooth phone.
To pair your headset for the first time:
Turn ON the Bluetooth feature on your phone.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On.
See your phone’s user guide for more information.
Press and hold the call control button to turn on your headset. (The indicator
flashes red/blue to show that the headset is on and in pairing mode.)
TIP: If you don’t see the red/blue flash, press and hold the call control button to
turn your headset off, and then press and hold the call control button again until
you see the red/blue flash.
Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 520Plantronics. See your phone’s user guide for more information.
When prompted for the password, enter 0000.
When pairing is successful, the indicator on your headset flashes blue. Your
headset is now connected and ready to use.
1.
2.
3.
4.
4
3
1
2

7
Plantronics Voyager 520
EN ENGLISH
SUBSEQUENT PAIRING
If you’ve already paired your headset with another device, or you have
trouble pairing your headset, follow these steps:
Turn ON the Bluetooth feature on your phone.
TIP: For most phones, select Settings/Tools >Connections > Bluetooth >
On. See your phone’s user guide for more information.
Turn the headset off by pressing and holding the call control button until the
indicator turns red and then turns off.
Turn the headset back on by pressing and holding the call control button until the
indicator flashes red/blue. The headset is now in pairing mode.
Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 520Plantronics. See your phone’s user guide for more information.
When prompted for the password, enter 0000.
When pairing is successful, the indicator on your headset flashes blue. Your
headset is now connected and ready to use.
1.
2.
3.
4.
5.

8Plantronics Voyager 520
EN ENGLISH
PROPER FIT
Lift the ear loop.
Swivel the ear loop to the right to wear it on your left ear, or swivel it to the left
to wear it on your right ear.
Place the ear loop behind your ear.
Rotate the headset so that the speaker rests comfortably in your ear.
Align the microphone with the corner of your mouth.
TIP: Callers can hear you best when you point the microphone towards the corner
of your mouth.
1.
2.
3.
4.
5.
Right Left

9
Plantronics Voyager 520
EN ENGLISH
HEADSET CONTROLS
Action Steps
Turn on the
headset
Press and hold the call control button until the indicator
glows blue. The indicator then flashes red up to three
times to show you the battery charge level.
See “Check the charge level” on page 5 for details.
Turn off the
headset
Press and hold the call control button until the indicator
glows red. When the power is off, the indicator stays off.
Answer a call Briefly press the call control button.
Reject a call Press the call control button for 2 seconds to reject the call.
End a call Briefly press the call control button.
Make a call The call automatically transfers to your headset after you
enter the number on your phone and press send.
Adjust volume Push the call control button up to increase the listening
volume or down to decrease the volume.
See volume warning on page 17.
Transfer a call
from the headset
to the phone
Press and hold the call control button until you hear a
long low tone.
Transfer a call
from the phone
to the headset
Briefly press the call control button.

10 Plantronics Voyager 520
EN ENGLISH
TIPS
If you’re wearing the headset, you hear ascending tones when the power turns
on and descending tones when the power turns off.
When you receive a call, your phone may ring before your headset rings. Wait
until you hear the ring in your headset before you press the call control button
to answer the call.
For best performance, position your phone on the same side of your body as
your headset.
To quickly re-connect to your recently used device that is within range, briefly
press the call control button.
To cancel an outgoing call, briefly press the call control button.
If your phone supports voice dialling see Hands-Free Features on page 14 for
instructions.
•
•
•
•
•
•