pleasant hearth GALACTICA User manual

1
ATTACH YOUR RECEIPT HERE
Serial Number ________________________________ Purchase Date _________________________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.
30-10-162
GALACTICA FIREPLACE SCREEN
MODEL #FA330S
Español p. 7
Français p.13
2018-03-23

2
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Screen 1
B Front Foot 2
C Back Foot 2
A
B
CC
B

3
SAFETY INFORMATION
WARNING
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Do not allow children to play with or around screen.
• Do not attempt to clean the screen while it is hot.
• When screen is in use, do not touch with bare hands as hot particles may stick to surface of screen.
• Make sure screen is large enough to completely cover replace opening.
• Use heat-resistant replace gloves when moving or adjusting screen.
HARDWARE CONTENTS
M6x25mm Bolt
Qty. 4
AA
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
M6 Nut
Qty. 4
BB
M6x15mm Bolt
Qty. 2
CC
Wrench
Qty. 2
DD

4
ASSEMBLY INSTRUCTIONS
Hardware Used
1. Attach the two front feet (B) to the front of the
screen (A) by inserting four M6x25mm bolts (AA)
through the pre-drilled holes in the feet (B) and
through the screen frame (A). Secure with four
M6 nuts (BB). Use a wrench (DD) to hold the bolt
(AA) in place while using the other wrench (DD) to
tighten the nut (BB). Repeat for all 4 bolts (AA)/
nuts (BB).
M6x25mm Bolt x 4
AA
M6 Nut x 4
BB
Hardware Used
2. Attach the back feet (C) to the back side of the
screen (A) by inserting one M6x15mm Bolt (CC)
into the hole in each foot (C) as illustrated in
gure 2. Adjust feet (C) to desired width. Tighten
against the screen (A) using the wrench (DD).
NOTE: The back feet are designed to adjust
to the inside width of your replace opening so
that, if desired, the screen can be placed ush
against the replace.
M6x15mm Bolt x 2
CC
Wrench
DD
Wrench
DD
1
2
B
A
BB
AA
A
CC
C

5
CARE AND MAINTENANCE
• Do not attempt to clean screen while it is hot.
• Use a soft cloth to wipe screen and stand.
• Store in a cool, clean, dry place.
1-YEAR LIMITED FRAME WARRANTY
If within one year from the date of original purchase, this item fails due to a defect in material or
workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain
warranty service, call 1-877-447-4768, Monday - Friday, 8:30 a.m. - 4:30 p.m. CST. This warranty
does not cover defects resulting from improper or abnormal use, misuse, accident, or alteration.
Failure to follow all instructions in the owner’s manual will also void this warrranty. The
manufacturer will not be liable for incidental or consequential damages, or common erosion of
outdoor products. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. This warranty gives you
specic legal rights, and you may also have other rights which vary from state to state.
GHP Group Inc.
6440 W. Howard St.
Niles, IL 60714-3302
877-447-4768

6
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-447-4768, 8:30 a.m.-4:30 p.m.,
CST, Monday - Friday.
Printed in China
PART DESCRIPTION PART #
A Screen 30-01-236
B Front Foot 30-01-237
C Back Foot 30-01-238
AA-DD Hardware Pack 30-09-539
N/A Instruction Manual 30-10-162
AA BB
CC DD
A
B
CC
B

7
30-10-162
PANTALLA DE HOGAR GALACTICA
MODELO #FA330S
ADJUNTE SU RECIBO AQUÍ
¿Preguntas, problemas, piezas faltantes?
Antes de volver a la tienda, llame a nuestro departamento de servicio al cliente al 1-877-447
4768, de lunes a viernes de 8:30 a.m. a 4:30 p.m., hora central estándar o envíenos un correo
electrónicoa [email protected]
Número de serie _____________________________ Fecha de compra ___________________________
English p.1
Français p.13
2018-03-23

8
CONTENIDO DEL PAQUETE
PIEZA DESCRIPCIÓN CANTIDAD
A Pantalla 1
B Pie frontal 2
C Pie trasero 2
A
B
CC
B

9
ADITAMENTOS
PREPARACIÓN
Antes de comenzar a ensamblar el producto, asegúrese de tener todas las piezas. Compare las
piezas con la lista del contenido del paquete y la lista de aditamentos. No intente ensamblar el pro-
ducto si falta alguna pieza o si estas están dañadas.
Tiempo estimado de ensamblaje: 5 minutos
INFORMACIÓN DE SEGURIDAD
ADVERTENCIA
Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el
producto.
• No permita que los niños jueguen con la pantalla o cerca de ella.
• No intente limpiar la pantalla mientras esté caliente.
• No toque la pantalla con las manos descubiertas cuando esté en uso, ya que podrían adherirse
partículas calientes a la supercie de la pantalla.
• Asegúrese de que la pantalla sea lo sucientemente grande para cubrir por completo la abertura de
la chimenea.
• Use guantes resistentes al calor cuando mueva o ajuste la pantalla.
Perno
M6x25mm
Cant. 4
AA
Tuerca M6
Cant. 4
BB
Perno
M6x15mm
Cant. 2
CC
Llave
Cant. 1
DD

10
INSTRUCCIONES DE ENSAMBLAJE
Ferreteria utilizado
Perno M6x25mm x 4
AA
Tuerca M6 x 4
BB
Ferreteria utilizado
2. Fije las patas posteriores (C) a la parte trasera
de la pantalla (A) insertando un perno M6 x 15
mm (CC) en el oricio de cada pata (C) como
se muestra en la gura 2. Ajuste las patas (C)
al ancho deseado. Ajústelas a la pantalla (A)
usando la llave (DD).
NOTA: Las patas posteriores están diseñadas
para ajustarse al ancho interior de la abertura de
su hogar, de modo que, si lo desea, la pantalla
se puede colocar al ras de la chimenea.
Perno M6x15mm x 2
CC
Llave
DD
1
2
B
A
BB
AA
A
CC
C
Llave
DD
1. Fije las dos patas (B) a la parte frontal de la
pantalla (A) insertando cuatro pernos M6 x 25 mm
(AA) por los oricios perforados en las patas (B) y
por el marco de la pantalla (A). Fíjelas con cuatro
tuercas M6 (BB). Utilice una llave (DD) para
sostener el perno (AA) en su lugar mientras utiliza la
otra llave (DD) para ajustar la tuerca (BB). Repita el
procedimiento con los 4 pernos (AA)/ tuercas (BB).