PMV Mounts PMVMOUNTCEILING User guide

Attach mount to ceiling
Attach pole
1
2
TV Fixing Kit
Mount Assembly Kit
NOTE:
If in any doubt of the suitability of the
ceiling, it's construction or what type of
fixings to use, consult a qualified builder or
installer.
NOTE:
Do not over-tighten bolt 'A' shown in Stage 2b above.
When inserting Grub Screws 'F' as shown in Stage 2c above, insert finger-
tight so all screws are at an equal depth against inner pole. Then tighten
with allen key. Do not over-tighten these Grub Screws.
Ceiling plate
assembly
TV mounting plate,
brackets and arms
Tilt / Swivel
Assembly
1m Pole
A - M8 x 75mm Bolt
B - M8 Nut
G - M6 Nut
H - M6 x 20mm
C - M8 washer
D - M6 x 12mm Bolt
E - M6 washer
F - M6 Grub Screw
x2
x2
x4
x4
x4
x2
x6
x8
ab c
A
B
F
C
x4
I - M6 x 30mm
J - M8 x 30mm
K - M8 x 50mm
S - M6 x 20mm
L - M8 x 20mm
M - M6
N - M8 x4
Q - M8 x 6mm
R - M8 x 12.5mm
x4
x4
x2
O - M8 x 6.5mm
P - M6 x 6.5mm
x4
x4
pmvmounts.co.uk
Mounting instructions for universal ceiling TV mount & bracket.
VESA 200 / 300 / 400 / 600x400 - Universal up to 680mm X 475mm
32" to 55" (81cm to 140cm) - Up to 35Kgs
Model No.
PMVMOUNTCEILING
Factory No.
Z3255CM
ŸRead these instructions carefully before installing your equipment.
ŸInstall the mount in a suitable location using fixings which are appropriate for
the ceiling material and structure. Consult a qualified builder if you’re in any doubt as
to the structural integrity of the ceiling.
ŸDo not attempt to alter or modify any part of the ceiling mount or its attachments.
ŸDo not use if any parts are broken or appear to be damaged.
ŸTighten all bolts and fixings securely. Only use fixings provided with this bracket.
ŸDo not mount your projector close to sources or heat or moisture.
ŸAlways have a minimum of two persons to install the projector on to the mount.

Assemble TV plate
and tilt assembly
Attach TV plate
Assembly to pole
3 4
b
a
F
x4
H
G
E
D
A
B
C

Attach TV to mount Shortening main
pole
5 6
a
a
b
b
c
Cut pole
from top
Re-drill 9mm hole
through approx
30mm from pole top
Assemble pole as described
in Stages 2 to 4.