Plejd REL-01-2P User manual

REL-01-2P
INSTALLATION MANUAL
0311.1.8
Mains electricity
230 V/50 Hz
Standby power
0.3 W
External operating temperature
-25 to +35°C
Dimensions
46x46x18 mm
Type of switching
Relay, Micro gap (μ)
Protection
Overtemperature soware
Zero crossing switching/breaker protecon
Radio
2.4 GHz mesh
Bluetooth®
Radio range*
About 10 m indoors.
*The Plejd mesh technology extends the range by
allowing the units to communicate with each other.
Compliant to standards
Plejd AB hereby declares that the product
complies with the norms and guidelines
pursuant to Direcve 2014/53/EU.
EN 60669-1
EN 60669-2-1
EN 301489-1
EN 301489-17
EN 300328
RISK OF INJURY TO PERSON OR PROPERTY
All work on the appliance must be
carried out by an authorised electrician.
Naonal laws and regulaons
must be followed.
Further informaon can be found
in the Plejd app or at plejd.com
Plejd AB
Kroksläs fabriker 27A
431 37 Mölndal
Sweden
Manufacturer | Plejd AB
Country of manufacture | Sweden

Install the product in an appliance box or on a bracket
(not provided, MNT-01) on a DIN rail or wall.
REL-01-2P has a relay with a breaker capacity of 16 A in
resisve loads. Due to heat build-up, the maximum current
is 13 A when switching both neutral (N) and phase (L).
Dierent loads carry dierent startup currents at switch-on
and voltage drops when switching o. The following table
is therefore recommended for dierent types of lighng
load in order to ensure maximum service life.**
Connect to the product
1
Load PF
Rated
output VA Current
Halogen (230 V)/incandescent lamp 13500 W 3500 16 A
LED loads 0,9 800 W 1000 4 A
Fluorescent lamp uncompensated 0,3 700 W 2300 10 A
Fluorescent lamp compensated 0,85 1500 W 1750 8 A
Low-volt halogen electronic 0,8 1500 W 1750 8 A
Low-volt halogen convenonal 0,95 1200 W 1200 5 A
Low-energy bulbs 0,6 500 W 800 4 A
Local inputs 1 and 2 can be used for control with e.g.
- Push-buon (preset)
- Light switch
- Moon sensor
The inputs can also be used to wirelessly control one
or more products from Plejd. A double click can be used
to acvate lighng scenarios.
The sengs are easy to adjust in the app.
Control via inputs 1 2
Based on normal cable lengths and commonly
available light xtures on the market.
3000 W / 13 A when breaking 2-pole
**
*
Support
Download the Plejd app via the App Store or Google Play.
Aer supplying power to the unit based on one of the
wiring diagrams, you can use the app to install the lighng.
This requires Internet connecvity and Bluetooth® on your
phone/tablet. You do not need any addional equipment
to get started.
With the help of the app, it’s simple to congure all
relevant sengs. The app can be used to schedule
the lighng using the astronomical clock or mer, control
lighng, and wirelessly sync control switches and scenarios.
Download the app and follow the instructions
Hand over the Plejd system
Hand over the Plejd system to your customer by wring
the system code on the included scker . You’ll nd the
code in the app once you have completed the installaon.
Place the scker in the distribuon box and give the
welcome folder to the customer.
2
3
In the event of any technical quesons, please contact
Plejd customer services.
E-mail: [email protected] | Phone: [phone]
HI!
*
12
L
N
NNL LL
12
L
N
NNL
LL
REL-01-2P
1-pol brytning av L och N 2-pol brytning av L och N
1-pole switching of phase (L) 2-pole switch of phase (L)
and zero (N)
12
L
N
NNL
LL
12
L
N
NNL LL
REL-01-2P
1-pol brytning av L och N 2-pol brytning av L och N