Point 65 BOBLBEE 20L User manual

i
EN 1621-2
BACK PACK
BACK PACK SYSTEM
BACK PROTECTOR: EN 1621-2
BOBLBEE 20L
USER MANUAL
ENG
READ MANUAL BEFORE USE
Back Protector for motorcycle riders and skiers.
Personal Protective Equipment
European Norm 1621-2:2003 / AC:2006
www.point65.com
[-30º — +60º C]
45
cm
TIGHTEN FIRMLY
USE WAISTBELT !
145 — 175 cm
B
EN 1621-2
B
EN 1621-2
B
2
EN 1621-2 [-30º — +60º C]
45
cm
TIGHTEN FIRMLY
USE WAISTBELT !
145 — 175 cm
B
2
EN 1621-2

Welcome to Point 65
and congratulations for investing in a high quality working tool and Personal Protective Equipment.
The BOBLBEE 20L is a highly functional sport
and working tool as well as a professional back
protector. It is also endorsed for its excellent
ergonomic properties by Ergonauts Performance
Technologists.
The BOBLBEE 20L is built to last over time, where
each part can be disassembled for maintenance
or repair. The BOBLBEE 20L is the platform for a
larger system of components and accessories,
to supply a wide range of functions for the
demanding user.
The BOBLBEE 20L is tested and approved as
back protector for motorcycle riders. For skiers,
snowboarders and skaters protecting your back is
equally important although there are no official
rules or certificates related to these individual
sports.
The BOBLBEE 20L combines user features
related to both motorcycle and bicycle riders,
skiers and skaters. The shell reduces aerodynamic
drag on the body, and without external accesso-
ries there is a minimum of straps to tail disturb-
ingly in the wind.
If you prefer activities at more moderate speeds,
there are a number of accessories to expand the
capacity and ad functions to the BOBLBEE 20L.
A mature motorcycle rider/skier is always aware
that there is little room for error and that mental
and physical preparation can mean the difference
between a safe, enjoyable ride and a potentially
disastrous one. We all ride because we love
the freedom. But freedom must be respected
whether on a motorcycle or on a mountain. Many
sport or transportation activities today takes
the human body to speeds for which we are not
designed. At Point 65 we use design and engi-
neering to make motorcycle riding or skiing safer.
Each individual, whether motorcycle rider or skier,
must always remember though, that preparation,
knowledge and common sense must always rule;
respect the environment in which you are mov-
ing, be aware that speed is always a potential
danger and know your limits.
• No back protector can offer full protection against injury.
• Spinal injuries will not be prevented by the back protector.
• Don’t drink alcohol or use illegal drugs while riding a motorcycle or skiing.
1. Wear the right gear. This product does not
replace other safety gear. Use
approved helmet and proper face and
eye protection.
2. Become familiar with the motorcycle
or ski equipment.
3. Check the motorcycle or ski equipment.
4. Be a responsible rider. Wearing Personal Protec-
tive Equipment does not guarantee your well
being. Motorcycling or skiing can result in
serious injury or death.
BOBLBEE 20L
Motorcycling and skiing
Preparing to ride:

The BOBLBEE 20L shell has been designed to
minimIze impact forces being applied to the
user’s back area, by distributing the force from a
point of impact over as large an area as possible,
thereby reducing transformed impact energy per
area unit. The BOBLBEE 20L is certified according
to Class 2 requirements, which is the higher level
of protection.
EN 1621-2:2003/AC:2006
Motorcyclists’ back protectors shall be impact
tested with an impactor designed to represent
the hazards of impacts with edges such as kerb-
stones. The impactor shall be mounted on the
appropriate guided falling mass. The specified im-
pact energy shall be within an accuracy of ± 3%
• Protectors Level 1 requirement:
• Protectors Level 2 requirement:
• BOBLBEE 20L GTO test result:
The average peak force recorded below the
anvil, in the test described by EN 1621-2:2003
/ AC:2006 shall be below 18 kN, and no single
value shall exceed 24 kN.
The average peak force recorded below the
anvil, in the test described by EN 1621-2:2003
/ AC:2006 shall be below 9 kN, and no single
value shall exceed 12 kN.
General requirements:
Back protectors for motorcyclists must fulfil the requirement that they are
safe to use, carry comfortably and suitable for their purpose. BOBLBEE 20L
fulfils the requirements.
Ergonomic requirements:
• Can you get on and off a motorcycle;
• Can you comfortably reach the controls of the motorcycle;
• Can you turn your head and trunk when on a motorcycle;
• Does the adjustment system cause discomfort;
• Does the adjustment system securely hold the protector in place;
• Can you pick something up from the floor by bending forward?
All above mentioned typical movements for motorcycle riders are possible
without problems. The requirements are fulfilled.
Normative references:
• EN 340, Schutzkleidung - Allgemeine Anforderungen.
• EN 1621-1:1997, Motorradfahrer-Schutzkleidung gegen mechanische Belas-
tung - Teil 1: Anforderungen und Prufverfahren fur Aufprall-Protektoren.
• ISO 6487, Road Vehicles - Measurement techniques in impact tests -
instrumentation.
• ISO 7000. Graphical Symbols for use on equipment - Index and synopsis.
Definitions: • EN 1621-2:2003 / AC:2006
Test performed by TüV Rheinland LGA Products GmbH, Tillystraße 2, D-90431, Germany. Notified body No. 0197. Year 2011.
Impactor test zone for a
torso length of 45 cm.
No single value exceeded 12 kN. (max. test value 4,4 kN). The
average peak force is 2,8 kN. The requirements for protectors
of the level 2 are fulfilled.
• No back protector can offer full protection against injury.
• Spinal injuries will not be prevented by the back protector.
• Don’t drink alcohol or use illegal drugs while riding a motorcycle or skiing.
• The back protection certification and requirements are only valid in CE and TUV
acknowledging countries. This certificate does not apply to the United States market.
BOBLBEE 20L back protector test results according to European norm EN 1621-2
B
2
EN 1621-2
[-30º — +60º C]
54
cm
TIGHTEN FIRMLY
USE WAISTBELT !
155 — 195 cm
B
2
EN 1621-2
45 cm

Ergonomics and adjustment
Great focus on ergonomics with body
contoured shell and bucket seat harness
derived from racing car seats. Adjustable
for unisex custom fitting between
145 cm to 175 cm.
1. Tighten shoulder straps.
Adjust the backpack firmly but without causing discomfort or restricting movement.
2. Tighten waistbelt. 3. Tighten sternum strap
1. Tighten elastic bungee cord, and make full revolu-
tion (circle) around cleat, and secure.
2. For higher speed security, pull down bungee cord
over triax buckle on both sides.
3. Compress lid further if necessary with top straps
(not all models).
1. Tighten elastic bungee cord, and position the
cord underneath the top cover, with the velcro
(orange).
2. Fold down the top flap and secure with the
ratchet lock.
3. For higher speed security, pull down bungee cord
over delta buckles on both sides.
• Make sure to pack laptop in inside sleeve compartment, and secure
with velcro straps before departing on a ride
• Use shoulder straps, waistbelt and sternum strap to ensure the back protector
requirement.
• Close and secure top lid, before riding, to ensure back protector requirement.
• Use Point 65 original waistbelts.
• Wearing the backpack loose and low will severely reduce protective characteristics.
• Refrain from overloading.
Secure the lid on GT model:
Secure the lid on GTO model:
145 cm — 175 cm
1
2
3

Boblbee Mini & Nano - Hard shell protective
pockets for phones, cameras, Ipod etc. Dirt
cover included on Mini. (Recommended for
motorcycle riders).
Multi purpose pocket - For phones, compact
cameras, passport, wallet, etc. two compart-
ments.
Dirt Cover -Highly visible
Dirt cover protects you back
pack from mud and rain
Travel pocket - For passport, boarding cards, tickets, travel
cards and pens.
X-Case - Fits in
lumbar curve. Volume
250 cu.in./2 liter.
Cargo Net - Flexible for quick and
easy access. Hand knotted. Holds
regular helmet without face
guard.(full size integral motorcy-
cle helmet net, available for the
larger BOBLBEE 25L model).
Sport Waist Belt - Padded and
adjustable waist support for
optimal ergonomic weight
distribution.
Velcro Waist Belt - Padded
and adjustable waist sup-
port for optimal ergonomic
weight distribution.
Size:
Weight:
Capacity:
53 x 32 x 19 cm
2200 g
15 - 20 liter
20,8 x 12,6 x 7,5 inches
4,8 lbs
915- 1200 Cu. in.
Max. Laptop Size: 33 x 23 x 5 cm 13 x 9 x 2 inches
• Check before a motorcycle ride that the equipment is well fastened and pockets are
closed. Tighten all loose strap ends.
• DON´T KEEP LOOSE OBJECTS IN CARGO NET WHILE RIDING A MOTORCYCLE.
BOBLBEE 20L accessories
The internal organizer is made to fit laptops, tablets, mini
tablets, Smartphones, memory-, name-, & credit cards, Letter
and A4 sized papers / notebooks as well as batteries. The
zippered compartment can be used for coins, USB sticks, keys
and other smaller items, while the net ensures that your
smaller cables etc are kept secured in place.
Internal organization and cargo
!

Maintenance
Custom building and custom painting
The BOBLBEE 20L is built to be a long lasting
companion with little requirement of mainte-
nance. Wipe the product clean regularly and
make a visual inspection that no cracks or dents
are visible in the plastic shell. Check that
stitching and buckles are intact.
Exchange any part that is defect to maintain a
workable product. Point 65 offers service of parts
through our distributors or shops.
If disassembled make sure that all parts and
components are reassembled correctly.
The shell can crack at high impact, and is design
to do so to absorb energy. Exchange shell im-
mediately, even if it is a small crack. Extensive
use can result in numerous small scratches, that
eventually will decrease the protective character-
istics of the product. Prevent the shell from being
scratched, and exchange the shell after extensive
use, even if it is intact.
Over the years we have seen incredible creativ-
ity in terms of fitting equipment to the shell
construction and state of the art custom painting
to match your motorcycle. One must be aware
though, that any alteration to the original product
may seriously affect its protective characteristics,
and must be done at your own risk. The lacquers
used by Point 65 for the original painting, have
been designed to minimize chemical affect on
the plastic.
If you never the less choose to
paint your shell, make sure to
use paints and primers that are
suitable for the application and
non-aggressive. Avoid aggressive solvents and
consult information for paints that are suitable
for the plastic type.
• DO NOT ALTER, PAINT OR MODIFY THE PRODUCT AS IT WILL AFFECT IT´S
PROTECTIVE CHARACTERISTICS. ANY ALTERATION TO THE PRODUCT IS
DONE AT YOUR OWN RISK.
• DO NOT CLEAN WITH SOLVENT. DO NOT PAINT.
• EXCHANGE DAMAGED PARTS, AND INSPECT REGULARLY FOR DEFECTS.
• PREVENT THE SHELL FROM BEING SCRATCHED, AND EXCHANGE IF HEAVILY
SCRATCHED, EVEN IF INTACT.
• For disassembling screws and nuts; use M5TORX
screw driver and M5 key for nuts.
For reassembling; make sure that the nylon lock of
the nut is tightened onto the screw.
The nylon lock will become weaker after repetitive
assembly.
• For painting, use water based paints if possible. Today
water based paints have good adhesion, are friendly
to the environment and reduce the risk of weakening
the plastic.
Advice; test your paints on the inside of the shell, in the
bottom area that will be covered with the harness.
Cut small lines with an X-acto knife, to make a cross
pattern 1 x 1 mm in the test paint, apply paint paper
tape, pull quickly to see if the adhesion is OK.
• For adding additional buckles/screw holes, drill hole
with 6 mm. Wood type cutting drill head. Do not
push, let the drill do the job.
Material Solution and Oil Patience of Uncoated Shell. Very Safe Safe Destructive Very destructive
* Shells that are lacquered in general have higher resistance. If you intend to test a solvent or primer for painting,
test on a small lacquered area that is underneath the rails, to make sure the paint does not react.
Weak
Acid
Strong
Acid
Weak
Base
Strong
Base Acetone Benzene Alcohol Ester Gasoline Petroleum
Oil
Lubricant
BOBLBEE 20L
ABS Impact
grade.
!

Environment and performance
SHELL
RAILS
CLEAT
TRIAX
WASHER
SCREW
NUT
GASKET
HARNESS
& STRAPS
Description Part Maintenenance Recycling
ABS plastic, injection molded,
high impact modified and UV
protected, NEXA automotive
lacquer and UV protected
clear coat (not all versions are
coated).
POM plastic (Acetal), injection
molded.
PA6 plastic (Nylon), injection
molded.
M5 torx socket screw, zinc-iron.
M5 nut with nylon lock, steel.
Anti corrosive elctro plating.
EPDM rubber
600 D PE (outside), tripple PU
baking Neoprene 420,210 PE
(inside lining).
PVC gasket ledge (water seal)
EPS foam nylon straps, PA6 ITW
nylon buckles.
Bungee cord; nylon and rubber.
Zippers: steel.
Wipe clean with
damp cloth/soap
and water. Restore
lacquered shells with
car polish/wax. Rub
carefully.
Maintenance free
Maintenance free
Maintenance free
Maintenance free
Clean with soap and
water. Handwash
with mild detergent
without tensides.
Tensides may harm
the water protective
PU baking
Plastic
recycling
Metal
recycling
Rubber
recycling
Cut off nylon
buckles and
recycle, NR. 7.
Leave fabric
for combus-
tion disposal.
• EXTREME LOW TEMPERATURES WILL PROGRESSIVELY DECREASE
PROTECTIVE CHARACTERISTICS.
• REFRAIN FROM STORING OUTSIDE IN DIRECT SUNLIGHT FOR EXTENDED PERIODS.
• DO NOT CHECK IN. TEMPERATURE AND PRESSURE IN CARGO HAUL CAN AFFECT
PROTECTIVE CHARACTERISTICS. THE BOBLBEE 20L IS CABIN SIZE.
• This product contains no harmful substances related to use or recycling, if handled correctly.
• Plastics used and related Material Safety Data Sheets (MSDS) are in compliance with EU
directive 91/155/EEC, and are not considered dangerous or hazardous as waste.
• Fabrics are regularly controlled against content of cadmium and heavy metals. The materials
are not considered dangerous or hazardous as waste.
• Incinerating ABS / PE, PA synthetic fabrics: waste products are; CO2, CO and carbon hydrates.
Accidental breathing of smoke from burning material ; supply fresh air.
BOBLBEE 20L Product Data
!
The materials and construction of the BOBLBEE 20L have been
designed to withstand severe conditions. All fabrics have a tripple PU
coating (polyurethane) for water protection (market standard is double
coating). Plastics and lacquers have UV protection (ultra violet) against
extended exposure to sunlight. Screws and nuts are coated with anti
corrosive plating (to withstand 400 hours salt chamber-accelerated
weather testing. Stainless steel level is approximately 600 hours,
but much heavier). Mother earths conditions do put strain on most
products, and if you care about your protective equipment you should
not store it outside over extended time, like several months or years.
Extreme cold temperature affect most materials. It is less likely for
motorcycle riders, but for snow mobile riders and skiers travelling at
low temperatures (-15º to -30ºC) the protective characteristics can be
affected to some degree. At very low temperatures your body is also
acting slower and stiffer. Act in relation to your environment. Think
twice. Checking in your BOBLBEE 20L is not recommended, as you do
not have control of the loading. Extremely low temperatures and static
pressure of up 400 kg in cargo containers can cause damage.

Patent: PCT 971 608, DE P697 05868.9,
CND 2 276 715, AUS 714 740, E 203 379,
US 6 179 186, HKpend. 00103696,
AU E 203 379, KOR 190 580, JP 3 398 753.
Designed in Sweden
Back Protector for motorcycle riders and skiers.
Read Manual before use - Personal Protective Equipment
European Norm 1621-2:2003 / AC:2006
i
BOBLBEE 20L
USER MANUAL
EN 1621-2
DO NOT
IRON
DO NOT
DRY CLEAN
DO NOT
TUMBLE
DO NOT
BLEACH
HAND
WASH
i
PREPARING TO RIDE:
1. Wear the right gear. This product does not replace
other safety gear.
2. Become familiar with the motorcycle or ski equipment.
3. Check the motorcycle or ski equipment.
4. Be a responsible rider. Personal Protective Equipment
does not guarantee your well being. Motorcycling and
skiing can result in serious injury or death.
DO NOT CLEAN SHELL WITH SOLVENT! DO NOT PAINT!
To clean shell, use damp soft cloth to wipe clean.
To recondition lacquer, use non aggressive car wax gently.
To clean textile, handwash with mild soap or washing
detergent without tensides.
EXCHANGE DAMAGED PARTS!
and leave for destruction and recycling. Do not use as a
toy.
WARRANTY INFORMATION
The BOBLBEE 20L has a limited 2 year warranty against
defects in materials and workmanship. If upon inspection, we find the
product to be defective in materials or workmanship, we will repair
or replace the product at our discretion. Damage caused by normal
wear and tear, improper use or care , accident or negligence, is not
covered under the warranty.
All warranty claims must be accompanied by an original receipt.
The word Boblbee™® and the Point 65 logotype are registered trademarks. ©Point 65 2014.
The design and function of Boblbee backpacks are protected by patents, design and copy-
right. All rights reserved.
Point 65 Sweden AB, Karlbergs Strand 4, 171 73 Solna, Sweden | [email protected] | www.point65.com
[-30º — +60º C]
45
cm
TIGHTEN FIRMLY
USE WAISTBELT !
145 — 175 cm
B
EN 1621-2
B
EN 1621-2
B
2
EN 1621-2 [-30º — +60º C]
45
cm
TIGHTEN FIRMLY
USE WAISTBELT !
145 — 175 cm
B
2
EN 1621-2
[-30º — +60º C]
45
cm
TIGHTEN FIRMLY
USE WAISTBELT !
145 — 175 cm
B
EN 1621-2
B
EN 1621-2
B
2
EN 1621-2 [-30º — +60º C]
45
cm
TIGHTEN FIRMLY
USE WAISTBELT !
145 — 175 cm
B
2
EN 1621-2