Polar Electro ZZ User manual

APP STORE IS A SERVICE MARK OF APPLE INC.
ANDROID AND GOOGLE PLAY ARE TRADEMARKS OF GOOGLE INC.
MANUFACTURED BY
POLAR ELECTRO OY
PROFESSORINTIE 5
90440 KEMPELE
FINLAND
TEL [phone]
WWW.POLAR.COM
Getting Started Guide
Learn more at support.polar.com/en/zz
English
Start training
ZZ
/polarglobal
COMPATIBLE WITH
Technical specification
BATTERY TYPE:
HEART RATE SENSOR:
WATER RESISTANCE:
1. Wear your watch and tighten the wristband.
2. Press the BACK button to
enter the main menu, tap Start
training, and then browse to a
sport prole.
3. The watch has found your
heart rate when your heart
rate is shown.
4. Tap the display to start training recording.
Heart rate training
PAUSE AND STOP TRAINING
Press the BACK button to pause your training
session. To continue training, press BACK again. To
stop the session, press and hold BACK when paused
until Recording ended is displayed.
165 mAh LI-POL BATTERY
INTERNAL OPTICAL
The radio equipment operates 2.402 - 2.480 GHz ISM frequency
band(s) and 3.1 mW maximum power.
30 M (SUITABLE FOR SWIMMING)
CABLE: BRASS, PA66+PA6, PC, TPE, CARBON STEEL, NYLON
TAKE CARE OF YOUR IGNITE
Keep your watch clean by rinsing it under running
water after each training session. Before charging,
please make sure there’s no moisture, dust or dirt
on the charging contacts of your watch and cable.
Gently wipe off any dirt or moisture. Do not charge
the watch when it’s wet.
The Polar Precision Prime optical heart rate sensor fusion
technology uses a very small, safe amount of electric current
on the skin to measure the contact of the device to your wrist
to enhance accuracy.
Wear your watch for a few minutes before you
start training to let your skin adapt to the watch
and to get accurate heart rate readings. Tighten
the wristband rmly around your wrist. The sensor
on the back must be in constant touch with your
skin and the watch should not be able to move on
your arm.
When not measuring heart rate, loosen the
wristband a bit for a more comfortable t and to
let your skin breathe.
DEVICE: ABS+GF, PMMA, STAINLESS STEEL, PA+GF
MATERIALS
Your watch syncs your training data with the
Flow mobile app automatically if your phone is
within the Bluetooth range and the Flow app is
running.
WRISTBAND: TPU (BLACK), SILICONE (WHITE, YELLOW)
STAINLESS STEEL
Training with GPS: Go outdoors and away from
tall buildings and trees. Keep your watch still
with the display upwards to catch GPS satellite
signals. The circle around the GPS icon will
turn green when the GPS is ready.
13:10
Strength training
89
GPS FITNESS WATCH
179XXXXX.00 ENG 04/2019 WINLEE

Get to know your zz
How to get started
1. To wake up and charge your watch, plug it into
a powered USB port or a USB charger with the
custom cable that came in the box.
If there is a rmware update available for your
watch, we recommend you install it during
the setup. It may take up to 10 minutes to
complete.
1. Go to flow.polar.com/start and download and
then install the Polar FlowSync data transfer
software to your computer.
2. Sign in with your Polar account or create a new
one. We’ll walk you through the sign-up and setup
within the Polar Flow web service.
AB
1. Adjust the settings by swiping the display and tap
to conrm your selection.
2. Press the BACK button to return and change a
setting.
When you do the setup from the watch, your watch
is not yet connected with Polar Flow. It’s important
that you do the setup later via option Aor B to get
the latest feature updates to your zz. In Flow you
can also see detailed analysis of your training and
monitor your progress.
C
2. To set up your watch, choose your language
and setup method. The watch gives you three
options for setup: set up (A) on your phone, (B)
on your computer or (C) on your watch. Browse
to the option most convenient for you by
swiping the display up or down. Tap the display
to conrm your selection. We recommend
option A or B.
To get accurate training and activity data, be
precise with your personal settings in the setup.
BACK
SET UP ON YOUR PHONE SET UP ON YOUR COMPUTER
SET UP ON YOUR WATCH
Settings
Start training
Daily activity
32%
MON 20
MON 20
2
1
4
8
10
11
KEY FUNCTIONS
• Tap the display to conrm selections and
choose items.
• Return, pause and stop with the BACK button.
In time view press BACK to enter the menu,
press and hold to start pairing and syncing.
• Swipe up or down to scroll.
• Swipe left or right in time view to view different
watch faces. Tap to see more detailed
information.
You have to do the pairing in the Polar Flow app and
NOT in your mobile device’s Bluetooth settings.
1. Make sure your mobile device is connected to
the internet and turn on Bluetooth®.
2. Download the Polar Flow app from the App Store
or Google Play.
3. Open the Flow app on your mobile device. The
Flow app recognizes your watch and prompts you
to start pairing it. Tap the Start button.
4. When the Bluetooth Pairing Request conrmation
message appears on your mobile device, check
that the code shown on your mobile device
matches the code shown on your watch.
5. Accept the Bluetooth pairing request on your
mobile device and conrm the pin code on
your watch by pressing the OK. Pairing done is
displayed once the pairing is completed.
6. Sign in with your Polar account or create a new
one. We’ll walk you through the sign-up and setup
within the app.
When you’re done with the settings, tap Save and
sync and your settings are synced to your watch.

POLAR IGNITE
English
This product is compliant with Directives 2014/53/
EU and 2011/65/EU. The relevant Declaration of
Conformity is available at
www.polar.com/en/regulatory_information.
Deutsch
Dieses Produkt erfüllt die Anforderungen der
Richtlinien 2014/53/EU und 2011/65/EU. Die
zugehörige Konformitätserklärung ist erhältlich
unter
www.polar.com/de/rechtliche_informationen.
Français
Ce produit est conforme aux dispositions
des directives 2014/53/UE et 2011/65/UE. La
Déclaration de Conformité correspondante est
disponible à l’adresse
www.polar.com/fr/informations_reglementaires.
Ελληνικά
Το πρϊόν αυτο είναι συμβατό με την
Ευρωπαϊκή Οδηγία 2014/53/EU και 2011/65/
EU. Η σχετική Δήλωση συμμόρφωσηϚ είναι
διαιθέσιμη στην ηλετρονική διεύθυνση
www.polar.com/el/regulatory_information.
Nederlands
Dit product voldoet aan de richtlijnen 2014/53/
EU en 2011/65/EU. De desbetreff ende
conformiteitsverklaring is beschikbaar op
www.polar.com/nl/wettelijk_verplichte_informatie.
Italiano
Questo prodotto è conforme alle Direttive
2014/53/UE e 2011/65/UE. La Dichiarazione di
conformità relativa è disponibile sul sito
www.polar.com/it/informazioni_normative.
Español
Este producto cumple con las Directivas 2014/53/
UE y 2011/65/UE. La Declaración de conformidad
correspondiente se puede encontrar en
www.polar.com/es/informacion_reguladora.
Português
Este produto está conforme às Directivas
2014/53/EU e 2011/65/EU. A respectiva
Declaração de Conformidade está disponível em
www.polar.com/pt/informacao_regulatoria.
Suomi
Tämä tuote on direktiivien 2014/53/EU ja
2011/65/EU mukainen. Asiaankuuluva
Vaatimustenmukaisuusvakuutus on luettavissa
osoitteessa
www.polar.com//lainsaadannolliset_tiedot.
Svenska
Denna produkt uppfyller direktiven 2014/53/
EU och 2011/65/EU. Tillämplig försäkran om
överensstämmelse nns tillgänglig
på www.polar.com/sv/gallande_bestammelser.
Dansk
Dette produkt er i overensstemmelse med
direktiv 2014/53/EU og 2011/65/EU. Den relevante
Erklæring om overensstemmelse ndes på
adressen
www.polar.com/da/oplysninger_om_regulering.
Norsk
Dette produktet er i samsvar med EU-direktivene
2014/53/EU og 2011/65/EU. Den relevante
samsvarserklæringen nner du på
www.polar.com/nb/informasjon_om_forskrifter.
1.0 GEN
USA
Polar Electro Oy has not approved any changes
or modications to this device by the user. Any
changes or modi cations could void the user’s
authority to operate the equipment.
FCC regulatory information
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the
equipment and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/ TV
technician for help.
This product emits radio frequency energy, but
the radiated output power of this device is far
below the FCC radio frequency exposure limits.
This equipment complies with FCC RF radiation
exposure limits forth for an uncontrolled
environment. Nevertheless, the device should
be used in such a manner that the potential for
human contact with the antenna during normal
operation is minimized.
CANADA
Polar Electro Oy has not approved any changes
or modications to this device by the user. Any
changes or modications could void the user’s
authority to operate the equipment.
Polar Electro Oy n’a approué aucune modication
apportée à l’appareil par l’utilisateur, quelle
qu’en soit la nature. Tout changement ou toute
modication peuvent annuler le droit d’utilisation
de l’appareil par l’utilisateur.
Innovation, Science and Economic Development
Canada (ISED) regulatory information
This device complies with Innovation, Science
and Economic Development Canada licence-
exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may
not cause interference, and (2) this device must
accept any interference, including interference
that may cause undesired operation
of the device.
This device complies with the safety requirements
for RF exposure in accordance with RSS-102
Issue 5 for portable use conditions.
Avis de conformité à la réglementation
d’Innovation, Sciences et Développement
économique Canada (ISDE)
Le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement
économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Cet appareil est conforme aux exigences de
sécurité concernant l’exposition aux RF selon
la norme RSS-102, 5ème édition, pour des
conditions d’utilisation portable.
Class B digital device notice
This Class B digital apparatus complies with
Canadian RSS-Gen and RSS-247.
Cet appareil numérique de la classe B est
conforme à la norme CNR-Gen et CNR-247 du
Canada.
CAN ICES-3(B)/NMB-3(B)
Compliance statement
Model number: 2Z