Plantronics Calisto P830 User manual

Getting started:
Follow the steps below to get call answer/end controls
with your Calisto speakerphone and Cisco® IP
Communicator.
1. Connect your speakerphone to the computer. If
this is the first time you are connecting, wait for
the installation process to complete.
2. To get call control features, please download the
latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing software
on your computer.
Configuring Cisco IP Communicator to always route call
audio to the speakerphone:
3. Click the Menu icon in the upper right corner of
the Cisco IP Communicator main screen.
4. Select the Audio Tuning Wizard option.
5. Select your Plantronics speakerphone as the
default device for the Headset option.
6. We recommend you select your Plantronics
speakerphone as the default device for both
Speakerphone and Handset options as well.
7. To route the ringer through your PC speakers,
select your PC speakers for the Ringer option.
Click Next.
8. In these next few screens you can test and adjust
listening volume and microphone level.
9. When you are finished adjusting listening volume
and microphone level, click Finish.
Note: USB configuration settings are unique for each USB
port. If you connect the speakerphone to a different port you
will need to make these changes again to set behavior for
that USB port.
Calisto®P830™Quick Setup Guide
Welcome:
Using a Plantronics Calisto speakerphone
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer’s internal microphone and
speaker.
Plantronics Speakerphone
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Calisto and P830 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other countries.
Published 10.11
3
Calisto P830 Key Features:
Seamlessly switches between calls
from PC, mobile and home landline
Color display and touch sensitive keys
for intuitive visual call management
Full duplex wideband audio support
and advanced noise cancellation
Plantronics Speakerphone
Plantronics Speakerphone
PC Speakers
4
5
6
7

Making and Receiving Calls with Cisco IP Communicator
To MAKE a call:
To call an existing contact, click on the
Directories (1) icon. Click on one of the
choices given depending on your contact (2).
Then click the contact’s name (3) and hit
Dial (4).
To initiate a call by typing a phone number,
click on the main window of the Cisco IP
Communicator screen and begin dialing the
number. Then press the Enter key.
When a call is placed, a call notification will
appear in the main Cisco IP Communicator
screen, and the audio will be routed to your
speakerphone.
To RECEIVE a call:
When you receive a call, a red light will blink
on your Cisco IP Communicator screen (5)
and a call notification window will appear in
the lower right corner of your computer
screen (6).
To answer the call, use the controls on your
speakerphone or click the left pane of the
call notification window (7). To dismiss the
call, click the right pane of the call
notification window (8).
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Calisto and P830 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other countries.
Published 10.11
4
1
2
3
4
5
6
8
7